Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2011-04-17 03:42:41

  Danio - Zbanowany

Danio
Zbanowany
Zarejestrowany: 2010-04-04

ati na starym radeonie r2xx

Jak uzyskac normalna wydajnosc dla kart Ati r2xx ? Podobno nie są wspierana przez zamkniete sterownki fglrx.

Kod:

glxinfo|grep -i -n opengl
24:OpenGL vendor string: Brian Paul
25:OpenGL renderer string: Mesa X11
26:OpenGL version string: 2.1 Mesa 7.7.1
27:OpenGL shading language version string: 1.20
28:OpenGL extensions:

tak wyglada rendering ati w przypadku otwartych sterow

Kod:

xserver-xorg-video-radeon xserver-xorg-video-radeonhd xserver-xorg-video-ati 
libgl1-mesa-dri libgl1-mesa-glx libglu1-mesa mesa-common-dev mesa-utils xlibmesa-glu x11-utils

Kod:

 glxgears
422 frames in 5.0 seconds = 84.379 FPS
418 frames in 5.0 seconds = 83.475 FPS

a tak wygladal dla starszej karty nvidi opartej o nv17

Kod:

5807 frames in 5.0 seconds = 1161.325 FPS
5832 frames in 5.0 seconds = 1166.250 FPS

Co mi zostaje . Upgradowac system do Wheeze aby zainstalowac mesa-experimetal -gallium? Co robić ?

Ostatnio edytowany przez Danio (2011-04-17 03:43:17)

I cóż że dymią krematoria ? toż w nich przetapia się historia...

Offline

 

#2  2011-04-17 10:42:38

  torrentow - Członek Sejmowej Komisji Śledczej

torrentow
Członek Sejmowej Komisji Śledczej
Skąd: z GNU
Zarejestrowany: 2009-11-23

Re: ati na starym radeonie r2xx

Poczytaj mana i napisz /etc/X11/xorg.conf

Ostatnio edytowany przez torrentow (2011-04-17 10:42:49)

Każdy sam sobie szkodzi :)
http://img715.imageshack.us/img715/7104/apt.png

Offline

 

#3  2011-04-17 13:31:16

  Danio - Zbanowany

Danio
Zbanowany
Zarejestrowany: 2010-04-04

Re: ati na starym radeonie r2xx

Kod:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "dri"
    Load  "extmod"
    Load  "dri2"
    Load  "record"
    Load  "glx"
    Load  "dbe"
Load "GLcore"

EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    #DisplaySize      320   240    # mm
    Identifier   "Monitor0"
    VendorName   "STN"
    ModelName    "S/T 77/76BDF"
    HorizSync    30.0 - 85.0
    VertRefresh  50.0 - 160.0
    Option        "DPMS"

EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "CustomEDID"             # [<str>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ClockGating"            # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
        #Option     "ForceLowPowerMode"      # [<bool>]
        #Option     "DynamicPM"              # [<bool>]
        #Option     "NewPLL"                 # [<bool>]
        #Option     "ZaphodHeads"            # <str>
    Identifier  "Card0"
    Driver      "ati"
    VendorName  "ATI Technologies Inc"
    BoardName   "RV280 [Radeon 9200]"
    BusID       "PCI:1:0:0"
#Option     "AGPFastWrite" "false"
#Option     "EnablePageFlip" "True"


EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "dri"
  Mode 0666
EndSection

Przeszedlem na Wheeze. Ale instalacja Galium sie nie udala wg tej instrukcjii

Kod:

$ git clone git://anongit.freedesktop.org/mesa/mesa mesa.git
$ cd mesa.git
$ autoreconf -vfi

Kod:

autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
configure.ac:108: error: Could not locate the pkg-config autoconf macros.
  These are usually located in /usr/share/aclocal/pkg.m4. If your macros
  are in a different location, try setting the environment variable
  ACLOCAL="aclocal -I/other/macro/dir" before running autoreconf.
configure.ac:108: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: /usr/bin/autom4te failed with exit status: 1
autoreconf: aclocal failed with exit status: 1
I cóż że dymią krematoria ? toż w nich przetapia się historia...

