Forum Debian Users Gang

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc/"
    FontPath     "/usr/share/fonts/TTF/"
    FontPath     "/usr/share/fonts/OTF"
    FontPath     "/usr/share/fonts/Type1/"
    FontPath     "/usr/share/fonts/100dpi/"
    FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
    Load  "glx"
    Load  "record"
    Load  "dri"
    Load  "dri2"
    Load  "dbe"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier  "Card0"
    Driver      "vesa"
    VendorName  "InnoTek Systemberatung GmbH"
    BoardName   "VirtualBox Graphics Adapter"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

emerge -avquDN world

Linux version 2.6.32-gentoo-r7 (root@livecd) (gcc version 4.3.4 (Gentoo 4.3.4 p1.1, pie-10.1.5) ) #1 SMP Mon Jun 7 18:27:00 CEST 2010
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.5 present.
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR variable ranges disabled:
CPU MTRRs all blank - virtualized system.
initial memory mapped : 0 - 00800000
init_memory_mapping: 0000000000000000-000000001fff0000
 0000000000 - 0000400000 page 4k
 0000400000 - 001fc00000 page 2M
 001fc00000 - 001fff0000 page 4k
kernel direct mapping tables up to 1fff0000 @ 7000-c000
RAMDISK: 1fd16000 - 1ffdf3c5
ACPI: RSDP 000e0000 00024 (v02 VBOX  )
ACPI: XSDT 1fff0030 0002C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
ACPI: FACP 1fff00e0 000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
ACPI: DSDT 1fff0220 01A0C (v01 VBOX   VBOXBIOS 00000002 INTL 20050309)
ACPI: FACS 1fff01e0 00040
0MB HIGHMEM available.
511MB LOWMEM available.
  mapped low ram: 0 - 1fff0000
  low ram: 0 - 1fff0000
  node 0 low ram: 00000000 - 1fff0000
  node 0 bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00005fdedc]    TEXT DATA BSS ==> [0000100000 - 00005fdedc]
  #4 [001fd16000 - 001ffdf3c5]          RAMDISK ==> [001fd16000 - 001ffdf3c5]
  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #6 [00005fe000 - 0000600071]              BRK ==> [00005fe000 - 0000600071]
  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001fff0
  HighMem  0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c0562290, node_mem_map c1001000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 992 pages used for memmap
  Normal zone: 125968 pages, LIFO batch:31
Using APIC driver default
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @c1800000 s20760 r0 d24296 u4194304
pcpu-alloc: s20760 r0 d24296 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129935
Kernel command line: root=/dev/ram0 real_root=/dev/hda3
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 510952k/524224k available (3191k kernel code, 12548k reserved, 1313k data, 364k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
      .init : 0xc0567000 - 0xc05c2000   ( 364 kB)
      .data : 0xc041dd82 - 0xc05663cc   (1313 kB)
      .text : 0xc0100000 - 0xc041dd82   (3191 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available
Marking TSC unstable due to could not calculate TSC khz
Calibrating delay loop... 1255.01 BogoMIPS (lpj=6275072)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
mce: CPU supports 0 MCE banks
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0e20)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
APIC timer disabled due to verification failure
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1255.01 BogoMIPS).
CPU0 attaching NULL sched-domain.
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: PCI BIOS revision 2.10 entry at 0xfc080, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe0ffffff]
pci 0000:00:03.0: reg 10 io port: [0xd020-0xd03f]
pci 0000:00:03.0: reg 14 32bit mmio: [0xf0000000-0xf0000fff]
pci 0000:00:03.0: reg 18 32bit mmio: [0xf0080000-0xf00fffff]
pci 0000:00:04.0: reg 10 io port: [0xd040-0xd05f]
pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff]
pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0805000-0xf0805fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
Switching to clocksource pit
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2852k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 1004
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
piix 0000:00:01.1: IDE controller (0x8086:0x7111 rev 0x01)
