Forum Debian Users Gang

localhost / # ls -l /boot/config-2.6.34-*
-rw-r--r-- 1 root root 91721 07-24 09:11 /boot/config-2.6.34-gen1
-rw-r--r-- 1 root root 97295 07-25 14:43 /boot/config-2.6.34-gen2
-rw-r--r-- 1 root root 97296 07-24 12:27 /boot/config-2.6.34-gen2.old
-rw-r--r-- 1 root root 94137 07-24 12:13 /boot/config-2.6.34-hardened
localhost / # ls -l /ubuntu/boot/config-2.6.34-*
-rw-r--r-- 1 root root 94826 07-14 12:02 /ubuntu/boot/config-2.6.34-next1
-rw-r--r-- 1 root root 95519 07-14 02:51 /ubuntu/boot/config-2.6.34-next1.old
-rw-r--r-- 1 root root 98210 06-28 07:37 /ubuntu/boot/config-2.6.34-zen1
localhost / #

Linux localhost 2.6.34-gen2 #2 ZEN SMP PREEMPT Sun Jul 25 14:38:13 CEST 2010 i686 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz GenuineIntel GNU/Linux

genkernel initrd

entoo marg1 # lspci -vmm -k
Slot:   00:00.0
Class:  RAM memory
Vendor: nVidia Corporation
Device: MCP55 Memory Controller
SVendor:        Giga-byte Technology
SDevice:        Device 5001
Rev:    a2

Slot:   00:01.0
Class:  ISA bridge
Vendor: nVidia Corporation
Device: MCP55 LPC Bridge
SVendor:        Giga-byte Technology
SDevice:        Device 0c11
Rev:    a3

Slot:   00:01.1
Class:  SMBus
Vendor: nVidia Corporation
Device: MCP55 SMBus
SVendor:        Giga-byte Technology
SDevice:        Device 0c11
Rev:    a3
Driver: nForce2_smbus
Module: i2c-nforce2

Slot:   00:02.0
Class:  USB Controller
Vendor: nVidia Corporation
Device: MCP55 USB Controller
SVendor:        Giga-byte Technology
SDevice:        Device 5004
Rev:    a1
ProgIf: 10
Driver: ohci_hcd
Module: ohci-hcd

Slot:   00:02.1
Class:  USB Controller
Vendor: nVidia Corporation
Device: MCP55 USB Controller
SVendor:        Giga-byte Technology
SDevice:        Device 5004
Rev:    a2
ProgIf: 20
Driver: ehci_hcd
Module: ehci-hcd

Slot:   00:04.0
Class:  IDE interface
Vendor: nVidia Corporation
Device: MCP55 IDE
SVendor:        Giga-byte Technology
SDevice:        Device 5002
Rev:    a1
ProgIf: 8a
Driver: AMD_IDE
Module: pata_acpi
Module: pata_amd

Slot:   00:05.0
Class:  IDE interface
Vendor: nVidia Corporation
Device: MCP55 SATA Controller
SVendor:        Giga-byte Technology
SDevice:        Device b002
Rev:    a3
ProgIf: 85
Driver: sata_nv
Module: pata_acpi
Module: sata_nv

Slot:   00:05.1
Class:  IDE interface
Vendor: nVidia Corporation
Device: MCP55 SATA Controller
SVendor:        Giga-byte Technology
SDevice:        Device b002
Rev:    a3
ProgIf: 85
Driver: sata_nv
Module: pata_acpi
Module: sata_nv

Slot:   00:05.2
Class:  IDE interface
Vendor: nVidia Corporation
Device: MCP55 SATA Controller
SVendor:        Giga-byte Technology
SDevice:        Device b002
Rev:    a3
ProgIf: 85
Driver: sata_nv
Module: pata_acpi
Module: sata_nv

Slot:   00:06.0
Class:  PCI bridge
Vendor: nVidia Corporation
Device: MCP55 PCI bridge
Rev:    a2
ProgIf: 01

Slot:   00:08.0
Class:  Bridge
Vendor: nVidia Corporation
Device: MCP55 Ethernet
SVendor:        Giga-byte Technology
SDevice:        Device e000
Rev:    a3
Driver: forcedeth
Module: forcedeth

Slot:   00:0f.0
Class:  PCI bridge
Vendor: nVidia Corporation
Device: MCP55 PCI Express bridge
Rev:    a3
Driver: pcieport

Slot:   00:18.0
Class:  Host bridge
Vendor: Advanced Micro Devices [AMD]
Device: K8 [Athlon64/Opteron] HyperTransport Technology Configuration

