Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2010-10-30 17:31:10

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

mpd Address already in use

Yo

Wiec tak w squeeze nie chce mi działać mpd juz podczas pierwszej instalacji wywalał error w synapticu podczas konfiguracji.

Czesc problemów udało mi się rowiązań lecz teraz mam coś takiego przy próbie stworzenia bazy i nawet po wpisaniu samego mpd ( dodam iż zmieniłem port 6001 a wcześniej było 6000)

Kod:

mpd --create-db
listen: Failed to listen on *:6601: Address already in use
Przerwane

Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#2  2010-10-30 18:19:17

  SpeedVin - Fan Jogurtu

SpeedVin
Fan Jogurtu
Zarejestrowany: 2010-09-25
Serwis

Re: mpd Address already in use

xomrk napisał(-a):

Yo

Wiec tak w squeeze nie chce mi działać mpd juz podczas pierwszej instalacji wywalał error w synapticu podczas konfiguracji.

Czesc problemów udało mi się rowiązań lecz teraz mam coś takiego przy próbie stworzenia bazy i nawet po wpisaniu samego mpd ( dodam iż zmieniłem port 6001 a wcześniej było 6000)

Kod:

mpd --create-db
listen: Failed to listen on *:6601: Address already in use
Przerwane

Coś używa portu numer 6601, na 6600 działa?

Offline

 

#3  2010-10-30 18:37:45

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Na tym i na tym nie działa


Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#4  2010-10-30 18:43:01

  SpeedVin - Fan Jogurtu

SpeedVin
Fan Jogurtu
Zarejestrowany: 2010-09-25
Serwis

Re: mpd Address already in use

xomrk napisał(-a):

Na tym i na tym nie działa

Na 6600 działa, a na 6601 nie?

Offline

 

#5  2010-10-30 21:26:40

  sal_i - Członek DUG

sal_i
Członek DUG
Skąd: Neverhood
Zarejestrowany: 2007-01-01

Re: mpd Address already in use

jeśli dobrze pamiętam to musisz ubić mpd przed aktualizacją bazy


“Generowanie liczb losowych jest zbyt ważne, żeby zostawiać to przypadkowi”

Offline

 

#6  2010-10-30 21:34:20

  urug - Członek DUG

urug
Członek DUG
Skąd: Częstochowa
Zarejestrowany: 2008-04-22
Serwis

Re: mpd Address already in use

Był już taki problem poruszany. Poszukaj.


Pozdrawiam, Tomek

Offline

 

#7  2010-10-30 22:05:14

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Na 6600 działa, a na 6601 nie?

Jak by działał to bym nie pisał.

Ubiłem ch* i chciałem stworzyc baze lecz po wykonaniu komendy nic się nie działo ( na lennym wypisywało wszystkie pliki mp3 p.s utworzylem dowiazanie do bibloteki mp3 ) . No i nadal mam

Kod:

listen: Failed to listen on localhost (line 69): Address already in use
Przerwane

Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#8  2010-10-30 22:26:39

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: mpd Address already in use

Wklej wyniki:

Kod:

cat /etc/mpd.conf
mpd --kill --verbose --no-daemon --stdout

Offline

 

#9  2010-10-31 08:44:57

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Kod:

# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.


# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This 
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory        "/var/lib/mpd/music/"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use 
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory        "/var/lib/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the 
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file            "/var/lib/mpd/tag_cache"
# 
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file            "/var/log/mpd/mpd.log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file            "/var/run/mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server 
# state will be reset on server start up.
#
state_file            "/var/lib/mpd/state"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
user                "mpd"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
bind_to_address        "localhost"
#
# And for Unix Socket
#bind_to_address        "/var/run/mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port                "6600"
#
# This setting controls the type of information which is logged. Available 
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level            "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that 
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback            "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists    "no"
#
# This setting defines a list of tag types that will be extracted during the 
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use    "artist,album,title,track,name,genre,date,composer,performer,disc"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following 
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks    "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks        "yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled        "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name            "Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in. 
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple 
# audio outputs at the same time, through multiple audio_output settings 
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of 
# other audio outputs.
#
# An example of an ALSA output:
#
audio_output {
    type        "alsa"
    name        "My ALSA Device"
    device        "hw:0,0"    # optional
    format        "44100:16:2"    # optional
    mixer_device    "default"    # optional
    mixer_control    "PCM"        # optional
    mixer_index    "0"        # optional
}
#
# An example of an OSS output:
#
#audio_output {
#    type        "oss"
#    name        "My OSS Device"
#    device        "/dev/dsp"    # optional
#    format        "44100:16:2"    # optional
#    mixer_device    "/dev/mixer"    # optional
#    mixer_control    "PCM"        # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#    type        "shout"
#    encoding    "ogg"            # optional
#    name        "My Shout Stream"
#    host        "localhost"
#    port        "8000"
#    mount        "/mpd.ogg"
#    password    "hackme"
#    quality        "5.0"
#    bitrate        "128"
#    format        "44100:16:1"
#    protocol    "icecast2"        # optional
#    user        "source"        # optional
#    description    "My Stream Description"    # optional
#    genre        "jazz"            # optional
#    public        "no"            # optional
#    timeout        "2"            # optional
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#    type        "httpd"
#    name        "My HTTP Stream"
#    encoder        "vorbis"        # optional, vorbis or lame
#    port        "8000"
#    quality        "5.0"            # do not define if bitrate is defined
#    bitrate        "128"            # do not define if quality is defined
#    format        "44100:16:1"
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
#    type        "pulse"
#    name        "My Pulse Output"
#    server        "remote_server"        # optional
#    sink        "remote_server_sink"    # optional
#}
#
## Example "pipe" output:
#
#audio_output {
#    type        "pipe"
#    name        "my pipe"
#    command        "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#    command        "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#    command        "nc example.org 8765"
#    format        "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#    type        "null"
#    name        "My Null Output"
#}
#
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#
#audio_output_format        "44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this setting specifies 
# the sample rate converter to use.  Possible values can be found in the 
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter        "Fastest Sinc Interpolator"
#
###############################################################################


# Volume control mixer ########################################################
#
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to 
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
#
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#
#mixer_type            "hardware"
#
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#
#mixer_type            "software"
#
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#
#mixer_type            "disabled"
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#
#replaygain            "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp        "0"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has 
# equal "loudness". This setting is disabled by default.
#
#volume_normalization        "no"
#
###############################################################################


# MPD Internal Buffering ######################################################
#
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#
#audio_buffer_size        "2048"
#
# This setting controls the percentage of the buffer which is filled before 
# beginning to play. Increasing this reduces the chance of audio file skipping, 
# at the cost of increased time prior to audio playback.
#
#buffer_before_play        "10%"
#
###############################################################################


# Resource Limitations ########################################################
#
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#
#connection_timeout        "60"
#max_connections        "10"
#max_playlist_length        "16384"
#max_command_list_size        "2048"
#max_output_buffer_size        "8192"
#
###############################################################################


# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you 
# may need to modify this setting. After modification of this setting mpd 
# --create-db must be run to change the database.
#
filesystem_charset        "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
id3v1_encoding            "UTF-8"
#
###############################################################################

Kod:

mpd --kill --verbose --no-daemon --stdout
config: loading file /etc/mpd.conf

Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#10  2010-10-31 11:06:11

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: mpd Address already in use

xomrk napisał(-a):

Kod:

music_directory        "/var/lib/mpd/music/"

Akurat powyższe nie jest związane z Twoim problemem, ale masz w /var/lib/mpd/music jakiekolwiek pliki muzyczne?

Widzę że używasz localhost jako nazwy hosta. Masz w /etc/hosts linijkę

Kod:

127.0.0.1   localhost

(ona powinna być tam domyślnie, ale może jej nie być z jakiegoś powodu)

xomrk napisał(-a):

Kod:

mpd --kill --verbose --no-daemon --stdout
config: loading file /etc/mpd.conf

Nie widzę tego błędu o którym wspominałeś. Właściwie nie ma żadnego błędu. Co pokazuje:

Kod:

mpd --kill --verbose --no-daemon --stdout --create-db

?

Plik /var/lib/mpd/tag_cache jest pusty? A po powyższym pleceniu (z --create-db)?

