Forum Debian Users Gang

Novi-cjusz · 2016-04-01 13:38:02

Zainstalowalem najnowszego Jessie 8.3 zrobilem upgrade Kernela do 4.4 i nie mam dzwieku.

Kod:

robin@debian:~$ su
Password: 
root@debian:/home/robin# cat /etc/debian_version
8.3
root@debian:/home/robin# uname -a
Linux debian 4.4.0-0.bpo.1-amd64 #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20) x86_64 GNU/Linux
root@debian:/home/robin# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port F)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation NV42GL [Quadro FX 3450/4000 SDI] (rev a2)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
04:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
06:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
06:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)
root@debian:/home/robin# lspci -n
00:00.0 0600: 1002:5a14 (rev 02)
00:02.0 0604: 1002:5a16
00:04.0 0604: 1002:5a18
00:05.0 0604: 1002:5a19
00:06.0 0604: 1002:5a1a
00:07.0 0604: 1002:5a1b
00:11.0 0106: 1002:4391 (rev 40)
00:12.0 0c03: 1002:4397
00:12.2 0c03: 1002:4396
00:13.0 0c03: 1002:4397
00:13.2 0c03: 1002:4396
00:14.0 0c05: 1002:4385 (rev 42)
00:14.1 0101: 1002:439c (rev 40)
00:14.2 0403: 1002:4383 (rev 40)
00:14.3 0601: 1002:439d (rev 40)
00:14.4 0604: 1002:4384 (rev 40)
00:14.5 0c03: 1002:4399
00:16.0 0c03: 1002:4397
00:16.2 0c03: 1002:4396
00:18.0 0600: 1022:1600
00:18.1 0600: 1022:1601
00:18.2 0600: 1022:1602
00:18.3 0600: 1022:1603
00:18.4 0600: 1022:1604
00:18.5 0600: 1022:1605
01:00.0 0300: 10de:00cd (rev a2)
02:00.0 0200: 10ec:8168 (rev 09)
03:00.0 0c03: 1b21:1042
04:00.0 0106: 1b21:0612 (rev 01)
05:00.0 0c03: 1b21:1042
06:05.0 0401: 1102:0002 (rev 0a)
06:05.1 0980: 1102:7002 (rev 0a)
root@debian:/home/robin# cat /proc/asound/cards
 0 [SB             ]: HDA-Intel - HDA ATI SB
                      HDA ATI SB at 0xfe400000 irq 16
root@debian:/home/robin# cat /proc/asound/modules
 0 snd_hda_intel
root@debian:/home/robin# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version k4.4.0-0.bpo.1-amd64.
root@debian:/home/robin# dpkg -l | grep alsa
ii  alsa-base                             1.0.27+1                             all          dummy package to ease purging of obsolete conffiles
ii  alsa-utils                            1.0.28-1                             amd64        Utilities for configuring and using ALSA
root@debian:/home/robin# dpkg -l | grep pulse
ii  gstreamer0.10-pulseaudio:amd64        0.10.31-3+nmu4+b1                    amd64        GStreamer plugin for PulseAudio
ii  gstreamer1.0-pulseaudio:amd64         1.4.4-2                              amd64        GStreamer plugin for PulseAudio
ii  libcanberra-pulse:amd64               0.30-2.1                             amd64        PulseAudio backend for libcanberra
ii  libpulse-mainloop-glib0:amd64         5.0-13                               amd64        PulseAudio client libraries (glib support)
ii  libpulse0:amd64                       5.0-13                               amd64        PulseAudio client libraries
ii  libpulsedsp:amd64                     5.0-13                               amd64        PulseAudio OSS pre-load library
ii  pulseaudio                            5.0-13                               amd64        PulseAudio sound server
ii  pulseaudio-module-x11                 5.0-13                               amd64        X11 module for PulseAudio sound server
ii  pulseaudio-utils                      5.0-13                               amd64        Command line tools for the PulseAudio sound server
root@debian:/home/robin#

Jak odzyskac dzwiek? Bardzo prosze o kilka pomocnych slow.

Ostatnio edytowany przez Novi-cjusz (2016-04-04 15:52:57)

morfik · 2016-04-01 13:48:06

Odmutuj suwaki w alsamixer. xD

Novi-cjusz · 2016-04-01 14:05:14

W mikserze mam:
- jako urzadzenie wyjsciowe dzwieku; Digital Output (S/PDIF) - Built-in Audio.
- jako profil: Digital Stereo (IEC958) Output
Nie wiem jak "odmutowac suwaki w alsamixer"....;-)

Zainstalowalem Apulse sugerujac sie tym watkiem: https://forum.dug.net.pl/viewtopic.php?id=27374&p=1
Niestety , nadal cisza.