Slot:   00:18.1
Class:  Host bridge
Vendor: Advanced Micro Devices [AMD]
Device: K8 [Athlon64/Opteron] Address Map

Slot:   00:18.2
Class:  Host bridge
Vendor: Advanced Micro Devices [AMD]
Device: K8 [Athlon64/Opteron] DRAM Controller

Slot:   00:18.3
Class:  Host bridge
Vendor: Advanced Micro Devices [AMD]
Device: K8 [Athlon64/Opteron] Miscellaneous Control
Driver: k8temp
Module: k8temp

Slot:   01:07.0
Class:  Network controller
Vendor: RaLink
Device: RT2561/RT61 802.11g PCI
SVendor:        Linksys
SDevice:        WMP54G ver 4.1
Driver: rt61pci
Module: rt61pci

Slot:   01:08.0
Class:  Multimedia audio controller
Vendor: C-Media Electronics Inc
Device: CM8738
SVendor:        C-Media Electronics Inc
SDevice:        CMI8738/C3DX PCI Audio Device
Rev:    10
Driver: C-Media PCI
Module: snd-cmipci

Slot:   02:00.0
Class:  VGA compatible controller
Vendor: nVidia Corporation
Device: G84 [GeForce 8600 GTS]
SVendor:        Giga-byte Technology
SDevice:        Device 3448
Rev:    a1
Driver: nvidia
Module: nvidia

0:00.0 0500: 10de:0369 (rev a2)
00:01.0 0601: 10de:0360 (rev a3)
00:01.1 0c05: 10de:0368 (rev a3)
00:02.0 0c03: 10de:036c (rev a1)
00:02.1 0c03: 10de:036d (rev a2)
00:04.0 0101: 10de:036e (rev a1)
00:05.0 0101: 10de:037f (rev a3)
00:05.1 0101: 10de:037f (rev a3)
00:05.2 0101: 10de:037f (rev a3)
00:06.0 0604: 10de:0370 (rev a2)
00:08.0 0680: 10de:0373 (rev a3)
00:0f.0 0604: 10de:0377 (rev a3)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:07.0 0280: 1814:0301
01:08.0 0401: 13f6:0111 (rev 10)
02:00.0 0300: 10de:0400 (rev a1)

MCP55 SMBus [i2c-nforce2] <I2C_NFORCE2>
MCP55 IDE [pata_amd,amd74xx] <PATA_AMD>
MCP55 SATA Controller [sata_nv] <SATA_NV>
MCP55 Ethernet [forcedeth] <FORCEDETH>
K8 [Athlon64/Opteron] Miscellaneous Control [k8temp] <SENSORS_K8TEMP>
RT2561/RT61 802.11g PCI [rt61pci,rt2x00-source] <RT61PCI>
CM8738 [snd-cmipci,cmpci] <SND_CMIPCI>
G84 [GeForce 8600 GTS] [nv] <SATA_NV>

 1/work/NVIDIA-Linux-x86_64-195.36.31-pkg2'
* CPV:  x11-drivers/nvidia-drivers-195.36.31
 * REPO: gentoo
 * USE:  acpi amd64 elibc_glibc gtk kernel_linux multilib userland_GNU
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found kernel object directory:
 *     /lib/modules/2.6.34-gentoo-r2/build
 * Found sources for kernel version:
 *     2.6.34-gentoo-r2
 * Checking for MTRR support ...
  [ ok ]
>>> Unpacking source...
>>> Unpacking NVIDIA-Linux-x86_64-195.36.31-pkg2.run to /var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/work/NVIDIA-Linux-x86_64-195.36.31-pkg2
>>> Source unpacked in /var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/work
>>> Preparing source in /var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/work/NVIDIA-Linux-x86_64-195.36.31-pkg2 ...
 * Applying NVIDIA_glx-defines.patch ...
  [ ok ]
 * Applying NVIDIA_glx-glheader.patch ...
  [ ok ]
 * Applying 195.30-unified-arch.patch ...
  [ ok ]
 * Converting NVIDIA-Linux-x86_64-195.36.31-pkg2/usr/src/nv/Makefile.kbuild to use M= instead of SUBDIRS= ...
  [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/work/NVIDIA-Linux-x86_64-195.36.31-pkg2 ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/work/NVIDIA-Linux-x86_64-195.36.31-pkg2 ...
 * Preparing nvidia module
make -j3 HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= IGNORE_CC_MISMATCH=yes V=1 SYSSRC=/usr/src/linux SYSOUT=/lib/modules/2.6.34-gentoo-r2/build HOST_CC=x86_64-pc-linux-gnu-gcc CC=x86_64-pc-linux-gnu-gcc clean module 
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.

