Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#26 2010-10-27 21:12:03
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Wycinek z syslog
Kod:
Oct 27 15:34:37 debian acpid: Deprecated /proc/acpi/event was not found. Trying netlink and the input layer... Oct 27 15:34:37 debian acpid: starting up with netlink and the input layer Oct 27 15:34:37 debian acpid: skipping conf file /etc/acpi/events/. Oct 27 15:34:37 debian acpid: skipping conf file /etc/acpi/events/.. Oct 27 15:34:37 debian acpid: 1 rule loaded Oct 27 15:34:37 debian acpid: waiting for events: event logging is off Oct 27 15:34:37 debian /usr/sbin/cron[1422]: (CRON) INFO (pidfile fd = 3) Oct 27 15:34:37 debian /usr/sbin/cron[1429]: (CRON) STARTUP (fork ok) Oct 27 15:34:37 debian /usr/sbin/cron[1429]: (CRON) INFO (Running @reboot jobs) Oct 27 15:35:02 debian kernel: [ 33.652395] ISO 9660 Extensions: Microsoft Joliet Level 3 Oct 27 15:35:02 debian kernel: [ 33.720251] ISO 9660 Extensions: RRIP_1991A Oct 27 15:35:08 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:35:08 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:36:39 debian kernel: [ 130.030089] ISO 9660 Extensions: Microsoft Joliet Level 3 Oct 27 15:36:39 debian kernel: [ 130.098005] ISO 9660 Extensions: RRIP_1991A Oct 27 15:39:28 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:39:28 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:05 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:05 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:05 debian udevd[444]: specified user 'usbmux' unknown Oct 27 15:40:06 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:06 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:06 debian udevd[444]: specified user 'usbmux' unknown Oct 27 15:40:06 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:06 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:40:06 debian udevd[444]: specified user 'usbmux' unknown Oct 27 15:41:55 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:41:55 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:41:55 debian udevd[444]: specified user 'usbmux' unknown Oct 27 15:41:58 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:41:58 debian udevd[444]: GOTO 'acl_end' has no matching label in: '/lib/udev/rules.d/70-acl.rules' Oct 27 15:41:58 debian udevd[444]: specified user 'usbmux' unknown Oct 27 15:42:13 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:14 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:25 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:26 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:26 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:28 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:29 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:29 debian dbus-daemon: [system] Reloaded configuration Oct 27 15:42:55 debian shutdown[14327]: shutting down for system reboot
#27 2010-10-27 21:13:15
ArnVaker - 
Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: Kompilcja kernela pod własny sprzęt
zuzaxxx napisał(-a):
Tak ma być?
Chodzi mi o to GOTO bla bla bla
To idiotyczny bug w udevie... w pliku /lib/udev/rules.d/70-acl.rules brakuje zamykającego " na samym końcu ;)
Dopisz sobie albo udeva zaktualizuj, bo chyba już to poprawili.
Offline
#28 2010-10-27 21:18:53
rychu - elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk/kalmar
- Zarejestrowany: 2004-12-28
Re: Kompilcja kernela pod własny sprzęt
a w ogóle to jak robicie, po debianowemu czy make bzImage? ciekaw jestem czy poprawili buga z pobieraniem numeru wersji przy tworzeniu paczki
linux regd. user #248790
Offline
#29 2010-10-27 21:18:56
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Nie miałam zainstalowanego udev
Wydałam polecenie apt-get instal udev i zainstalowało libudev i udev
Komunikaty znikły :)
Pozostał tylko problem z usb poza EDIMAX nic nie wykrywa
sorki NIC :)
Kod:
make-kpkg linux-image linux-headers --initrd
sorki za posta pod postem...
// nie sorkuj tylko edytuj :P — ArnVaker
#30 2010-10-27 21:22:27
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: Kompilcja kernela pod własny sprzęt
moduły usb zobaczysz w wyniku
Kod:
lsusb -tv
-trochę nieczytelne, ale nazwy modułów się zgadzają.
