Forum Debian Users Gang

dmesg > log

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x1969:0x2062 (atl1c)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="f4:6d:04:bf:a7:21", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x14e4:0x4727 (wl)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="48:5d:60:fd:74:0b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

aptitude install linux-image-aptosid-amd64 linux-headers-aptosid-amd64

eth0      Link encap:Ethernet  HWaddr f4:6d:04:bf:a7:21  
          inet addr:77.65.66.233  Bcast:77.65.95.255  Mask:255.255.224.0
          inet6 addr: fe80::f66d:4ff:febf:a721/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:42 errors:0 dropped:0 overruns:0 frame:0
          TX packets:61 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000 
          RX bytes:8656 (8.4 KiB)  TX bytes:8538 (8.3 KiB)
          Interrupt:30 

eth1      Link encap:Ethernet  HWaddr 48:5d:60:fd:74:0b  
          inet6 addr: fe80::4a5d:60ff:fefd:740b/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:17 Base address:0xc000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:560 (560.0 B)  TX bytes:560 (560.0 B)

pan0      Link encap:Ethernet  HWaddr de:76:9a:a9:00:88  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Module                  Size  Used by
parport_pc             18855  0 
ppdev                   5030  0 
lp                      7462  0 
cpufreq_powersave        902  0 
cpufreq_stats           2659  0 
parport                27954  3 parport_pc,ppdev,lp
cpufreq_userspace       1992  0 
cpufreq_conservative     5162  0 
sco                     7225  2 
bridge                 39630  0 
stp                     1440  1 bridge
bnep                    9427  2 
rfcomm                 29613  0 
l2cap                  24736  6 bnep,rfcomm
crc16                   1319  1 l2cap
binfmt_misc             6431  1 
uinput                  6376  1 
fuse                   50892  1 
acpi_call               3322  0 
atl1e                  27041  0 
loop                   11799  0 
snd_hda_codec_realtek   235602  1 
joydev                  8459  0 
snd_hda_intel          20035  1 
snd_hda_codec          54244  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
i915                  255710  2 
snd_pcm                60503  2 snd_hda_intel,snd_hda_codec
uvcvideo               52079  0 
snd_seq                42881  0 
lib80211_crypt_tkip     7477  0 
snd_timer              15582  2 snd_pcm,snd_seq
videodev               29993  1 uvcvideo
drm_kms_helper         20369  1 i915
snd_seq_device          4493  1 snd_seq
v4l1_compat            11442  2 uvcvideo,videodev
btusb                   9913  2 
wl                   1937867  0 
v4l2_compat_ioctl32     8474  1 videodev
drm                   142327  3 i915,drm_kms_helper
bluetooth              41827  11 sco,bnep,rfcomm,l2cap,btusb
psmouse                49937  0 
nvidia              10670090  0 
snd                    46526  10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_i801                7830  0 
i2c_algo_bit            4225  1 i915
soundcore               4598  1 snd
i2c_core               15819  7 i915,videodev,drm_kms_helper,drm,nvidia,i2c_i801,i2c_algo_bit
serio_raw               3752  0 
pcspkr                  1699  0 
evdev                   7352  28 
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
lib80211                3654  2 lib80211_crypt_tkip,wl
rfkill                 13044  3 bluetooth
video                  17445  1 i915
wmi                     4323  0 
output                  1692  1 video
battery                 4998  0 
ac                      2192  0 
button                  4650  1 i915
processor              29935  0 
ext3                  106630  1 
jbd                    37085  1 ext3
mbcache                 5050  1 ext3
sd_mod                 29921  3 
crc_t10dif              1276  1 sd_mod
xhci                   33721  0 
ahci                   32534  2 
libata                133760  1 ahci
scsi_mod              126517  2 sd_mod,libata
uhci_hcd               18521  0 
ehci_hcd               32081  0 
atl1c                  27315  0 
usbcore               122498  6 uvcvideo,btusb,xhci,uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
thermal                11674  0 
thermal_sys            11942  3 video,processor,thermal

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=93008b81-8c6a-4e8a-bc42-e3b79fe94533 ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000af660000 (usable)
[    0.000000]  BIOS-e820: 00000000af660000 - 00000000af66e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000af66e000 - 00000000af6b0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000af6b0000 - 00000000af6c0000 (reserved)
[    0.000000]  BIOS-e820: 00000000af6c0000 - 00000000af6e0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000af6e0000 - 00000000af700000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 140000000 mask FF0000000 write-back
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 0AF700000 mask FFFF00000 uncachable
[    0.000000]   6 base 0AF800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000af700000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xaf660 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000af660000
[    0.000000]  0000000000 - 00af600000 page 2M
[    0.000000]  00af600000 - 00af660000 page 4k
[    0.000000] kernel direct mapping tables up to af660000 @ 10000-15000
[    0.000000] init_memory_mapping: 0000000100000000-0000000150000000
[    0.000000]  0100000000 - 0150000000 page 2M
[    0.000000] kernel direct mapping tables up to 150000000 @ 13000-1a000
[    0.000000] RAMDISK: 37555000 - 37fef28b