*** Unable to determine the target kernel version. ***

make: *** [select_makefile] Błąd 1
 * ERROR: x11-drivers/nvidia-drivers-195.36.31 failed:
 *   Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=  IGNORE_CC_MISMATCH=yes V=1 SYSSRC=/usr/src/linux         SYSOUT=/lib/modules/2.6.34-gentoo-r2/build HOST_CC=x86_64-pc-linux-gnu-gcc CC=x86_64-pc-linux-gnu-gcc clean module
 * 
 * Call stack:
 *     ebuild.sh, line   48:  Called src_compile
 *   environment, line 4146:  Called linux-mod_src_compile
 *   environment, line 3078:  Called die
 * The specific snippet of code:
 *               eval "emake HOSTCC=\"$(tc-getBUILD_CC)\"                         CROSS_COMPILE=${CHOST}-                         LDFLAGS=\"$(get_abi_LDFLAGS)\"                         ${BUILD_FIXES}                         ${BUILD_PARAMS}                         ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
 * 
 * If you need support, post the output of 'emerge --info =x11-drivers/nvidia-drivers-195.36.31',
 * the complete build log and the output of 'emerge -pqv =x11-drivers/nvidia-drivers-195.36.31'.
 * The complete build log is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-195.36.31/temp/environment'.
 * S: '/var/tmp/portage/x11-drivers/nvidia-drivers-195.36.3

nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Wed Jul 28 11:01:12 2010
installer version: 256.35

option status:
  license pre-accepted    : false
  update                  : false
  force update            : false
  expert                  : false
  uninstall               : false
  driver info             : false
  precompiled interfaces  : true
  no ncurses color        : false
  query latest version    : false
  OpenGL header files     : true
  no questions            : false
  silent                  : false
  no recursion            : false
  no backup               : false
  kernel module only      : false
  sanity                  : false
  add this kernel         : false
  no runlevel check       : false
  no network              : false
  no ABI note             : false
  no RPMs                 : false
  no kernel module        : false
  force SELinux           : default
  no X server check       : false
  no cc version check     : false
  force tls               : (not specified)
  force compat32 tls      : (not specified)
  X install prefix        : (not specified)
  X library install path  : (not specified)
  X module install path   : (not specified)
  OpenGL install prefix   : (not specified)
  OpenGL install libdir   : (not specified)
  compat32 install chroot : (not specified)
  compat32 install prefix : (not specified)
  compat32 install libdir : (not specified)
  utility install prefix  : (not specified)
  utility install libdir  : (not specified)
  doc install prefix      : (not specified)
  kernel name             : (not specified)
  kernel include path     : (not specified)
  kernel source path      : (not specified)
  kernel output path      : (not specified)
  kernel install path     : (not specified)
  proc mount point        : /proc
  ui                      : (not specified)
  tmpdir                  : /tmp
  ftp mirror              : ftp://download.nvidia.com
  RPM file list           : (not specified)

Using: nvidia-installer ncurses user interface
-> License accepted.
-> Installing NVIDIA driver version 256.35.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
-> Kernel source path: '/lib/modules/2.6.34-gentoo-r2/source'
-> Kernel output path: '/lib/modules/2.6.34-gentoo-r2/build'
ERROR: If you are using a Linux 2.4 kernel, please make sure
       you either have configured kernel sources matching your
       kernel or the correct set of kernel headers installed
       on your system.
       
       If you are using a Linux 2.6 kernel, please make sure
       you have configured kernel sources matching your kernel
       installed on your system. If you specified a separate
       output directory using either the "KBUILD_OUTPUT" or
       the "O" KBUILD parameter, make sure to specify this
       directory with the SYSOUT environment variable or with
       the equivalent nvidia-installer command line option.
       
       Depending on where and how the kernel sources (or the
       kernel headers) were installed, you may need to specify
       their location with the SYSSRC environment variable or
       the equivalent nvidia-installer command line option.
ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find suggestions
       on fixing installation problems in the README available on the Linux
       driver download page at www.nvidia.com.

make && make modules_install 
make install

 module-rebuild rebuild

make && make modules_install
cp arch/i386/boot/bzImage /boot/kernel-2.6.31-gentoo-r6