Ostatnio edytowany przez Jacekalex (2010-10-27 21:22:45)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#31 2010-10-27 21:24:50
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Kod:
2-1:1.0: No such file or directory
5-1:1.0: No such file or directory
5-1:1.1: No such file or directory
5-1:1.2: No such file or directory
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
|__ Port 1: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 0, Class=HID, Driver=usbhid, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 3, If 0, Class=vend., Driver=, 12M
|__ Port 1: Dev 3, If 1, Class=vend., Driver=, 12M
|__ Port 1: Dev 3, If 2, Class=vend., Driver=, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|__ Port 1: Dev 2, If 0, Class=stor., Driver=, 480M
|__ Port 2: Dev 3, If 0, Class=vend., Driver=rt73usb, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
zuza@debian:~$Option USB High Speed Mobile Devices (USB_HSO)
Znalazłam chyba
Zaznaczyć jako moduł?
USB Mass Storage support (USB_STORAGE) To też nie jest zaznaczone a na babski rozum chyba powinno Zaznaczyć?
#32 2010-10-27 21:33:16
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Kompilcja kernela pod własny sprzęt
zaznacz i może jeszcze usb monitor,
przeoczyłem
Ostatnio edytowany przez raven18 (2010-10-27 21:34:43)
Windows 8.1
Offline
#33 2010-10-27 21:38:00
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
A w zakładce USB mass storage suport coś jeszcze?
Teraz kompilacja trwała mniej jak minute :0
Ostatnio edytowany przez zuzaxxx (2010-10-27 21:40:43)
#34 2010-10-27 21:44:36
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Kompilcja kernela pod własny sprzęt
nie, samo USB mass storage powinno wystarczyć
Windows 8.1
Offline
#35 2010-10-27 21:45:52
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Działa modem :)
Działa pendrive :)
Działa dysk zewnętrzny :)
Wszystko to z czego kożystam DZIAŁA :)
Podczas podnoszenia systemu żadnych komunikatów mogących zwrócić moją uwage nie zauważyłam :)
raven18 jesteś wielki :*
Ostatnio edytowany przez zuzaxxx (2010-10-27 21:46:25)
#36 2010-10-27 21:48:01
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Kompilcja kernela pod własny sprzęt
config wymaga jeszcze dopracowania, ale to jutro, dziś mi się już nie chce
Windows 8.1
Offline
#37 2010-10-27 21:49:22
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
I tak jest super Bardzo dziękuje za czas i poświęcenie :)
#38 2010-10-27 22:56:26
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Kod:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux debian 2.6.36 #4 SMP PREEMPT Wed Oct 27 21:38:38 CEST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36 root=UUID=2571f967-dd67-4370-bf7f-17181e262066 ro quiet
Build Date: 10 October 2010 11:06:53AM
xorg-server 2:1.7.7-8 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 27 22:42:24 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins,
/usr/share/fonts/X11/misc,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c8a20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0614:1043:82e4 nVidia Corporation G92 [GeForce 9800 GT] rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.36.24 Thu Apr 22 19:52:00 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.1.17
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8600M GT, GeForce 9650M GS, GeForce 8700M GT, Quadro FX 370,
Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570,
Quadro FX 1700, GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS,
GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 295, Quadro CX,
Quadro FX 5800, Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce 9800 GX2, GeForce 9800 GT,
GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO,
GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+,
GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX,
GeForce GTX 260M, Quadro FX 3700, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce GT 120,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce GT 130M,
GeForce 9500 GT, Quadro FX 380, Quadro FX 580, Quadro FX 1700M,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400 GS,
GeForce 9300M GS, GeForce G100, GeForce 9200M GS, GeForce 9300M GS,
Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9100M G, GeForce 8200M G, GeForce 9400, GeForce 9400M G,
GeForce 9400M, GeForce 9300 / nForce 730i, GeForce G102M,
GeForce G102M, GeForce 9400, ION, ION LE, GeForce GT 220,
GeForce 210, GeForce GT 230M, GeForce GT 240M, GeForce G210,
GeForce 205, GeForce 310, GeForce 210, GeForce 310, GeForce G210M,
Quadro FX 380 LP, GeForce GT 240, GeForce GTS 260M, GeForce GTS 250M
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA GeForce 9800 GT at 01@00:00:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x7fd577f06000
(--) NV(0): Total video RAM: 512.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 256.0 MB
(II) NV(0): Linear framebuffer mapped at 0x7fd557f06000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NV(0): Ignoring unsupported TV output 0
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(--) NV(0): Connector map:
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Bus 0 -> SOR0
(--) NV(0): Bus 1 -> DAC2
(--) NV(0): Bus 1 -> SOR1
(--) NV(0): Load detection: 295
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 using monitor section Monitor0
(II) NV(0): Output DVI0 has no monitor section
(II) NV(0): I2C bus "I2C1" initialized.