[    0.000000] ACPI: RSDP 00000000000fbf30 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000af660100 00064 (v01 A_M_I_ OEMXSDT  02001118 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000af660290 000F4 (v04 A_M_I_ OEMFACP  02001118 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000af6604a0 099E3 (v02  A1609 A1609000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000af66e000 00040
[    0.000000] ACPI: APIC 00000000af660390 0006C (v02 A_M_I_ OEMAPIC  02001118 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000af660400 0003C (v01 A_M_I_ OEMMCFG  02001118 MSFT 00000097)
[    0.000000] ACPI: ECDT 00000000af660440 00055 (v01 A_M_I_ OEMECDT  02001118 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000af66e040 00061 (v01 A_M_I_ AMI_OEM  02001118 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000af669e90 00038 (v01 A_M_I_ OEMHPET  02001118 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000af66e0b0 02024 (v01 A_M_I_ GMCHSCI  02001118 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000af6708a0 004F0 (v01  PmRef    CpuPm 00003000 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000150000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000150000000
[    0.000000]   NODE_DATA [0000000000015000 - 000000000001cfff]
[    0.000000]   bootmap [000000000001d000 -  0000000000046fff] pages 2a
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 000168a454]    TEXT DATA BSS ==> [0001000000 - 000168a454]
[    0.000000]   #3 [0037555000 - 0037fef28b]          RAMDISK ==> [0037555000 - 0037fef28b]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [000168b000 - 000168b24b]              BRK ==> [000168b000 - 000168b24b]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000]   #7 [0000013000 - 0000015000]          PGTABLE ==> [0000013000 - 0000015000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00150000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000af660
[    0.000000]     0: 0x00100000 -> 0x00150000
[    0.000000] On node 0 totalpages: 1045999
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3823 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 700056 pages, LIFO batch:31
[    0.000000]   Normal zone: 4480 pages used for memmap
[    0.000000]   Normal zone: 323200 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000af660000 - 00000000af66e000
[    0.000000] PM: Registered nosave memory: 00000000af66e000 - 00000000af6b0000
[    0.000000] PM: Registered nosave memory: 00000000af6b0000 - 00000000af6c0000
[    0.000000] PM: Registered nosave memory: 00000000af6c0000 - 00000000af6e0000
[    0.000000] PM: Registered nosave memory: 00000000af6e0000 - 00000000af700000
[    0.000000] PM: Registered nosave memory: 00000000af700000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at af700000 (gap: af700000:4f700000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u524288
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027079
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=93008b81-8c6a-4e8a-bc42-e3b79fe94533 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff88000559e000 - ffff88000959e000
[    0.000000] software IO TLB at phys 0x559e000 - 0x959e000
[    0.000000] Memory: 4040184k/5505024k available (3081k kernel code, 1321028k absent, 143812k reserved, 1890k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1800.207 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.41 BogoMIPS (lpj=7200828)
[    0.004051] Security Framework initialized
[    0.004058] SELinux:  Disabled at boot.
[    0.008083] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011486] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013041] Mount-cache hash table entries: 256
[    0.013295] Initializing cgroup subsys ns
[    0.013303] Initializing cgroup subsys cpuacct
[    0.013312] Initializing cgroup subsys devices
[    0.013316] Initializing cgroup subsys freezer
[    0.013321] Initializing cgroup subsys net_cls
[    0.013368] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.013373] CPU: L2 cache: 512K
[    0.013379] CPU 0/0x0 -> Node 0
[    0.013383] CPU: Physical Processor ID: 0
[    0.013386] CPU: Processor Core ID: 0
[    0.013392] mce: CPU supports 5 MCE banks
[    0.013404] CPU0: Thermal monitoring enabled (TM1)
[    0.013411] using mwait in idle threads.
[    0.013414] Performance Events: Atom events, Intel PMU driver.
[    0.013424] ... version:                3
[    0.013428] ... bit width:              40
[    0.013431] ... generic registers:      2
[    0.013435] ... value mask:             000000ffffffffff
[    0.013439] ... max period:             000000007fffffff
[    0.013442] ... fixed-purpose events:   3
[    0.013446] ... event mask:             0000000700000003
[    0.014767] ACPI: Core revision 20090903
[    0.032107] Setting APIC routing to flat
[    0.032453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075118] CPU0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.076001] Booting processor 1 APIC 0x2 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU 1/0x2 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.160097] CPU1: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.160111] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.164176] Booting processor 2 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#2
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU 2/0x1 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU2: Thermal monitoring enabled (TM1)
[    0.252105] CPU2: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.252119] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.256202] Booting processor 3 APIC 0x3 ip 0x6000
[    0.008000] Initializing CPU#3
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU 3/0x3 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU3: Thermal monitoring enabled (TM1)
[    0.344119] CPU3: Intel(R) Atom(TM) CPU D525   @ 1.80GHz stepping 0a
[    0.344132] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.348024] Brought up 4 CPUs
[    0.348031] Total of 4 processors activated (14400.39 BogoMIPS).