Offline

 

#4  2011-04-17 19:00:59

  SpeedVin - Fan Jogurtu

SpeedVin
Fan Jogurtu
Zarejestrowany: 2010-09-25
Serwis

Re: ati na starym radeonie r2xx

Zainstaluj pakiety pkg-config autoconf i xorg-macros ;)

Offline

 

#5  2011-04-17 19:24:51

  Danio - Zbanowany

Danio
Zbanowany
Zarejestrowany: 2010-04-04

Re: ati na starym radeonie r2xx

to jest koncowka kompilacjii w xtermie (chyba ma zmniejszoną pojemność)


Kod:

autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: tracing
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: not using Autoheader
autoreconf: configure.ac: not using Automake
autoreconf: Leaving directory `.

dalej

Kod:

./configure --enable-driglx-direct \
>               --enable-gallium \
>               --enable-gles-overlay \
>               --enable-gles1 \
>               --enable-gles2 \
>               --enable-glx-tls \
>               --with-driver=dri \
>               --with-dri-driverdir=/usr/lib/dri \
>               --with-egl-platforms='drm x11' \
>               --with-state-trackers=egl,glx,dri,vega \
>               …
configure: WARNING: you should use --build, --host, --target
configure: WARNING: invalid host type: …
checking build system type... Invalid configuration `…': machine `…' not recognized
configure: error: /bin/bash bin/config.sub … failed

a wiec trzeba bylo wybrac jedna opcję...

Kod:

./configure --with-dri-drivers=radeon --enable-gallium-radeon
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... ccache gcc -E
checking for gcc... (cached) ccache gcc
checking whether we are using the GNU C compiler... (cached) yes

ta była dla r300 - może zadziała

Ostatnio edytowany przez Danio (2011-04-17 19:31:42)

I cóż że dymią krematoria ? toż w nich przetapia się historia...

Offline

 

#6  2011-04-17 19:39:37

  Danio - Zbanowany

Danio
Zbanowany
Zarejestrowany: 2010-04-04

Re: ati na starym radeonie r2xx

make


Kod:

Please choose a configuration from the following list:
aix
aix-64
aix-64-static
aix-gcc
aix-static
beos
bluegene-osmesa
bluegene-xlc-osmesa
catamount-osmesa-pgi
config.mgw
darwin
darwin-fat-32bit
darwin-fat-all
freebsd
freebsd-dri
freebsd-dri-amd64
freebsd-dri-x86
hpux10
hpux10-gcc
hpux10-static
hpux11-32
hpux11-32-static
hpux11-32-static-nothreads
hpux11-64
hpux11-64-static
hpux11-ia64
hpux11-ia64-static
hpux9
hpux9-gcc
irix6-64
irix6-64-static
irix6-n32
irix6-n32-static
irix6-o32
irix6-o32-static
linux
linux-alpha
linux-alpha-static
linux-cell
linux-cell-debug
linux-debug
linux-dri
linux-dri-debug
linux-dri-ppc
linux-dri-x86
linux-dri-x86-64
linux-dri-xcb
linux-egl
linux-fbdev
linux-i965
linux-ia64-icc
linux-ia64-icc-static
linux-icc
linux-icc-static
linux-indirect
linux-llvm
linux-llvm-debug
linux-opengl-es
linux-osmesa
linux-osmesa16
linux-osmesa16-static
linux-osmesa32
linux-osmesa-static
linux-ppc
linux-ppc-static
linux-profile
linux-sparc
linux-sparc5
linux-static
linux-ultrasparc
linux-x86
linux-x86-32
linux-x86-64
linux-x86-64-debug
linux-x86-64-profile
linux-x86-64-static
linux-x86-debug
linux-x86-profile
linux-x86-static
netbsd
openbsd
osf1
osf1-static
solaris-x86
solaris-x86-gcc
solaris-x86-gcc-static
sunos4
sunos4-gcc
sunos4-static
sunos5
sunos5-64-gcc
sunos5-gcc
sunos5-smp
sunos5-v8
sunos5-v8-static
sunos5-v9
sunos5-v9-cc-g++
sunos5-v9-static
ultrix-gcc

Then type 'make <config>' (ex: 'make linux-x86')

Or, run './configure' then 'make'
See './configure --help' for details

(ignore the following error message)
make: *** [configs/current] Błąd 1

mv lib/gallium/* lib/

Kod:

mv: nie można wykonać stat na `lib/gallium/*': Nie ma takiego pliku ani katalogu

mkdir /lib/gallium/
mkdir /lib/gallium/lib
mv lib/gallium/* lib/
mv: nie można wykonać stat na `lib/gallium/*': Nie ma takiego pliku ani katalogu


zapomnialem powiedziec ,że wcześniej jedno z poleceń zostało pominięte

Kod:

apt-get build-dep mesa
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności       
Odczyt informacji o stanie... Gotowe
E: Należy dopisać jakieś URI pakietów źródłowych do pliku sources.list

Ostatnio edytowany przez Danio (2011-04-17 19:43:28)

I cóż że dymią krematoria ? toż w nich przetapia się historia...

