Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2011-01-24 13:12:43
mqluke - 
Użytkownik
Odczyt SMART
Witam wszystkich
Ost na mojej maszynie przy probie kopiowania zaczely sie pojawiac dziwne bledy nt dysku w konsoli. nie moglem znalesc logow nigdzie. objawialo sie tym ze system kompletnie sie odcinal. pojawialy sie tylko bledy nt SDA
postanowilem zainstalowac ten bardzo przydatny program smartmontools i oto co dostalem
Kod:
Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 36777682 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 81 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2042 7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always - 25960176661 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19771 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 108 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Unknown_Attribute 0x0032 100 094 000 Old_age Always - 333 189 High_Fly_Writes 0x003a 076 076 000 Old_age Always - 24 190 Airflow_Temperature_Cel 0x0022 063 056 045 Old_age Always - 37 (Lifetime Min/Max 37/37) 194 Temperature_Celsius 0x0022 037 044 000 Old_age Always - 37 (0 15 0 0) 195 Hardware_ECC_Recovered 0x001a 037 030 000 Old_age Always - 36777682 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 5 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
ponizej wiecej info: to dysk Seagare 500GB
Kod:
Device Model: ST3500320NS Serial Number: 5QM1BLLE Firmware Version: SN04 User Capacity: 500,107,862,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Sun Jan 23 11:57:54 2011 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled
a tu reszta raporu:
Kod:
SMART Error Log Version: 1
ATA Error Count: 33 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 33 occurred at disk power-on lifetime: 19723 hours (821 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec ff 04 9d 00 32 a0 00 08:50:39.970 IDENTIFY DEVICE
a1 ff 01 01 00 00 a0 00 08:50:39.568 IDENTIFY PACKET DEVICE
00 00 00 00 00 00 00 04 08:50:34.946 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:31.851 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:31.731 NOP [Abort queued commands]
Error 32 occurred at disk power-on lifetime: 19723 hours (821 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 ff 01 01 00 00 a0 00 08:50:39.568 IDENTIFY PACKET DEVICE
00 00 00 00 00 00 00 04 08:50:34.946 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:31.851 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:31.731 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:30.939 NOP [Abort queued commands]
Error 31 occurred at disk power-on lifetime: 19723 hours (821 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec ff 04 9d 00 32 a0 00 08:50:25.258 IDENTIFY DEVICE
a1 ff 01 01 00 00 a0 00 08:50:24.855 IDENTIFY PACKET DEVICE
00 00 00 00 00 00 00 04 08:50:16.182 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:13.088 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:12.968 NOP [Abort queued commands]
Error 30 occurred at disk power-on lifetime: 19723 hours (821 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 ff 01 01 00 00 a0 00 08:50:24.855 IDENTIFY PACKET DEVICE
00 00 00 00 00 00 00 04 08:50:16.182 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:13.088 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:12.968 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 08:50:12.176 NOP [Abort queued commands]
Error 29 occurred at disk power-on lifetime: 19723 hours (821 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 02 08:46:27.298 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 02 08:46:27.290 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 08:46:27.134 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 02 08:46:22.106 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 02 08:46:22.098 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.teraz moje pytanie jest czy ktos potrafi stwierdzic: do wymiany albo jest ok
bo mi sie wydaje ze ja tu widze bardzo niedobre odczyty :(((
prosze o pomoc bo musze szybko decyzje podjac czy kupowac nowe dyski
dzieki!!
Ostatnio edytowany przez mqluke (2011-01-24 13:13:29)
Offline
#2 2011-01-24 13:44:19
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Odczyt SMART
ST3500320NS to jest czarna seria, wystarczy poczytać opinie, musisz jak najszybciej uaktualnić firmware do nowszej wersji, zanim dysk przestanie w ogóle widzieć w biosie, ale to i tak teraz raczej nic nie pomoże, konieczna będzie wymiana.
Windows 8.1
Offline