[    0.349378] CPU0 attaching sched-domain:
[    0.349386]  domain 0: span 0,2 level SIBLING
[    0.349391]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[    0.349403]   domain 1: span 0,2 level MC
[    0.349408]    groups: 0,2 (cpu_power = 1178)
[    0.349417]    domain 2: span 0-3 level CPU
[    0.349421]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[    0.349437] CPU1 attaching sched-domain:
[    0.349442]  domain 0: span 1,3 level SIBLING
[    0.349447]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[    0.349458]   domain 1: span 1,3 level MC
[    0.349462]    groups: 1,3 (cpu_power = 1178)
[    0.349471]    domain 2: span 0-3 level CPU
[    0.349475]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[    0.349489] CPU2 attaching sched-domain:
[    0.349493]  domain 0: span 0,2 level SIBLING
[    0.349498]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[    0.349509]   domain 1: span 0,2 level MC
[    0.349513]    groups: 0,2 (cpu_power = 1178)
[    0.349522]    domain 2: span 0-3 level CPU
[    0.349526]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[    0.349540] CPU3 attaching sched-domain:
[    0.349544]  domain 0: span 1,3 level SIBLING
[    0.349549]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[    0.349560]   domain 1: span 1,3 level MC
[    0.349564]    groups: 1,3 (cpu_power = 1178)
[    0.349573]    domain 2: span 0-3 level CPU
[    0.349577]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[    0.349888] devtmpfs: initialized
[    0.354761] regulator: core version 0.5
[    0.354761] NET: Registered protocol family 16
[    0.354761] ACPI: bus type pci registered
[    0.354761] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.354761] PCI: Not using MMCONFIG.
[    0.354761] PCI: Using configuration type 1 for base access
[    0.356445] bio: create slab <bio-0> at 0
[    0.357503] ACPI: EC: EC description table is found, configuring boot EC
[    0.360633] ACPI: Executed 1 blocks of module-level executable AML code
[    0.374058] ACPI: Interpreter enabled
[    0.374066] ACPI: (supports S0 S3 S4 S5)
[    0.374114] ACPI: Using IOAPIC for interrupt routing
[    0.374229] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.376672] ACPI: BIOS _OSI(Linux) query ignored
[    0.378825] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.396969] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.409461] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.410636] ACPI: No dock devices found.
[    0.410889] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.411015] pci 0000:00:02.0: reg 10 32bit mmio: [0xf5d00000-0xf5d7ffff]
[    0.411024] pci 0000:00:02.0: reg 14 io port: [0xcc00-0xcc07]
[    0.411031] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xb0000000-0xbfffffff]
[    0.411039] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf5c00000-0xf5cfffff]
[    0.411077] pci 0000:00:02.1: reg 10 32bit mmio: [0xf5d80000-0xf5dfffff]
[    0.411171] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf5bf8000-0xf5bfbfff]
[    0.411217] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.411224] pci 0000:00:1b.0: PME# disabled
[    0.411293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.411300] pci 0000:00:1c.0: PME# disabled
[    0.411369] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.411376] pci 0000:00:1c.1: PME# disabled
[    0.411445] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.411452] pci 0000:00:1c.2: PME# disabled
[    0.411521] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.411528] pci 0000:00:1c.3: PME# disabled
[    0.411590] pci 0000:00:1d.0: reg 20 io port: [0xc400-0xc41f]
[    0.411647] pci 0000:00:1d.1: reg 20 io port: [0xc480-0xc49f]
[    0.411701] pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
[    0.411755] pci 0000:00:1d.3: reg 20 io port: [0xc880-0xc89f]
[    0.411816] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf5bf7c00-0xf5bf7fff]
[    0.411870] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.411877] pci 0000:00:1d.7: PME# disabled
[    0.412099] pci 0000:00:1f.2: reg 10 io port: [0xc080-0xc087]
[    0.412108] pci 0000:00:1f.2: reg 14 io port: [0xc000-0xc003]
[    0.412117] pci 0000:00:1f.2: reg 18 io port: [0xbc00-0xbc07]
[    0.412126] pci 0000:00:1f.2: reg 1c io port: [0xb880-0xb883]
[    0.412135] pci 0000:00:1f.2: reg 20 io port: [0xb800-0xb81f]
[    0.412146] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf5bf7800-0xf5bf7bff]
[    0.412180] pci 0000:00:1f.2: PME# supported from D3hot
[    0.412187] pci 0000:00:1f.2: PME# disabled
[    0.412246] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.412423] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[    0.412471] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.412519] pci 0000:05:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
[    0.412546] pci 0000:05:00.0: reg 24 io port: [0xec00-0xec7f]
[    0.412572] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfbf00000-0xfbf7ffff]
[    0.413109] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[    0.413117] pci 0000:00:1c.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[    0.413126] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[    0.413226] pci 0000:03:00.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
[    0.413300] pci 0000:03:00.0: supports D1 D2
[    0.413305] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.413313] pci 0000:03:00.0: PME# disabled
[    0.420139] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf9ffffff]
[    0.420149] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xc8000000-0xcdffffff]
[    0.420218] pci 0000:02:00.0: reg 10 64bit mmio: [0xf5fc0000-0xf5ffffff]
[    0.420229] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f]
[    0.420295] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.420303] pci 0000:02:00.0: PME# disabled
[    0.428094] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[    0.428102] pci 0000:00:1c.2: bridge 32bit mmio: [0xf5f00000-0xf5ffffff]
[    0.428188] pci 0000:01:00.0: reg 10 64bit mmio: [0xf5efe000-0xf5efffff]
[    0.428274] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.428282] pci 0000:01:00.0: PME# disabled
[    0.436113] pci 0000:00:1c.3: bridge 32bit mmio: [0xf5e00000-0xf5efffff]
[    0.436179] pci 0000:00:1e.0: transparent bridge