Ostatnio edytowany przez Novi-cjusz (2016-04-01 14:35:41)

mati75 · 2016-04-01 14:38:20

Zaktualizuj pulseaudio na wersję z backportów. Poza tym co wyrzuca dmesg pokaż.

Novi-cjusz · 2016-04-01 14:49:09

Kod:

root@debian:/home/robin# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64 root=UUID=c9f2f7f2-fdf3-4cb2-8b04-db6bb478f774 ro quiet
[    0.000000] tseg: 00bd800000
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba8fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba8ff000-0x00000000babdafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000babdb000-0x00000000babeafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000babeb000-0x00000000bb957fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb958000-0x00000000bca34fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bca35000-0x00000000bca35fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bca36000-0x00000000bcc3bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcc3c000-0x00000000bd082fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A99X EVO R2.0, BIOS 1708 04/10/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BD800000 mask FFFFFF800000 uncachable
[    0.000000]   3 base 0000BE000000 mask FFFFFE000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000043f000000 aka 17392M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x01d3e000, 0x01d3efff] PGTABLE
[    0.000000] BRK [0x01d3f000, 0x01d3ffff] PGTABLE
[    0.000000] BRK [0x01d40000, 0x01d40fff] PGTABLE
[    0.000000] BRK [0x01d41000, 0x01d41fff] PGTABLE
[    0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[    0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x361e2000-0x370e8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BABE2070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BABE91E8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000BABE2168 007079 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BB952F80 000040
[    0.000000] ACPI: APIC 0x00000000BABE92F8 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BABE9398 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BABE93E0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BABE9420 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000BABE94E8 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: BGRT 0x00000000BABE94B0 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43eff6000-0x43eff9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ba8fefff]
[    0.000000]   node   0: [mem 0x00000000bca35000-0x00000000bca35fff]
[    0.000000]   node   0: [mem 0x00000000bcc3c000-0x00000000bd082fff]
[    0.000000]   node   0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000043effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[    0.000000] On node 0 totalpages: 4168943
[    0.000000]   DMA32 zone: 11956 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 765168 pages, LIFO batch:31
[    0.000000]   Normal zone: 53184 pages used for memmap
[    0.000000]   Normal zone: 3403775 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xba8ff000-0xbabdafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbabdb000-0xbabeafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbabeb000-0xbb957fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb958000-0xbca34fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbca36000-0xbcc3bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xbd800000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88043ec00000 s94040 r8192 d28840 u262144
[    0.000000] pcpu-alloc: s94040 r8192 d28840 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4103782
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64 root=UUID=c9f2f7f2-fdf3-4cb2-8b04-db6bb478f774 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb0000000-0xb3ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
[    0.000000] Memory: 16251764K/16675772K available (5724K kernel code, 1137K rwdata, 2868K rodata, 1308K init, 836K bss, 424008K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:1032 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3511.869 MHz processor
[    0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 7023.73 BogoMIPS (lpj=14047476)
[    0.000024] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20150930
[    0.003321] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.003348] Security Framework initialized
[    0.003349] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.003355] AppArmor: AppArmor disabled by boot time parameter
[    0.004398] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.009131] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011211] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011229] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011557] Initializing cgroup subsys io
[    0.011561] Initializing cgroup subsys memory
[    0.011624] Disabling memory control group subsystem
[    0.011625] Initializing cgroup subsys devices
[    0.011628] Initializing cgroup subsys freezer
[    0.011631] Initializing cgroup subsys net_cls
[    0.011634] Initializing cgroup subsys perf_event
[    0.011637] Initializing cgroup subsys net_prio
[    0.011639] Initializing cgroup subsys pids
[    0.011659] CPU: Physical Processor ID: 0
[    0.011660] CPU: Processor Core ID: 0
[    0.011662] mce: CPU supports 7 MCE banks
[    0.011669] LVT offset 1 assigned for vector 0xf9
[    0.011673] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.011675] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.011892] Freeing SMP alternatives memory: 24K (ffffffff81c65000 - ffffffff81c6b000)
[    0.217974] ftrace: allocating 23763 entries in 93 pages
[    0.224690] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.369954] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.369977] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.369981] ... version:                0
[    0.369982] ... bit width:              48
[    0.369983] ... generic registers:      6
[    0.369984] ... value mask:             0000ffffffffffff
[    0.369985] ... max period:             00007fffffffffff
[    0.369986] ... fixed-purpose events:   0
[    0.369986] ... event mask:             000000000000003f
[    0.370435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.370509] x86: Booting SMP configuration:
[    0.370510] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.390134] x86: Booted up 1 node, 8 CPUs
[    0.390138] smpboot: Total of 8 processors activated (56189.90 BogoMIPS)
[    0.400391] devtmpfs: initialized
[    0.404447] PM: Registering ACPI NVS region [mem 0xbabeb000-0xbb957fff] (14077952 bytes)
[    0.404667] PM: Registering ACPI NVS region [mem 0xbca36000-0xbcc3bfff] (2121728 bytes)
[    0.404780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.404865] pinctrl core: initialized pinctrl subsystem
[    0.404989] NET: Registered protocol family 16
[    0.413970] cpuidle: using governor ladder
[    0.424279] cpuidle: using governor menu
[    0.424357] ACPI: bus type PCI registered
[    0.424359] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.424430] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.424433] PCI: not using MMCONFIG
[    0.424434] PCI: Using configuration type 1 for base access
[    0.424435] PCI: Using configuration type 1 for extended access
[    0.424923] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.424924] mtrr: probably your BIOS does not setup all CPUs.