Offline

 

#11  2010-10-31 13:01:19

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Kod:

cat /var/lib/mpd/tag_cache
info_begin
mpd_version: 0.15.12
fs_charset: UTF-8
info_end
songList begin
songList end
root@tux:# mpd --kill --verbose --no-daemon --stdout --create-db
config: loading file /etc/mpd.conf
root@tux:# cat /var/lib/mpd/tag_cache
info_begin
mpd_version: 0.15.12
fs_charset: UTF-8
info_end
songList begin
songList end

Ostatnio edytowany przez xomrk (2010-10-31 13:01:31)


Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#12  2010-10-31 16:37:24

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: mpd Address already in use

Chyba ta wersja do odemonizowania nie działa tak jak się spodziewałem.
Ubij mpd (może być mpd --kill — przy braku działającej instancji wyświetli komunikat o niemożności otworzenia pliku pid) a potem:

Kod:

mpd --verbose --stdout --create-db

(sprawdzane, działa)

Sprawdź też

Kod:

netstat -lnptu

czy żadne cholerstwo Ci nie zajmuje portu na localhoście.

Na wszelki wypadek: te polecenia wykonujesz jako root, prawda?

Offline

 

#13  2010-10-31 16:55:39

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Kod:

tcp        0      0 127.0.0.1:6600          0.0.0.0:*               LISTEN      1195/mpd        
tcp        0      0 0.0.0.0:1550            0.0.0.0:*               LISTEN      2086/kadu       
tcp6       0      0 ::1:6600                :::*                    LISTEN      1195/mpd        
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1252/avahi-daemon: 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           1303/dhclient   
udp        0      0 0.0.0.0:40539           0.0.0.0:*                           1252/avahi-daemon: 
udp6       0      0 :::5353                 :::*                                1252/avahi-daemon: 
udp6       0      0 :::41977                :::*                                1252/avahi-daemon:

Jako root.

Niby coś ruszyło ale po właczeniu sonaty w konsoli dostałem

Kod:

client: [0] process command "status"
client: [0] command returned 0
client: [0] process command "status"
client: [0] command returned 0
client: [0] process command "currentsong"
client: [0] command returned 0
client: [0] process command "status"
client: [0] command returned 0
client: [0] process command "currentsong"
client: [0] command returned 0

Pozatym nic nie ma w bilotece.

P.S
Jest już zgłoszony jakis bug odnośnie tego mpd ?


Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#14  2010-10-31 17:25:47

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: mpd Address already in use

Ubij to MPD o Pidzie 1195 i uruchom

Kod:

mpd --verbose --stdout --create-db

Wklej CAŁY wynik.

Offline

 

#15  2010-10-31 18:47:25

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

DObra wyglada to tak

Kod:

root@tux:~# database: removing empty directories from DB
database: sorting DB
database: writing DB

I cały czas stoi wystarczy ze wcisne enter to przeskakuje do nowej lini tak jakby aplikacja zakonczyła żywot zeby było śmiesznie dysk nie daje życia ze coś jest przeszukiwane.


Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#16  2010-10-31 19:18:38

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: mpd Address already in use

Dam głowę że ls /var/lib/mpd/music/ nic nie zwróci.

Twoja baza jest pusta.

Wspominałeś coś o dowiązaniu symbolicznym — czy plik /var/lib/mpd/music jest dowiązaniem do katalogu w którym przechowujesz muzykę? Jeśli tak, w mpd.conf odkomentuj linijkę:

Kod:

#follow_outside_symlinks    "yes"

Chociaż prościej by było po prostu wpisać odpowiednią ścieżkę w linijce music_directory.

Zrestartuj MPD i powinien bez problemów utworzyć bazę danych.

Offline

 

#17  2010-10-31 19:50:28

  sal_i - Członek DUG

sal_i
Członek DUG
Skąd: Neverhood
Zarejestrowany: 2007-01-01

Re: mpd Address already in use

upewnij się że uprawnienia do plików z muzyką są wystarczające dla mpd


“Generowanie liczb losowych jest zbyt ważne, żeby zostawiać to przypadkowi”

Offline

 

#18  2010-10-31 20:39:48

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: mpd Address already in use

A nie możesz sprawdzić - co wisi na porcie 6600 i 6601?

Kod:

su root
lsof -i :6600
lsof -i :6601

i będzie wszystko jasne.