[    0.436222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.436538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.436683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.436781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.436879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.461865] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.462113] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.462357] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.462600] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.462843] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.463096] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.463338] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.463581] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.463809] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.463836] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
[    0.463844] vgaarb: loaded
[    0.464024] PCI: Using ACPI for IRQ routing
[    0.464358] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.464367] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.464376] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.476032] Switching to clocksource tsc
[    0.478216] pnp: PnP ACPI init
[    0.478275] ACPI: bus type pnp registered
[    0.482560] pnp: PnP ACPI: found 13 devices
[    0.482566] ACPI: ACPI bus type pnp unregistered
[    0.482590] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.482597] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.482616] system 00:08: ioport range 0x25c-0x25f has been reserved
[    0.482622] system 00:08: ioport range 0x380-0x383 has been reserved
[    0.482629] system 00:08: ioport range 0x400-0x41f has been reserved
[    0.482635] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.482642] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.482648] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.482656] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.482662] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.482669] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.482676] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.482688] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[    0.482701] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.482708] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.482719] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.482731] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.482737] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.482744] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.482751] system 00:0c: iomem range 0x100000-0xaf6fffff could not be reserved
[    0.482758] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.487927] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[    0.487935] pci 0000:00:1c.0:   IO window: 0xe000-0xefff
[    0.487943] pci 0000:00:1c.0:   MEM window: 0xfa000000-0xfbffffff
[    0.487951] pci 0000:00:1c.0:   PREFETCH window: 0x000000ce000000-0x000000dfffffff
[    0.487960] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.487966] pci 0000:00:1c.1:   IO window: 0x1000-0x1fff
[    0.487974] pci 0000:00:1c.1:   MEM window: 0xf6000000-0xf9ffffff
[    0.487981] pci 0000:00:1c.1:   PREFETCH window: 0x000000c8000000-0x000000cdffffff
[    0.487990] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[    0.487996] pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
[    0.488003] pci 0000:00:1c.2:   MEM window: 0xf5f00000-0xf5ffffff
[    0.488010] pci 0000:00:1c.2:   PREFETCH window: 0x000000c0000000-0x000000c01fffff
[    0.488019] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[    0.488025] pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
[    0.488032] pci 0000:00:1c.3:   MEM window: 0xf5e00000-0xf5efffff
[    0.488039] pci 0000:00:1c.3:   PREFETCH window: 0x000000c0200000-0x000000c03fffff
[    0.488049] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.488053] pci 0000:00:1e.0:   IO window: disabled
[    0.488059] pci 0000:00:1e.0:   MEM window: disabled
[    0.488065] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.488088]   alloc irq_desc for 16 on node -1
[    0.488093]   alloc kstat_irqs on node -1
[    0.488106] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.488114] pci 0000:00:1c.0: setting latency timer to 64
[    0.488127] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.488134]   alloc irq_desc for 17 on node -1
[    0.488137]   alloc kstat_irqs on node -1
[    0.488146] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.488153] pci 0000:00:1c.1: setting latency timer to 64
[    0.488166]   alloc irq_desc for 18 on node -1
[    0.488170]   alloc kstat_irqs on node -1
[    0.488177] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.488185] pci 0000:00:1c.2: setting latency timer to 64
[    0.488196] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[    0.488203]   alloc irq_desc for 19 on node -1
[    0.488207]   alloc kstat_irqs on node -1
[    0.488215] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.488222] pci 0000:00:1c.3: setting latency timer to 64
[    0.488232] pci 0000:00:1e.0: setting latency timer to 64
[    0.488240] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.488246] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.488252] pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
[    0.488258] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
[    0.488263] pci_bus 0000:05: resource 2 pref mem [0xce000000-0xdfffffff]
[    0.488269] pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
[    0.488274] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf9ffffff]
[    0.488280] pci_bus 0000:03: resource 2 pref mem [0xc8000000-0xcdffffff]
[    0.488286] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.488291] pci_bus 0000:02: resource 1 mem: [0xf5f00000-0xf5ffffff]
[    0.488296] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc01fffff]
[    0.488302] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.488307] pci_bus 0000:01: resource 1 mem: [0xf5e00000-0xf5efffff]
[    0.488313] pci_bus 0000:01: resource 2 pref mem [0xc0200000-0xc03fffff]
[    0.488319] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.488325] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.488400] NET: Registered protocol family 2
[    0.488757] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.491823] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.496818] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.497410] TCP: Hash tables configured (established 524288 bind 65536)
[    0.497416] TCP reno registered
[    0.497648] NET: Registered protocol family 1
[    0.497686] pci 0000:00:02.0: Boot video device
[    0.499958] pci 0000:01:00.0: xHCI HW did not halt within 2000 usec status = 0x0
[    0.500066] Unpacking initramfs...