[    0.424925] mtrr: corrected configuration.
[    0.434225] ACPI: Added _OSI(Module Device)
[    0.434227] ACPI: Added _OSI(Processor Device)
[    0.434228] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.434229] ACPI: Added _OSI(Processor Aggregator Device)
[    0.435348] ACPI: Executed 2 blocks of module-level executable AML code
[    0.437854] ACPI : EC: EC started
[    0.437859] ACPI: Interpreter enabled
[    0.437863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.437867] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.437878] ACPI: (supports S0 S3 S4 S5)
[    0.437879] ACPI: Using IOAPIC for interrupt routing
[    0.438000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.438032] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.438042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.443085] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.443090] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.443094] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.443359] PCI host bridge to bus 0000:00
[    0.443362] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.443364] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.443365] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.443367] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.443368] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.443370] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.443371] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.443373] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.443381] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.443486] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.443517] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.443555] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.443591] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.443620] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.443658] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.443694] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.443722] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.443759] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.443795] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    0.443850] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.443886] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.443921] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[    0.443949] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.443986] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.444032] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.444051] pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
[    0.444058] pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
[    0.444065] pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
[    0.444072] pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
[    0.444078] pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
[    0.444085] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
[    0.444170] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.444182] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
[    0.444255] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.444292] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.444311] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
[    0.444362] pci 0000:00:12.2: supports D1 D2
[    0.444364] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.444402] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.444443] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.444454] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
[    0.444528] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.444566] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.444586] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
[    0.444638] pci 0000:00:13.2: supports D1 D2
[    0.444639] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.444677] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.444716] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.444826] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f
[    0.444838] pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
[    0.444845] pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
[    0.444851] pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
[    0.444858] pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
[    0.444865] pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
[    0.444946] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.444966] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
[    0.445010] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.445073] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.445108] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.445218] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.445277] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.445311] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.445322] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
[    0.445398] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.445436] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.445447] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
[    0.445520] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.445558] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.445576] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
[    0.445628] pci 0000:00:16.2: supports D1 D2
[    0.445629] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.445666] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.445704] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.445771] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.445838] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.445903] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.445975] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.446039] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.446331] pci 0000:01:00.0: [10de:00cd] type 00 class 0x030000
[    0.446347] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.446355] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.446363] pci 0000:01:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.446373] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe01ffff pref]
[    0.446434] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.446439] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.446443] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
[    0.446446] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.446628] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.446654] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.446672] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.446684] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.446730] pci 0000:02:00.0: supports D1 D2
[    0.446731] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.457797] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.457800] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.457804] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.457849] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.457880] pci 0000:03:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