Offline

 

#7  2011-04-18 07:10:01

  Danio - Zbanowany

Danio
Zbanowany
Zarejestrowany: 2010-04-04

Re: ati na starym radeonie r2xx

root@localhost:/home/mesa# autoreconf -vfi

Kod:

autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: tracing
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: not using Autoheader
autoreconf: configure.ac: not using Automake
autoreconf: Leaving directory `.'

root@localhost:/home/mesa# ./configure --with-dri-drivers=radeon --enable-gallium-radeon

Kod:

checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... ccache gcc -E
checking for gcc... (cached) ccache gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether ccache gcc accepts -g... (cached) yes
checking for ccache gcc option to accept ISO C89... (cached) none needed
checking whether we are using the GNU C++ compiler... no
checking whether ccache g++ accepts -g... yes
checking for gmake... no
checking for make... make
checking for python2... no
checking for python... python
checking for makedepend... /usr/bin/makedepend
checking for sed... /bin/sed
checking for a BSD-compatible install... /usr/bin/install -c
checking if compiling with clang... no
checking whether gcc version is sufficient... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether ccache gcc supports -fvisibility=hidden... yes
checking whether to enable assembly... yes, x86
checking for ccache gcc option to produce PIC... -fPIC
checking for dlopen... no
checking for dlopen in -ldl... yes
checking for posix_memalign... yes
checking pkg-config files for X11 are available... no
checking for X... no
configure: error: X11 development libraries needed for dri driver

apt-get install libX11-dev

Kod:

autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: tracing
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
configure.ac:15: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa
autoreconf: configure.ac: not using Autoheader
autoreconf: configure.ac: not using Automake
autoreconf: Leaving directory `.'

apt-get install x11proto-gl-dev

Kod:

Czytanie list pakietów... Gotowe
Budowanie drzewa zależności       
Odczyt informacji o stanie... Gotowe
Zostaną zainstalowane następujące NOWE pakiety:
  x11proto-gl-dev
0 aktualizowanych, 1 nowo instalowanych, 0 usuwanych i 1 nieaktualizowanych.
Konieczne pobranie 21,6 kB archiwów.
Po tej operacji zostanie dodatkowo użyte 172 kB miejsca na dysku.
Pob: 1 http://ftp.pl.debian.org/debian/ testing/main x11proto-gl-dev i386 1.4.12-1 [21,6 kB]
Pobrano 21,6 kB w 0s (65,7 kB/s)     
dpkg: ostrzeżenie: parsing file '/var/lib/dpkg/status' near line 9986 package 'linux-image-2.6.36':
 error in Version string 'custom.11.0': version number does not start with digit
dpkg: ostrzeżenie: parsing file '/var/lib/dpkg/status' near line 16698 package 'linux-headers-2.6.36':
 error in Version string 'custom.11.0': version number does not start with digit
dpkg: ostrzeżenie: parsing file '/var/lib/dpkg/available' near line 10933 package 'linux-image-2.6.36':
 error in Version string 'custom.11.0': version number does not start with digit
dpkg: ostrzeżenie: parsing file '/var/lib/dpkg/available' near line 18284 package 'linux-headers-2.6.36':
 error in Version string 'custom.11.0': version number does not start with digit
Zaznaczenie poprzednio niezaznaczonego pakietu x11proto-gl-dev.
(Odczytywanie bazy danych ... 78927 files and directories currently installed.)
Rozpakowanie x11proto-gl-dev (z .../x11proto-gl-dev_1.4.12-1_i386.deb) ...
dpkg: ostrzeżenie: parsing file '/var/lib/dpkg/status' near line 10007 package 'linux-image-2.6.36':
 error in Version string 'custom.11.0': version number does not start with digit
dpkg: ostrzeżenie: parsing file '/var/lib/dpkg/status' near line 16719 package 'linux-headers-2.6.36':
 error in Version string 'custom.11.0': version number does not start with digit
Konfigurowanie x11proto-gl-dev (1.4.12-1) ...
localepurge: Disk space freed in /usr/share/locale: 0 KiB
localepurge: Disk space freed in /usr/share/man: 0 KiB
localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB
localepurge: Disk space freed in /usr/share/omf: 0 KiB