[    0.989812] Freeing initrd memory: 10856k freed
[    0.997967] audit: initializing netlink socket (disabled)
[    0.997989] type=2000 audit(1312132116.995:1): initialized
[    1.003625] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.006917] VFS: Disk quotas dquot_6.5.2
[    1.007050] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.007226] msgmni has been set to 7912
[    1.007766] alg: No test for stdrng (krng)
[    1.007893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.007899] io scheduler noop registered
[    1.007903] io scheduler anticipatory registered
[    1.007907] io scheduler deadline registered
[    1.007987] io scheduler cfq registered (default)
[    1.008194]   alloc irq_desc for 24 on node -1
[    1.008199]   alloc kstat_irqs on node -1
[    1.008217] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    1.008230] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.008402]   alloc irq_desc for 25 on node -1
[    1.008406]   alloc kstat_irqs on node -1
[    1.008419] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    1.008430] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.009033]   alloc irq_desc for 26 on node -1
[    1.009038]   alloc kstat_irqs on node -1
[    1.009055] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    1.009066] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.009245]   alloc irq_desc for 27 on node -1
[    1.009249]   alloc kstat_irqs on node -1
[    1.009262] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[    1.009274] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.013039] Linux agpgart interface v0.103
[    1.013070] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[    1.013356] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    1.024151] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.024250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.024992] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.025119] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.043866] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.043882] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.044118] mice: PS/2 mouse device common for all mice
[    1.044199] rtc_cmos 00:03: RTC can wake from S4
[    1.044304] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.044344] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.044380] cpuidle: using governor ladder
[    1.044385] cpuidle: using governor menu
[    1.044400] No iBFT detected.
[    1.045185] TCP cubic registered
[    1.045451] NET: Registered protocol family 10
[    1.047026] Mobile IPv6
[    1.047033] NET: Registered protocol family 17
[    1.047243] PM: Resume from disk failed.
[    1.047265] registered taskstats version 1
[    1.047947] rtc_cmos 00:03: setting system clock to 2011-07-31 17:08:37 UTC (1312132117)
[    1.048041] Initalizing network drop monitor service
[    1.048105] Freeing unused kernel memory: 592k freed
[    1.048417] Write protecting the kernel read-only data: 4236k
[    1.062045] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.081178] udev[76]: starting version 164
[    1.193934] thermal LNXTHERM:01: registered as thermal_zone0
[    1.193965] ACPI: Thermal Zone [TZ00] (65 C)
[    1.249905] usbcore: registered new interface driver usbfs
[    1.249989] usbcore: registered new interface driver hub
[    1.250346] usbcore: registered new device driver usb
[    1.255405] atl1c 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.255432] atl1c 0000:02:00.0: setting latency timer to 64
[    1.261715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.261795]   alloc irq_desc for 23 on node -1
[    1.261802]   alloc kstat_irqs on node -1
[    1.261822] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.261894] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.261903] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.261963] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.262047] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.262066] ehci_hcd 0000:00:1d.7: debug port 1
[    1.265488] uhci_hcd: USB Universal Host Controller Interface driver
[    1.265958] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.266370] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5bf7c00
[    1.281026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.281078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.281084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.281090] usb usb1: Product: EHCI Host Controller
[    1.281094] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    1.281099] usb usb1: SerialNumber: 0000:00:1d.7
[    1.281271] usb usb1: configuration #1 chosen from 1 choice
[    1.281368] hub 1-0:1.0: USB hub found
[    1.281392] hub 1-0:1.0: 8 ports detected
[    1.281578] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.281601] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.281610] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.281650] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.281701] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[    1.281835] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.281844] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.281851] usb usb2: Product: UHCI Host Controller
[    1.281857] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.281864] usb usb2: SerialNumber: 0000:00:1d.0
[    1.282115] usb usb2: configuration #1 chosen from 1 choice
[    1.282216] hub 2-0:1.0: USB hub found
[    1.282238] hub 2-0:1.0: 2 ports detected
[    1.282398] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.282416] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.282424] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.282447] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.282516] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[    1.282629] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.282637] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.282644] usb usb3: Product: UHCI Host Controller