[    0.457957] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.469794] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.469798] pci 0000:00:05.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.469843] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
[    0.469862] pci 0000:04:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.469870] pci 0000:04:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.469876] pci 0000:04:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.469884] pci 0000:04:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.469891] pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.469898] pci 0000:04:00.0: reg 0x24: [mem 0xfe200000-0xfe2001ff]
[    0.481792] pci 0000:00:06.0: PCI bridge to [bus 04]
[    0.481796] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.481798] pci 0000:00:06.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.481844] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.481874] pci 0000:05:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
[    0.481952] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.493792] pci 0000:00:07.0: PCI bridge to [bus 05]
[    0.493796] pci 0000:00:07.0:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.493840] pci 0000:06:05.0: [1102:0002] type 00 class 0x040100
[    0.493862] pci 0000:06:05.0: reg 0x10: [io  0xc000-0xc01f]
[    0.493934] pci 0000:06:05.0: supports D1 D2
[    0.493978] pci 0000:06:05.1: [1102:7002] type 00 class 0x098000
[    0.494000] pci 0000:06:05.1: reg 0x10: [io  0xc020-0xc027]
[    0.494069] pci 0000:06:05.1: supports D1 D2
[    0.494136] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[    0.494139] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.494145] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.494147] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.494148] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.494150] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.494152] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.494153] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.494155] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.494497] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.494553] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.494610] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.494666] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[    0.494712] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.494748] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.494784] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.494820] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.494923] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.494942] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.495042] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.495044] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.495046] vgaarb: loaded
[    0.495047] vgaarb: bridge control possible 0000:01:00.0
[    0.495140] PCI: Using ACPI for IRQ routing
[    0.501290] PCI: pci_cache_line_size set to 64 bytes
[    0.501344] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.501345] e820: reserve RAM buffer [mem 0xba8ff000-0xbbffffff]
[    0.501347] e820: reserve RAM buffer [mem 0xbca36000-0xbfffffff]
[    0.501348] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
[    0.501349] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[    0.501350] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[    0.501478] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.501481] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.503534] clocksource: Switched to clocksource hpet
[    0.509475] pnp: PnP ACPI init
[    0.509568] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.509571] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.509802] system 00:01: [io  0x040b] has been reserved
[    0.509804] system 00:01: [io  0x04d6] has been reserved
[    0.509806] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.509808] system 00:01: [io  0x0c14] has been reserved
[    0.509810] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.509811] system 00:01: [io  0x0c52] has been reserved
[    0.509813] system 00:01: [io  0x0c6c] has been reserved
[    0.509814] system 00:01: [io  0x0c6f] has been reserved
[    0.509816] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.509817] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.509819] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.509820] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.509822] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.509823] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.509825] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.509827] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.509828] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.509830] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.509832] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.509834] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.509836] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.509837] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.509839] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.509841] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.509843] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    0.509845] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.509964] system 00:02: [io  0x0290-0x02af] has been reserved
[    0.509966] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.509994] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.510049] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.510051] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.510087] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.510227] pnp 00:06: [dma 0 disabled]
[    0.510269] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.510381] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.510470] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.510473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.510577] pnp: PnP ACPI: found 9 devices
[    0.517110] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.517134] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.517137] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
[    0.517139] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.517142] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.517144] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.517148] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.517150] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.517153] pci 0000:00:05.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.517156] pci 0000:00:06.0: PCI bridge to [bus 04]
[    0.517158] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.517160] pci 0000:00:06.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.517163] pci 0000:00:07.0: PCI bridge to [bus 05]
[    0.517166] pci 0000:00:07.0:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.517170] pci 0000:00:14.4: PCI bridge to [bus 06]