(II) NV(0): Output VGA2 has no monitor section
(II) NV(0): Output DVI1 has no monitor section
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "I2C0:DDC control interface" registered at address 0x6E.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM Model: 4b7a Serial#: 128595
(II) NV(0): Year: 2009 Week: 9
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
(II) NV(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x864@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) NV(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 106.5 MHz Image Size: 410 x 256 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: W1934
(II) NV(0): Monitor name:
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff001e6d7a4b53f60100
(II) NV(0): 091301036e291a78eae5b5a355499927
(II) NV(0): 135054bfef80950f454f614f81800101
(II) NV(0): 0101010101019a29a0d0518422305098
(II) NV(0): 36009a001100001c000000fd00384b1e
(II) NV(0): 530e000a202020202020000000fc0057
(II) NV(0): 313933340a20202020202020000000fc
(II) NV(0): 00200a2020202020202020202020002c
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID for output VGA1
(II) NV(0): Manufacturer: GSM Model: 4b7a Serial#: 128595
(II) NV(0): Year: 2009 Week: 9
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
(II) NV(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x864@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) NV(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 106.5 MHz Image Size: 410 x 256 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: W1934
(II) NV(0): Monitor name:
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff001e6d7a4b53f60100
(II) NV(0): 091301036e291a78eae5b5a355499927
(II) NV(0): 135054bfef80950f454f614f81800101
(II) NV(0): 0101010101019a29a0d0518422305098
(II) NV(0): 36009a001100001c000000fd00384b1e
(II) NV(0): 530e000a202020202020000000fc0057
(II) NV(0): 313933340a20202020202020000000fc
(II) NV(0): 00200a2020202020202020202020002c
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Using EDID range info for horizontal sync
(II) NV(0): Using EDID range info for vertical refresh
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Printing probed modes for output VGA1
(II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NV(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): EDID for output DVI0
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA2 ... nothing.
(II) NV(0): EDID for output VGA2
(II) NV(0): EDID for output DVI1
(II) NV(0): Output VGA1 connected
(II) NV(0): Output DVI0 disconnected
(II) NV(0): Output VGA2 disconnected
(II) NV(0): Output DVI1 disconnected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output VGA1 using initial mode 1440x900
(II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) NV(0): Virtual size is 1440x1440 (pitch 1536)
(**) NV(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
(II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(**) NV(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NV(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
(II) NV(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(**) NV(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NV(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NV(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NV(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NV(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NV(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NV(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NV(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NV(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NV(0): Display dimensions: (410, 260) mm
(**) NV(0): DPI set to (89, 140)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(--) NV(0): 183.56 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) NV(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
SELinux: Disabled on system, not enabling in X server
(II) NV(0): Setting screen physical size to 381 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event2)
(**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) NOVATEK USB Keyboard: always reports core events
(**) NOVATEK USB Keyboard: Device: "/dev/input/event2"
(II) NOVATEK USB Keyboard: Found keys
(II) NOVATEK USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event3)
(**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) NOVATEK USB Keyboard: always reports core events
(**) NOVATEK USB Keyboard: Device: "/dev/input/event3"
(II) NOVATEK USB Keyboard: Found 19 mouse buttons
(II) NOVATEK USB Keyboard: Found keys
(II) NOVATEK USB Keyboard: Configuring as mouse
(II) NOVATEK USB Keyboard: Configuring as keyboard
(**) NOVATEK USB Keyboard: YAxisMapping: buttons 4 and 5
(**) NOVATEK USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Icon7 Z300 Gaming Laser Mouse (/dev/input/event4)
(**) Icon7 Z300 Gaming Laser Mouse: Applying InputClass "evdev pointer catchall"
(**) Icon7 Z300 Gaming Laser Mouse: always reports core events
(**) Icon7 Z300 Gaming Laser Mouse: Device: "/dev/input/event4"
(II) Icon7 Z300 Gaming Laser Mouse: Found 9 mouse buttons
(II) Icon7 Z300 Gaming Laser Mouse: Found scroll wheel(s)
(II) Icon7 Z300 Gaming Laser Mouse: Found relative axes
(II) Icon7 Z300 Gaming Laser Mouse: Found x and y relative axes
(II) Icon7 Z300 Gaming Laser Mouse: Configuring as mouse
(**) Icon7 Z300 Gaming Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Icon7 Z300 Gaming Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Icon7 Z300 Gaming Laser Mouse" (type: MOUSE)
(II) Icon7 Z300 Gaming Laser Mouse: initialized for relative axes.