[    1.282651] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.282657] usb usb3: SerialNumber: 0000:00:1d.1
[    1.282866] usb usb3: configuration #1 chosen from 1 choice
[    1.282964] hub 3-0:1.0: USB hub found
[    1.282984] hub 3-0:1.0: 2 ports detected
[    1.283121] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.283139] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.283147] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.283170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.283236] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    1.283353] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.283361] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.283368] usb usb4: Product: UHCI Host Controller
[    1.283374] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.283381] usb usb4: SerialNumber: 0000:00:1d.2
[    1.283593] usb usb4: configuration #1 chosen from 1 choice
[    1.283700] hub 4-0:1.0: USB hub found
[    1.283721] hub 4-0:1.0: 2 ports detected
[    1.283851] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.283870] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.283878] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.283903] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.283970] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[    1.284087] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.284095] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.284102] usb usb5: Product: UHCI Host Controller
[    1.284108] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.284115] usb usb5: SerialNumber: 0000:00:1d.3
[    1.284321] usb usb5: configuration #1 chosen from 1 choice
[    1.284420] hub 5-0:1.0: USB hub found
[    1.284440] hub 5-0:1.0: 2 ports detected
[    1.300672] SCSI subsystem initialized
[    1.338683] libata version 3.00 loaded.
[    1.346852] ahci 0000:00:1f.2: version 3.0
[    1.346885]   alloc irq_desc for 21 on node -1
[    1.346891]   alloc kstat_irqs on node -1
[    1.346910] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.347010]   alloc irq_desc for 28 on node -1
[    1.347016]   alloc kstat_irqs on node -1
[    1.347035] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.347135] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    1.347147] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    1.347157] ahci 0000:00:1f.2: setting latency timer to 64
[    1.347375] scsi0 : ahci
[    1.347639] scsi1 : ahci
[    1.347849] scsi2 : ahci
[    1.348053] scsi3 : ahci
[    1.348596] ata1: SATA max UDMA/133 abar m1024@0xf5bf7800 port 0xf5bf7900 irq 28
[    1.348602] ata2: DUMMY
[    1.348607] ata3: DUMMY
[    1.348610] ata4: DUMMY
[    1.354557] xhci_hcd 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.354642] xhci_hcd 0000:01:00.0: setting latency timer to 64
[    1.354652] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.354690] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
[    1.354898] xhci_hcd 0000:01:00.0: irq 19, io mem 0xf5efe000
[    1.358234] usb usb6: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[    1.358265] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.358274] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.358281] usb usb6: Product: xHCI Host Controller
[    1.358288] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[    1.358294] usb usb6: SerialNumber: 0000:01:00.0
[    1.358694] usb usb6: configuration #1 chosen from 1 choice
[    1.358707] xHCI xhci_add_endpoint called for root hub
[    1.358714] xHCI xhci_check_bandwidth called for root hub
[    1.358930] hub 6-0:1.0: USB hub found
[    1.358958] hub 6-0:1.0: 4 ports detected
[    1.381957] atl1c 0000:02:00.0: version 1.0.0.2-NAPI
[    1.592020] usb 1-6: new high speed USB device using ehci_hcd and address 2
[    1.668026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.669348] ACPI Warning for \_SB_.PCI0.IDE1.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    1.669364] ata1.00: _GTF unexpected object type 0x1
[    1.715889] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
[    1.715896] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.718361] ata1.00: _GTF unexpected object type 0x1
[    1.718746] ata1.00: configured for UDMA/133
[    1.732212] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0003 PQ: 0 ANSI: 5
[    1.746691] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.746862] sd 0:0:0:0: [sda] Write Protect is off
[    1.746869] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.746939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.747362]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.806384] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.809983] usb 1-6: New USB device found, idVendor=13d3, idProduct=5711
[    1.809991] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.809997] usb 1-6: Product: USB 2.0 UVC VGA WebCam
[    1.810001] usb 1-6: Manufacturer: Azurewave
[    1.810005] usb 1-6: SerialNumber: 0x0001
[    1.810180] usb 1-6: configuration #1 chosen from 1 choice
[    2.172031] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.347917] usb 5-1: New USB device found, idVendor=13d3, idProduct=3315
[    2.347925] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.347930] usb 5-1: Product: Bluetooth module
[    2.347935] usb 5-1: Manufacturer: Broadcom Corp
[    2.347939] usb 5-1: SerialNumber: 74F06DD977C1
[    2.348116] usb 5-1: configuration #1 chosen from 1 choice
[    2.643740] PM: Starting manual resume from disk
[    2.643748] PM: Resume from partition 8:6
[    2.643751] PM: Checking hibernation image.