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#19  2010-10-31 20:42:42

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Poznań, Polska
Zarejestrowany: 2007-12-22
Serwis

Re: mpd Address already in use

sal_i napisał(-a):

upewnij się że uprawnienia do plików z muzyką są wystarczające dla mpd

Gdyby chodziło o uprawnienia, miałby takie komunikaty:

Kod:

update: Failed to open directory /tmp/cos-tam: Permission denied
input_file: Failed to open "/tmp/plik.mp3": Permission denied
mad: Failed to get total song time from: /tmp/plik.mp3
input_file: Failed to open "/tmp/plik.mp3": Permission denied
ffmpeg: failed to open /tmp/plik.mp3

Chyba że nie wkleił całego komunikatu MPD, o co go wyraźnie prosiłem.

Offline

 

#20  2010-12-28 13:25:42

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Witam

od samego początu w squeeze skopany jest mpd cały czas dostaje listen: Failed to listen on localhost (line 69): Address already in use
i nie mogę zbudować bazy mp3. Postanowiłem sobie dać siana lecz tylko mpd + sonata mi odpowiada z wszystkich programów.

Kod:

# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.


# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This 
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory        "/var/lib/mpd/music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use 
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory        "/var/lib/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the 
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file            "/var/lib/mpd/tag_cache"
# 
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file            "/var/log/mpd/mpd.log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file            "/var/run/mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server 
# state will be reset on server start up.
#
state_file            "/var/lib/mpd/state"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
user                "mpd"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
bind_to_address        "localhost"
#
# And for Unix Socket
#bind_to_address        "/var/run/mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port                "6600"
#
# This setting controls the type of information which is logged. Available 
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level            "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that 
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback            "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists    "no"
#
# This setting defines a list of tag types that will be extracted during the 
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use    "artist,album,title,track,name,genre,date,composer,performer,disc"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following 
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks    "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks        "yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled        "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name            "Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in. 
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple 
# audio outputs at the same time, through multiple audio_output settings 
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of 
# other audio outputs.
#
# An example of an ALSA output:
#
audio_output {
    type        "alsa"
    name        "My ALSA Device"
    device        "hw:0,0"    # optional
    format        "44100:16:2"    # optional
    mixer_device    "default"    # optional
    mixer_control    "PCM"        # optional
    mixer_index    "0"        # optional
}
#
# An example of an OSS output:
#
#audio_output {
#    type        "oss"
#    name        "My OSS Device"
#    device        "/dev/dsp"    # optional
#    format        "44100:16:2"    # optional
#    mixer_device    "/dev/mixer"    # optional
#    mixer_control    "PCM"        # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#    type        "shout"
#    encoding    "ogg"            # optional
#    name        "My Shout Stream"
#    host        "localhost"
#    port        "8000"
#    mount        "/mpd.ogg"
#    password    "hackme"
#    quality        "5.0"
#    bitrate        "128"
#    format        "44100:16:1"
#    protocol    "icecast2"        # optional
#    user        "source"        # optional
#    description    "My Stream Description"    # optional
#    genre        "jazz"            # optional
#    public        "no"            # optional
#    timeout        "2"            # optional
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#    type        "httpd"
#    name        "My HTTP Stream"
#    encoder        "vorbis"        # optional, vorbis or lame
#    port        "8000"
#    quality        "5.0"            # do not define if bitrate is defined
#    bitrate        "128"            # do not define if quality is defined
#    format        "44100:16:1"
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
#    type        "pulse"
#    name        "My Pulse Output"
#    server        "remote_server"        # optional
#    sink        "remote_server_sink"    # optional
#}
#
## Example "pipe" output:
#
#audio_output {
#    type        "pipe"
#    name        "my pipe"
#    command        "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#    command        "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#    command        "nc example.org 8765"
#    format        "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#    type        "null"
#    name        "My Null Output"
#}
#
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#
#audio_output_format        "44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this setting specifies 
# the sample rate converter to use.  Possible values can be found in the 
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter        "Fastest Sinc Interpolator"
#
###############################################################################


# Volume control mixer ########################################################
#
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to 
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
#
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#
#mixer_type            "hardware"
#
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#
#mixer_type            "software"
#
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#
#mixer_type            "disabled"
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#
#replaygain            "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp        "0"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has 
# equal "loudness". This setting is disabled by default.
#
#volume_normalization        "no"
#
###############################################################################


# MPD Internal Buffering ######################################################
#
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#
#audio_buffer_size        "2048"
#
# This setting controls the percentage of the buffer which is filled before 
# beginning to play. Increasing this reduces the chance of audio file skipping, 
# at the cost of increased time prior to audio playback.
#
#buffer_before_play        "10%"
#
###############################################################################