(II) config/udev: Adding input device Icon7 Z300 Gaming Laser Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) NV(0): Probing for EDID on I2C bus 0...
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM Model: 4b7a Serial#: 128595
(II) NV(0): Year: 2009 Week: 9
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
(II) NV(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x864@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) NV(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 106.5 MHz Image Size: 410 x 256 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: W1934
(II) NV(0): Monitor name:
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff001e6d7a4b53f60100
(II) NV(0): 091301036e291a78eae5b5a355499927
(II) NV(0): 135054bfef80950f454f614f81800101
(II) NV(0): 0101010101019a29a0d0518422305098
(II) NV(0): 36009a001100001c000000fd00384b1e
(II) NV(0): 530e000a202020202020000000fc0057
(II) NV(0): 313933340a20202020202020000000fc
(II) NV(0): 00200a2020202020202020202020002c
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA2 ... nothing.
(II) NV(0): Probing for EDID on I2C bus 0...
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM Model: 4b7a Serial#: 128595
(II) NV(0): Year: 2009 Week: 9
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
(II) NV(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x864@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) NV(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 106.5 MHz Image Size: 410 x 256 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: W1934
(II) NV(0): Monitor name:
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff001e6d7a4b53f60100
(II) NV(0): 091301036e291a78eae5b5a355499927
(II) NV(0): 135054bfef80950f454f614f81800101
(II) NV(0): 0101010101019a29a0d0518422305098
(II) NV(0): 36009a001100001c000000fd00384b1e
(II) NV(0): 530e000a202020202020000000fc0057
(II) NV(0): 313933340a20202020202020000000fc
(II) NV(0): 00200a2020202020202020202020002c
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA2 ... nothing.
(II) NV(0): Probing for EDID on I2C bus 0...
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM Model: 4b7a Serial#: 128595
(II) NV(0): Year: 2009 Week: 9
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
(II) NV(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x864@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) NV(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 106.5 MHz Image Size: 410 x 256 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: W1934
(II) NV(0): Monitor name:
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff001e6d7a4b53f60100
(II) NV(0): 091301036e291a78eae5b5a355499927
(II) NV(0): 135054bfef80950f454f614f81800101
(II) NV(0): 0101010101019a29a0d0518422305098
(II) NV(0): 36009a001100001c000000fd00384b1e
(II) NV(0): 530e000a202020202020000000fc0057
(II) NV(0): 313933340a20202020202020000000fc
(II) NV(0): 00200a2020202020202020202020002c
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): EDID vendor "GSM", prod id 19322
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA2 ... nothing.#39 2010-10-27 23:02:56
rychu - elektryk dyżurny
- rychu
- elektryk dyżurny
- Skąd: gdańsk/kalmar
- Zarejestrowany: 2004-12-28
Re: Kompilcja kernela pod własny sprzęt
Kod:
(II) NVIDIA GLX Module 195.36.24 Thu Apr 22 19:52:00 PDT 2010 ... (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
te stery z paczek są z kwietnia. ja tam zasysam binarki z nvidia.com ;p
linux regd. user #248790
Offline
#40 2010-10-27 23:10:37