[    2.665021] PM: Error -22 checking image file
[    2.665025] PM: Resume from disk failed.
[    2.732888] kjournald starting.  Commit interval 5 seconds
[    2.732901] EXT3-fs: mounted filesystem with ordered data mode.
[    4.368961] udev[398]: starting version 164
[    4.758599] ACPI: SSDT 00000000af670170 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 20060113)
[    4.761898] ACPI: AC Adapter [AC0] (on-line)
[    4.764309] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    4.769389] ACPI: Lid Switch [LID]
[    4.769622] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    4.769637] ACPI: Sleep Button [SLPB]
[    4.769834] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    4.769848] ACPI: Power Button [PWRB]
[    4.780506] Monitor-Mwait will be used to enter C-1 state
[    4.780671] processor LNXCPU:00: registered as cooling_device0
[    4.780900] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    4.780917] ACPI: Power Button [PWRF]
[    4.782217] ACPI: SSDT 00000000af6700e0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060113)
[    4.784670] processor LNXCPU:01: registered as cooling_device1
[    4.785985] processor LNXCPU:02: registered as cooling_device2
[    4.786636] processor LNXCPU:03: registered as cooling_device3
[    4.865565] ACPI: Battery Slot [BAT0] (battery present)
[    4.936698] ACPI: WMI: Mapper loaded
[    5.124939] lib80211: common routines for IEEE802.11 drivers
[    5.124948] lib80211_crypt: registered algorithm 'NULL'
[    5.198849] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.311267] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    5.311282] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[    5.311366] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.296036] nvidia: module license 'NVIDIA' taints kernel.
[    6.296043] Disabling lock debugging due to kernel taint
[    7.398398] Bluetooth: Core ver 2.15
[    7.398723] NET: Registered protocol family 31
[    7.398728] Bluetooth: HCI device and connection manager initialized
[    7.398735] Bluetooth: HCI socket layer initialized
[    7.506950] [drm] Initialized drm 1.1.0 20060810
[    7.624106] nvidia 0000:05:00.0: power state changed by ACPI to D0
[    7.624132] nvidia 0000:05:00.0: power state changed by ACPI to D0
[    7.624147] nvidia 0000:05:00.0: enabling device (0000 -> 0003)
[    7.624163] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.624190] nvidia 0000:05:00.0: setting latency timer to 64
[    7.624201] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=none
[    7.624691] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  195.36.31  Thu Jun  3 08:19:50 PDT 2010
[    7.969494] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.969506] wl 0000:03:00.0: setting latency timer to 64
[    7.974730] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.975123] usbcore: registered new interface driver btusb
[    8.014522] Linux video capture interface: v2.00
[    8.029905] lib80211_crypt: registered algorithm 'TKIP'
[    8.030261] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 
[    8.098926] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[    8.116630] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input7
[    8.116805] usbcore: registered new interface driver uvcvideo
[    8.116816] USB Video Class driver (v0.1.0)
[    8.207906] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.207917] i915 0000:00:02.0: setting latency timer to 64
[    8.235851] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[    8.235859] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    8.236014]   alloc irq_desc for 29 on node -1
[    8.236020]   alloc kstat_irqs on node -1
[    8.236036] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    8.236063] [drm] set up 7M of stolen space
[    8.338817] [drm] initialized overlay support
[    8.342552] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0400
[    8.415195] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    8.792021] [drm] Big FIFO is enabled
[    8.792035] [drm] Big FIFO is enabled
[    9.872647] Console: switching to colour frame buffer device 170x48
[    9.883034] fb0: inteldrmfb frame buffer device
[    9.883039] registered panic notifier
[    9.883229] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[    9.883489] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/LNXVIDEO:00/input/input9
[    9.883602] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    9.885609] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
[    9.901798] acpi device:2b: registered as cooling_device4
[    9.902131] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[    9.902292] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    9.902365] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.902480]   alloc irq_desc for 22 on node -1
[    9.902486]   alloc kstat_irqs on node -1
[    9.902506] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.902618] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.152357] hda_codec: ALC269: BIOS auto-probing.