# Resource Limitations ########################################################
#
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#
#connection_timeout        "60"
#max_connections        "10"
#max_playlist_length        "16384"
#max_command_list_size        "2048"
#max_output_buffer_size        "8192"
#
###############################################################################


# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you 
# may need to modify this setting. After modification of this setting mpd 
# --create-db must be run to change the database.
#
filesystem_charset        "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
id3v1_encoding            "UTF-8"
#
###############################################################################

Kod:

 mpd --create-db
listen: Failed to listen on localhost (line 69): Address already in use
Przerwane

Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#21  2010-12-28 13:34:46

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: mpd Address already in use

sprawdź czy coś Ci już nie śmiga na tym porcie i ewentualnie zmień go w konfigu ;)

Kod:

netstat -n --inet

LRU: #472938
napisz do mnie: ola@mojmail.eu
Hołmpejdż | Galerie | "Twórczość" || Free Image Hosting

Offline

 

#22  2010-12-28 13:36:11

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Nic

Kod:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
tcp        1      0 10.20.34.73:36398       217.96.37.17:80         CLOSE_WAIT 
tcp        0      0 10.20.34.73:34214       85.17.121.160:80        CLOSE_WAIT 
tcp        0      0 10.20.34.73:59835       83.31.38.132:14175      ESTABLISHED
tcp    58001      0 10.20.34.73:50597       188.165.20.29:5950      ESTABLISHED
tcp        1      0 10.20.34.73:36395       217.96.37.17:80         CLOSE_WAIT 
tcp        0      0 10.20.34.73:43257       85.17.121.160:1337      CLOSE_WAIT 
tcp        0      0 10.20.34.73:38788       94.23.238.48:80         ESTABLISHED
tcp        1      0 10.20.34.73:36396       217.96.37.17:80         CLOSE_WAIT 
tcp        0      0 10.20.34.73:44723       95.211.88.54:80         CLOSE_WAIT 
tcp        0      0 10.20.34.73:42071       192.121.121.30:80       CLOSE_WAIT 
tcp        0      0 10.20.34.73:52445       77.254.187.145:47560    ESTABLISHED
tcp        1      0 10.20.34.73:51384       217.96.37.18:80         CLOSE_WAIT 
tcp        1      0 10.20.34.73:36397       217.96.37.17:80         CLOSE_WAIT 
tcp        0  25267 10.20.34.73:60078       83.68.73.30:27755       ESTABLISHED
tcp        0      0 10.20.34.73:44413       209.85.146.113:80       ESTABLISHED
tcp        0      0 10.20.34.73:56686       95.211.88.49:80         CLOSE_WAIT 
tcp        0      0 10.20.34.73:47737       95.211.88.51:80         CLOSE_WAIT 
tcp        0      0 10.20.34.73:53521       70.38.112.37:80         TIME_WAIT  
udp        0      0 10.20.34.73:46102       10.20.32.1:5351         ESTABLISHED

Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

#23  2010-12-28 13:47:36

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: mpd Address already in use

odkomentuj port, wrzuć tryb gadatliwy dla logów, zrestartuj daemona mpd i sprawdź co na to tworzenie bazy i jak się wykrzaczy zobacz co jest w logach.


LRU: #472938
napisz do mnie: ola@mojmail.eu
Hołmpejdż | Galerie | "Twórczość" || Free Image Hosting

Offline

 

#24  2010-12-28 14:00:50

  sal_i - Członek DUG

sal_i
Członek DUG
Skąd: Neverhood
Zarejestrowany: 2007-01-01

Re: mpd Address already in use

a zatrzymałeś demona (ale to brzmi) zanim zaczołeś budować bazę danych?


“Generowanie liczb losowych jest zbyt ważne, żeby zostawiać to przypadkowi”

Offline

 

#25  2010-12-28 14:06:40

  xomrk - Członek DUG

xomrk
Członek DUG
Zarejestrowany: 2010-03-21

Re: mpd Address already in use

Mam coś takiego

Kod:

failed to stat music directory "/home/user/mp3": Permission denied

I za chiny ludowe nie mogę zmienić ustawień dostępu do katalogu mp3 ani w nautilusie ani w konsoli przez chmod na tryie admina i swoim.


Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)