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Kod:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.12 (buildmeister@builder101) Fri Oct 8 11:46:43 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG Electronics W1934"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1440x900_75 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection#41 2010-10-27 23:14:21
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Kod:
Section "Monitor"
Identifier "Configured Monitor"
Option "metamodes" "1440x900_75"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSectionTak mam obecnie i jest kicha
// rozwiązane (w CB) — ArnVaker
zuzaxxx napisał(-a):
Działa :) na karcie graficznej mam dwa wyjścia Wystarczyło zmienić na to bliżej płyty głównej Dzięki za pomoc i Dobranoc
#42 2010-10-28 10:13:24
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Kod:
zuza@debian:~$ lsmod Module Size Used by nls_utf8 1256 1 nls_cp437 5849 1 vfat 10004 1 fat 49515 1 vfat sco 8878 2 bridge 68251 0 stp 1536 1 bridge llc 3657 2 bridge,stp bnep 10327 2 rfcomm 34736 0 l2cap 41270 6 rfcomm,bnep crc16 1257 1 l2cap bluetooth 51346 6 sco,bnep,rfcomm,l2cap uvesafb 20744 0 cfbcopyarea 3145 1 uvesafb cn 5209 2 uvesafb cfbimgblt 2153 1 uvesafb cfbfillrect 3637 1 uvesafb loop 15105 0 nvidia 10013285 28 arc4 1338 2 ecb 1937 2 rt73usb 22020 0 crc_itu_t 1257 1 rt73usb rt2x00usb 7884 1 rt73usb rt2x00lib 27377 2 rt73usb,rt2x00usb led_class 2259 1 rt2x00lib mac80211 193826 2 rt2x00usb,rt2x00lib snd_hda_codec_realtek 268886 1 cfg80211 141371 2 rt2x00lib,mac80211 hso 32614 0 snd_hda_intel 20556 1 snd_hda_codec 48942 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5770 1 snd_hda_codec snd_pcm 64213 2 snd_hda_intel,snd_hda_codec rfkill 15926 4 bluetooth,cfg80211,hso usbhid 18613 0 hid 71997 1 usbhid snd_seq 48601 0 snd_timer 18764 2 snd_pcm,snd_seq snd_seq_device 5235 1 snd_seq snd 47540 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 904 1 snd snd_page_alloc 6953 2 snd_hda_intel,snd_pcm asus_atk0110 10066 0 i2c_core 18009 1 nvidia evdev 8538 9 serio_raw 4398 0 usb_storage 42407 1
http://s1102.chomikuj.pl/File.aspx?id=377348113& … p;name=CONFIG
http://s1128.chomikuj.pl/File.aspx?id=377473569& … mp;name=dmesg
W configu jest poprawiony modem i pendrive Niewiem czemu kopiowanie plików na pendrive teraz tak długo trwa
Ostatnio edytowany przez zuzaxxx (2010-10-28 12:11:47)
#43 2010-10-28 10:26:46
Zbooj - Dark Sith
- Zbooj
- Dark Sith
- Skąd: Siedziba Wszelkiego Zła
- Zarejestrowany: 2005-07-28
Re: Kompilcja kernela pod własny sprzęt
Ja Cię zaraz zastrzelę za to dublowanie postów ;) używaj opcji "Edytuj" ;)
Offline
#44 2010-10-28 13:27:37
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Kompilcja kernela pod własny sprzęt
http://dl.dropbox.com/u/4118086/zuza2.config
usunąłem/dodałem jeszcze trochę nie/potrzebnych śmieci, sprawdź czy wszystko działa, a jak nie działa to napisz co
dzwięk powinien działać a jeśli nie działa to nie wiem dlaczego, jeszcze
widzę także, że dodałaś initrd, do framebuffera? i on tak działa sam z siebie? czy może podałaś mi lsmod i dmesg z innego kernela? :]
i czy używasz wstrzymania, hibernacji?
Windows 8.1
Offline
#45 2010-10-28 14:21:06
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Rozdzielczość miałam mniejszą niż na tamtym configu 800x600
Zainstalowałam sterowniki NVIDIA i jest ok
Waga image to 4,1mb
Waga headers to 6,4 mb
Możliwe że initrd jest bo po wydaniu polecenia make -j2 wydałam polecenie make-kpkg linux-image linux-headers --initrd ?
