Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2016-08-03 20:25:48
milik - 
Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Wolny system a test dysku
Mam zainstalowanego Jessie na lapku, instalacja z XFce i minimalna ilość oprogramowania. Do tego trochę zdjęć i kilka folderów na dysku z dokumentami firmowymi. Przy takiej ilości danych, komputer chodzi jakby był przeładowany danymi i programami, wszystkie aplikacje, razem z przeglądarką Iceweasel uruchamiają się i działają strasznie opornie. Może to problem odczytu i zapisu danych na dysku? Jest jakiś program, który wypluje prędkości zapisu i odczytu?
Kilka informacji:
Kod:
root@irin:/home/michal# arch i686 root@irin:/home/michal# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Intel(R) Celeron(R) M CPU 440 @ 1.86GHz stepping : 12 microcode : 0x54 cpu MHz : 1862.015 cache size : 1024 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor tm2 xtpr pdcm dtherm bogomips : 3724.03 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: root@irin:/home/michal# cat /proc/version Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) root@irin:/home/michal# uname -r 3.16.0-4-686-pae root@irin:/home/michal#
Już nie mówię, że nie mogę w OPEN SHOT żadnego filmu obrobić bo klatkuje jak szlag.
Ostatnio edytowany przez milik (2016-08-03 20:35:58)
Offline
#2 2016-08-03 22:34:06
mati75 - Psuj
- mati75
- Psuj
- Skąd: masz ten towar?
- Zarejestrowany: 2010-03-14
Re: Wolny system a test dysku
iotop sprawdź
Offline
#3 2016-08-04 05:02:44
morfik - Cenzor wirtualnego świata
#4 2016-08-04 18:41:18
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Wolny system a test dysku
Kod:
root@irin:/home/michal# fdisk -l
Disk /dev/sda: 74,5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa6659988
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 152147967 152145920 72,6G 83 Linux
/dev/sda2 152150014 156301311 4151298 2G 5 Extended
/dev/sda5 152150016 156301311 4151296 2G 82 Linux swap / Solaris
root@irin:/home/michal# smartctl -a /dev/sda
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K160
Device Model: Hitachi HTS541680J9SA00
Serial Number: SB2241SGDYBGTE
LU WWN Device Id: 5 000cca 522db7159
Firmware Version: SB2OC70P
User Capacity: 80,026,361,856 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
Local Time is: Thu Aug 4 18:40:47 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 44) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3932
5 Reallocated_Sector_Ct 0x0033 098 098 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 018 018 000 Old_age Always - 36297
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3878
191 G-Sense_Error_Rate 0x000a 099 099 000 Old_age Always - 131073
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 522
193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always - 1595969
194 Temperature_Celsius 0x0002 114 114 000 Old_age Always - 48 (Min/Max -9/61)
196 Reallocated_Event_Count 0x0032 095 095 000 Old_age Always - 651
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 5
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 occurred at disk power-on lifetime: 35617 hours (1484 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 27 d1 4b 84 e4 Error: UNC 39 sectors at LBA = 0x04844bd1 = 75779025
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f0 08 4b 84 e4 08 00:00:29.600 READ DMA
c8 00 08 00 4b 84 e4 08 00:00:29.600 READ DMA
c8 00 08 f8 4a 84 e4 08 00:00:29.600 READ DMA
c8 00 f0 08 4a 84 e4 08 00:00:29.600 READ DMA
c8 00 08 00 4a 84 e4 08 00:00:29.600 READ DMA
Error 4 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 2d 2c 9a e1 Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 2a 2c 9a e1 00 00:00:58.700 READ DMA
c8 00 08 2a 2c 9a e1 00 00:00:54.700 READ DMA
c8 00 08 2a 2c 9a e1 00 00:00:50.800 READ DMA
c8 00 08 2a 2c 9a e1 00 00:00:46.600 READ DMA
c8 00 08 22 01 5c e2 00 00:00:46.600 READ DMA
Error 3 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 2d 2c 9a e1 Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 2a 2c 9a e1 00 00:00:54.700 READ DMA
c8 00 08 2a 2c 9a e1 00 00:00:50.800 READ DMA
c8 00 08 2a 2c 9a e1 00 00:00:46.600 READ DMA
c8 00 08 22 01 5c e2 00 00:00:46.600 READ DMA
c8 00 08 42 2c 9a e1 00 00:00:46.600 READ DMA
Error 2 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 2d 2c 9a e1 Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 2a 2c 9a e1 00 00:00:50.800 READ DMA
c8 00 08 2a 2c 9a e1 00 00:00:46.600 READ DMA
c8 00 08 22 01 5c e2 00 00:00:46.600 READ DMA
c8 00 08 42 2c 9a e1 00 00:00:46.600 READ DMA
c8 00 08 a2 2b 9a e1 00 00:00:46.600 READ DMA
Error 1 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 2d 2c 9a e1 Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 2a 2c 9a e1 00 00:00:46.600 READ DMA
c8 00 08 22 01 5c e2 00 00:00:46.600 READ DMA
c8 00 08 42 2c 9a e1 00 00:00:46.600 READ DMA
c8 00 08 a2 2b 9a e1 00 00:00:46.600 READ DMA
c8 00 08 92 fe 5b e2 00 00:00:46.600 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 26552 -
# 2 Short offline Completed without error 00% 26552 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@irin:/home/michal#Offline
#5 2016-08-04 20:41:50
lis6502 - Łowca lamerów
- lis6502
- Łowca lamerów
- Skąd: Stalinogród
- Zarejestrowany: 2008-12-04
Re: Wolny system a test dysku
G-Sense_Error_Rate 0x000a 099 099 000 Old_age Always - 131073
trośku dużo.
196 Reallocated_Event_Count 0x0032 095 095 000 Old_age Always - 651
After command completion occurred, registers were:
ER ST SC SN CL CH DH
— -- — -- — -- --
40 51 27 d1 4b 84 e4 Error: UNC 39 sectors at LBA = 0x04844bd1 = 75779025
Dysk możesz wysłać do Koszalina.
Offline