Total disk space freed by localepurge: 0 KiB

wymagane były pakiety z Sida

Kod:

 libdrm-dev zależy od libdrm2 (= 2.4.24-2); jednakże:
  Wersją libdrm2 w systemie jest 2.4.23-3.
 libdrm-dev zależy od libdrm-intel1 (= 2.4.24-2); jednakże:
  Wersją libdrm-intel1 w systemie jest 2.4.23-3.
 libdrm-dev zależy od libdrm-radeon1 (= 2.4.24-2); jednakże:
  Wersją libdrm-radeon1 w systemie jest 2.4.23-3.
 libdrm-dev zależy od libdrm-nouveau1a (= 2.4.24-2); jednakże:
  Wersją libdrm-nouveau1a w systemie jest 2.4.23-3.
 libdrm-dev zależy od libkms1 (= 2.4.24-2); jednakże:

root@localhost:/home/mesa# ./configure --with-dri-drivers=radeon --enable-gallium-radeon

Kod:

checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... ccache gcc -E
checking for gcc... (cached) ccache gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether ccache gcc accepts -g... (cached) yes
checking for ccache gcc option to accept ISO C89... (cached) none needed
checking whether we are using the GNU C++ compiler... no
checking whether ccache g++ accepts -g... yes
checking for gmake... no
checking for make... make
checking for python2... no
checking for python... python
checking for makedepend... /usr/bin/makedepend
checking for sed... /bin/sed
checking for a BSD-compatible install... /usr/bin/install -c
checking if compiling with clang... no
checking whether gcc version is sufficient... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether ccache gcc supports -fvisibility=hidden... yes
checking whether to enable assembly... yes, x86
checking for ccache gcc option to produce PIC... -fPIC
checking for dlopen... no
checking for dlopen in -ldl... yes
checking for posix_memalign... yes
checking pkg-config files for X11 are available... yes
checking for X11... yes
checking for GLPROTO... yes
checking for LIBDRM... yes
checking for DRI2PROTO... yes
checking for XF86VIDMODE... no
checking for DRIGL... no
configure: error: Package requirements (x11 xext xdamage xfixes) were not met:

No package 'xext' found
No package 'xdamage' found
No package 'xfixes' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables DRIGL_CFLAGS
and DRIGL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

apt-get install...

root@localhost:/home/mesa# ./configure --with-dri-drivers=radeon --enable-gallium-radeon

Kod:

checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... ccache gcc -E
checking for gcc... (cached) ccache gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether ccache gcc accepts -g... (cached) yes
checking for ccache gcc option to accept ISO C89... (cached) none needed
checking whether we are using the GNU C++ compiler... no
checking whether ccache g++ accepts -g... yes
checking for gmake... no
checking for make... make
checking for python2... no
checking for python... python
checking for makedepend... /usr/bin/makedepend
checking for sed... /bin/sed
checking for a BSD-compatible install... /usr/bin/install -c
checking if compiling with clang... no
checking whether gcc version is sufficient... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether ccache gcc supports -fvisibility=hidden... yes
checking whether to enable assembly... yes, x86
checking for ccache gcc option to produce PIC... -fPIC
checking for dlopen... no
checking for dlopen in -ldl... yes
checking for posix_memalign... yes
checking pkg-config files for X11 are available... yes
checking for X11... yes
checking for GLPROTO... yes
checking for LIBDRM... yes
checking for DRI2PROTO... yes
checking for XF86VIDMODE... no
checking for DRIGL... yes
checking for LIBDRM_RADEON... yes
checking expat.h usability... no
checking expat.h presence... no
checking for expat.h... no
configure: error: Expat required for DRI.

Ostatnio edytowany przez Danio (2011-04-18 09:29:40)

I cóż że dymią krematoria ? toż w nich przetapia się historia...

Offline

 

#8  2011-04-18 12:33:28

  Danio - Zbanowany

Danio
Zbanowany
Zarejestrowany: 2010-04-04

Re: ati na starym radeonie r2xx

Zainstalowałem wszystkie zależności ,w tym pochodzące z Sida

po wykonaniu make kompilacja trwała jakąś godzinę

korzystalem z opisu na tej stronie

http://pkg-xorg.alioth.debian.org/howto/build-mesa.html

Ale nie udalo się. Nie ma nigdzie normalnego opisu ,artykulu w jezyku polskim . Jakby wsparcie 3d dla starszych kart ati nie bylo problemem. Nie wiem czy ten sterownik dziala. Ale jesli dziala to chyba sam napisze napisze poradnik bo sie wkurwilem

Ostatnio edytowany przez Danio (2011-04-18 13:51:58)

I cóż że dymią krematoria ? toż w nich przetapia się historia...

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)