Nie używam wstrzymania i hibernacji :)
Edimax działa :)
Option Icon 225 Działa :)
Pendrive PATRIOT i SONY Działa :)
Dysk zewnętrzny USB Działa :)
Nagrywarka DVD LG Działa :)
Dźwięk też działa :)
Jeżeli to coś zmieni to nie korzystam z tych szerokich taśm (Bodajże marvel controler) Dysk i nagrywarke mam na sata :)
To wynik lsmod:
Kod:
Module Size Used by sco 7395 2 bridge 56500 0 stp 1376 1 bridge llc 3065 2 bridge,stp bnep 9111 2 rfcomm 28042 0 l2cap 29934 6 bnep,rfcomm crc16 1193 1 l2cap bluetooth 42568 6 sco,bnep,rfcomm,l2cap loop 11828 0 arc4 1242 2 ecb 1793 2 rt73usb 17634 0 crc_itu_t 1193 1 rt73usb nvidia 10010951 28 rt2x00usb 6330 1 rt73usb rt2x00lib 22666 2 rt73usb,rt2x00usb led_class 2067 1 rt2x00lib mac80211 157638 2 rt2x00usb,rt2x00lib cfg80211 112792 2 rt2x00lib,mac80211 snd_hda_codec_realtek 252422 1 rfkill 13246 3 bluetooth,cfg80211 snd_hda_intel 17174 1 snd_hda_codec 48709 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 4724 1 snd_hda_codec snd_pcm 52830 2 snd_hda_intel,snd_hda_codec snd_timer 15472 1 snd_pcm i2c_core 15219 1 nvidia asus_atk0110 8316 0 snd_page_alloc 5753 2 snd_hda_intel,snd_pcm
Ostatnio edytowany przez zuzaxxx (2010-10-28 14:23:42)
#46 2010-10-28 14:31:39
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Kompilcja kernela pod własny sprzęt
To możesz nie dodawać tego --initrd gdyż nie jest potrzebny. Dodałem marvela jako moduł - usunąć całkowicie?
Za kilka-naście minut podeślę poprawiony config.
Windows 8.1
Offline
#47 2010-10-28 14:38:53
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Usuń marvela jak możesz napewno go nie użyje a jakby czasem to teraz go znajde Dziś sporo się bawiłam w konfiguracjach i nie jest to takie straszne :)
Powiedz mi tylko czy ten config nadaje się tylko do debiana i wersji jądra 2.6.36 ? Czy moge go używać na wcześniejszych lub kolejnych nowszych jądrach?
Kod:
Czy przy 4096mb ramu potrzebna jest partycja SWAP ?
Ostatnio edytowany przez zuzaxxx (2010-10-28 14:48:20)
#48 2010-10-28 14:52:23
raven18 - Użytkownik
- raven18
- Użytkownik
- Skąd: /home
- Zarejestrowany: 2009-01-30
Re: Kompilcja kernela pod własny sprzęt
Ja używam tego samego od kilku wersji jądra, wstecz tak samo można, choć kilku opcji może nie być, innym razem kilka opcji będzie więcej.
http://dl.dropbox.com/u/4118086/zuza3.config
i wyłączyłem experimental, powinien wyjść "stabilniejszy" i trochę mniejszy kernel, ale może coś nie działać, więc sprawdź
http://dl.dropbox.com/u/4118086/zuza4.config
Jeszcze trzeba trochę posiedzieć nad tym configiem, jak coś nie będzie działało jak powinno to może ktoś pomoże ;)
Sieci bezprzewodowej nie ruszałem, sama popatrzysz co tam można by jeszcze wywalić.
Ostatnio edytowany przez raven18 (2010-10-28 14:53:56)
Windows 8.1
Offline
#49 2010-10-28 14:53:51
mati75 - Psuj
- mati75
- Psuj
- Skąd: masz ten towar?
- Zarejestrowany: 2010-03-14
Re: Kompilcja kernela pod własny sprzęt
Nie jest potrzebna, jeśli nie używasz hibernacji.
Offline
#50 2010-10-28 14:53:53
zuzaxxx - Gość
- zuzaxxx
- Gość
Re: Kompilcja kernela pod własny sprzęt
Który mam pobrać?
W którym może coś nie działać?
Ostatnio edytowany przez zuzaxxx (2010-10-28 14:54:57)