piix 0000:00:01.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd000-0xd007
    ide1: BM-DMA at 0xd008-0xd00f
Probing IDE interface ide0...
hda: VBOX HARDDISK, ATA DISK drive
hdb: VBOX CD-ROM, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 10485760 sectors (5368 MB) w/256KiB Cache, CHS=10402/16/63
hda: cache flushes supported
 hda: hda1 hda2 hda3
ide-cd driver 5.00
ide-cd: hdb: ATAPI 32X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25 
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.5
aoe: AoE v47 initialised.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 364k freed
Write protecting the kernel text: 3192k
Write protecting the kernel read-only data: 1044k
input: AT Translated Set 2 keyboard as /class/input/input1
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
libata version 3.00 loaded.
Error: Driver 'pata_platform' is already registered, aborting...
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.12
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.12
Fusion MPT FC Host driver 3.04.12
Fusion MPT SAS Host driver 3.04.12
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k6
Emulex LightPulse Fibre Channel SCSI driver 8.3.4
Copyright(c) 2004-2009 Emulex.  All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:0b.0: EHCI Host Controller
ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: irq 10, io mem 0xf0805000
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    412 MB/s
raid6: int32x2    351 MB/s
raid6: int32x4    439 MB/s
raid6: int32x8    446 MB/s
raid6: mmxx1      939 MB/s
raid6: mmxx2     1263 MB/s
raid6: sse1x1     713 MB/s
raid6: sse1x2     950 MB/s
raid6: sse2x1    1255 MB/s
raid6: sse2x2    1505 MB/s
raid6: using algorithm sse2x2 (1505 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :   412.800 MB/sec
xor: using function: pIII_sse (412.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 4019, nTxLock = 32158
fuse init (API version 7.13)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udev: starting version 149
<3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
input: Power Button as /class/input/input3
ACPI: Power Button [PWRF]
input: Sleep Button as /class/input/input4
ACPI: Sleep Button [SLPF]
Floppy drive(s): fd0 is 1.44M
ACPI: AC Adapter [AC] (on-line)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
vboxguest: major 0, IRQ 9, I/O port d040, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 3.2.4 (interface 0x00010004)
pcnet32 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:07:bb:09 assigned IRQ 10.
pcnet32: Found PHY 0022:561b at address 0.
eth0: registered as PCnet/FAST III 79C973
pcnet32: 1 cards_found.
FDC 0 is a S82078B
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
intel8x0_measure_ac97_clock: measured 67080 usecs (7679 samples)
intel8x0: measured clock 114475 rejected
intel8x0_measure_ac97_clock: measured 69682 usecs (8640 samples)
intel8x0: measured clock 123991 rejected
intel8x0_measure_ac97_clock: measured 59755 usecs (7680 samples)
intel8x0: measured clock 128524 rejected
intel8x0: clocking to 48000
EXT3 FS on hda3, internal journal
vboxvideo: Unknown symbol drm_open
vboxvideo: Unknown symbol drm_fasync
vboxvideo: Unknown symbol drm_poll
vboxvideo: Unknown symbol drm_core_get_reg_ofs
vboxvideo: Unknown symbol drm_ioctl
vboxvideo: Unknown symbol drm_exit
vboxvideo: Unknown symbol drm_core_get_map_ofs
vboxvideo: Unknown symbol drm_init
vboxvideo: Unknown symbol drm_vblank_init
vboxvideo: Unknown symbol drm_mmap
vboxvideo: Unknown symbol drm_core_reclaim_buffers
vboxvideo: Unknown symbol drm_release
Adding 1024120k swap on /dev/hda2.  Priority:-1 extents:1 across:1024120k 
Real Time Clock Driver v1.12b
eth0: link up, 100Mbps, full-duplex
vboxvideo: Unknown symbol drm_open
vboxvideo: Unknown symbol drm_fasync
vboxvideo: Unknown symbol drm_poll
vboxvideo: Unknown symbol drm_core_get_reg_ofs
vboxvideo: Unknown symbol drm_ioctl
vboxvideo: Unknown symbol drm_exit
vboxvideo: Unknown symbol drm_core_get_map_ofs
vboxvideo: Unknown symbol drm_init
vboxvideo: Unknown symbol drm_vblank_init
vboxvideo: Unknown symbol drm_mmap
vboxvideo: Unknown symbol drm_core_reclaim_buffers
vboxvideo: Unknown symbol drm_release