[   10.152562] hda_codec: connection list not available for 0x24
[   10.152931] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[   11.298073] Adding 3236856k swap on /dev/sda6.  Priority:-1 extents:1 across:3236856k 
[   11.604999] EXT3 FS on sda5, internal journal
[   11.698079] loop: module loaded
[   11.794132] acpi_call: Module loaded successfully
[   13.312123] fuse init (API version 7.13)
[   15.425418] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[   16.574672]   alloc irq_desc for 30 on node -1
[   16.574679]   alloc kstat_irqs on node -1
[   16.574703] atl1c 0000:02:00.0: irq 30 for MSI/MSI-X
[   16.574818] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   21.882087] Bluetooth: L2CAP ver 2.14
[   21.882093] Bluetooth: L2CAP socket layer initialized
[   21.990908] Bluetooth: RFCOMM TTY layer initialized
[   21.990920] Bluetooth: RFCOMM socket layer initialized
[   21.990926] Bluetooth: RFCOMM ver 1.11
[   22.020999] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.021006] Bluetooth: BNEP filters: protocol multicast
[   22.217823] Bridge firewalling registered
[   22.599415] Bluetooth: SCO (Voice Link) ver 0.6
[   22.599422] Bluetooth: SCO socket layer initialized
[   23.875931] lp: driver loaded but no devices found
[   24.104516] ppdev: user-space parallel port driver
[   26.884008] eth1: no IPv6 routers present
[   27.175330] acpi_call: Calling \_SB.PCI0.P0P4.GFX0._DSM
[   27.175792] acpi_call: Call successful: {0x59, 0x00, 0x00, 0x11}
[   27.177905] acpi_call: Calling \_SB.PCI0.P0P4.GFX0._PS3
[   27.333727] acpi_call: Call successful: 0x0
[   27.338288] acpi_call: Calling \_SB.PCI0.P0P4.GFX0.P3MO
[   27.338321] acpi_call: Call successful: 0x0
[   27.340262] acpi_call: Calling \_SB.PCI0.P0P4.GFX0.DGPS
[   27.340296] acpi_call: Call successful: 0x1
[   27.342399] acpi_call: Calling \_SB.PCI0.P0P4.GFX0._PSC
[   27.342435] acpi_call: Call successful: 0x3
[   27.400023] eth0: no IPv6 routers present
[   27.732355] ata1.00: configured for UDMA/133
[   27.732363] ata1: EH complete
[   28.228901] CPU0 attaching NULL sched-domain.
[   28.228912] CPU1 attaching NULL sched-domain.
[   28.228917] CPU2 attaching NULL sched-domain.
[   28.228922] CPU3 attaching NULL sched-domain.
[   28.260153] CPU0 attaching sched-domain:
[   28.260160]  domain 0: span 0,2 level SIBLING
[   28.260166]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[   28.260178]   domain 1: span 0,2 level MC
[   28.260183]    groups: 0,2 (cpu_power = 1178)
[   28.260192]    domain 2: span 0-3 level CPU
[   28.260196]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   28.260211] CPU1 attaching sched-domain:
[   28.260216]  domain 0: span 1,3 level SIBLING
[   28.260220]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[   28.260231]   domain 1: span 1,3 level MC
[   28.260236]    groups: 1,3 (cpu_power = 1178)
[   28.260244]    domain 2: span 0-3 level CPU
[   28.260249]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   28.260263] CPU2 attaching sched-domain:
[   28.260267]  domain 0: span 0,2 level SIBLING
[   28.260272]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[   28.260283]   domain 1: span 0,2 level MC
[   28.260287]    groups: 0,2 (cpu_power = 1178)
[   28.260296]    domain 2: span 0-3 level CPU
[   28.260300]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   28.260314] CPU3 attaching sched-domain:
[   28.260318]  domain 0: span 1,3 level SIBLING
[   28.260323]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[   28.260334]   domain 1: span 1,3 level MC
[   28.260338]    groups: 1,3 (cpu_power = 1178)
[   28.260347]    domain 2: span 0-3 level CPU
[   28.260351]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   36.004520] CPU0 attaching NULL sched-domain.
[   36.004531] CPU1 attaching NULL sched-domain.
[   36.004537] CPU2 attaching NULL sched-domain.
[   36.004542] CPU3 attaching NULL sched-domain.
[   36.084158] CPU0 attaching sched-domain:
[   36.084166]  domain 0: span 0,2 level SIBLING
[   36.084171]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[   36.084183]   domain 1: span 0,2 level MC
[   36.084188]    groups: 0,2 (cpu_power = 1178)
[   36.084197]    domain 2: span 0-3 level CPU
[   36.084201]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   36.084216] CPU1 attaching sched-domain:
[   36.084221]  domain 0: span 1,3 level SIBLING
[   36.084225]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[   36.084236]   domain 1: span 1,3 level MC
[   36.084240]    groups: 1,3 (cpu_power = 1178)
[   36.084249]    domain 2: span 0-3 level CPU
[   36.084253]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   36.084267] CPU2 attaching sched-domain:
[   36.084271]  domain 0: span 0,2 level SIBLING
[   36.084276]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[   36.084287]   domain 1: span 0,2 level MC
[   36.084291]    groups: 0,2 (cpu_power = 1178)
[   36.084299]    domain 2: span 0-3 level CPU
[   36.084304]     groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   36.084317] CPU3 attaching sched-domain:
[   36.084322]  domain 0: span 1,3 level SIBLING
[   36.084326]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[   36.084337]   domain 1: span 1,3 level MC
[   36.084341]    groups: 1,3 (cpu_power = 1178)
[   36.084350]    domain 2: span 0-3 level CPU
[   36.084354]     groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)

# PCI device 0x14e4:0x4727 (wl)

lspci -n