[    0.517172] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.517181] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.517182] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.517184] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.517186] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.517187] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.517189] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.517190] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.517192] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[    0.517193] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.517195] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.517196] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.517198] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.517199] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.517200] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.517202] pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.517203] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.517205] pci_bus 0000:06: resource 4 [io  0x0000-0x03af window]
[    0.517206] pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7 window]
[    0.517207] pci_bus 0000:06: resource 6 [io  0x03b0-0x03df window]
[    0.517209] pci_bus 0000:06: resource 7 [io  0x0d00-0xffff window]
[    0.517210] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.517211] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.517213] pci_bus 0000:06: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.517296] NET: Registered protocol family 2
[    0.517513] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.517820] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.518065] TCP: Hash tables configured (established 131072 bind 65536)
[    0.518116] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.518195] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.518356] NET: Registered protocol family 1
[    0.807612] pci 0000:01:00.0: Video device with shadowed ROM
[    0.807663] PCI: CLS 64 bytes, default 64
[    0.807704] Unpacking initramfs...
[    1.040752] Freeing initrd memory: 15388K (ffff8800361e2000 - ffff8800370e9000)
[    1.042357] PCI-DMA: Disabling AGP.
[    1.042439] PCI-DMA: aperture base @ b0000000 size 65536 KB
[    1.042440] PCI-DMA: using GART IOMMU.
[    1.042443] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.046742] perf: AMD NB counters detected
[    1.046802] LVT offset 0 assigned for vector 0x400
[    1.046821] perf: AMD IBS detected (0x000000ff)
[    1.047176] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.047218] audit: initializing netlink subsys (disabled)
[    1.047235] audit: type=2000 audit(1459513636.732:1): initialized
[    1.047621] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.047640] zbud: loaded
[    1.047759] VFS: Disk quotas dquot_6.6.0
[    1.047780] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.048247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.048289] io scheduler noop registered
[    1.048291] io scheduler deadline registered
[    1.048307] io scheduler cfq registered (default)
[    1.048678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.048684] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.048724] GHES: HEST is not enabled!
[    1.048783] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.069165] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.069515] Linux agpgart interface v0.103
[    1.069552] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.069553] AMD IOMMUv2 functionality not available on this system
[    1.070206] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.070536] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.070540] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.070664] mousedev: PS/2 mouse device common for all mice
[    1.070702] rtc_cmos 00:03: RTC can wake from S4
[    1.070805] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.070822] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.070836] ledtrig-cpu: registered to indicate activity on CPUs
[    1.071439] NET: Registered protocol family 10
[    1.071628] mip6: Mobile IPv6
[    1.071632] NET: Registered protocol family 17
[    1.071637] mpls_gso: MPLS GSO support
[    1.072112] microcode: CPU0: patch_level=0x0600081f
[    1.072119] microcode: CPU1: patch_level=0x0600081f
[    1.072126] microcode: CPU2: patch_level=0x0600081f
[    1.072133] microcode: CPU3: patch_level=0x0600081f
[    1.072137] microcode: CPU4: patch_level=0x0600081f
[    1.072142] microcode: CPU5: patch_level=0x0600081f
[    1.072151] microcode: CPU6: patch_level=0x0600081f
[    1.072158] microcode: CPU7: patch_level=0x0600081f
[    1.072187] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.072319] registered taskstats version 1
[    1.072346] zswap: loaded using pool lzo/zbud
[    1.072726] rtc_cmos 00:03: setting system clock to 2016-04-01 12:27:17 UTC (1459513637)
[    1.072797] PM: Hibernation image not present or could not be loaded.
[    1.073724] Freeing unused kernel memory: 1308K (ffffffff81b1e000 - ffffffff81c65000)
[    1.073725] Write protecting the kernel read-only data: 10240k
[    1.073956] Freeing unused kernel memory: 408K (ffff88000159a000 - ffff880001600000)
[    1.076350] Freeing unused kernel memory: 1228K (ffff8800018cd000 - ffff880001a00000)
[    1.083023] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.091355] systemd-udevd[97]: starting version 215
[    1.091625] random: systemd-udevd urandom read with 4 bits of entropy available
[    1.099741] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.106022] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.106045] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.106869] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc9000000e000, 60:a4:4c:64:a8:bd, XID 08000800 IRQ 27
[    1.106872] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.107465] SCSI subsystem initialized
[    1.107565] ACPI: bus type USB registered
[    1.107737] usbcore: registered new interface driver usbfs
[    1.107782] usbcore: registered new interface driver hub
[    1.107823] usbcore: registered new device driver usb
[    1.108413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.108670] ehci-pci: EHCI PCI platform driver
[    1.108826] QUIRK: Enable AMD PLL fix
[    1.108853] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.108860] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.108865] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.108875] ehci-pci 0000:00:12.2: debug port 1
[    1.108909] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
[    1.109116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.110200] libata version 3.00 loaded.
[    1.119552] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.119634] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.119638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.119640] usb usb1: Product: EHCI Host Controller
[    1.119642] usb usb1: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ehci_hcd
[    1.119644] usb usb1: SerialNumber: 0000:00:12.2
[    1.120021] hub 1-0:1.0: USB hub found
[    1.120044] hub 1-0:1.0: 5 ports detected
[    1.120365] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.120372] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.179721] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.179895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.179897] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.179898] usb usb2: Product: xHCI Host Controller
[    1.179900] usb usb2: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 xhci-hcd
[    1.179901] usb usb2: SerialNumber: 0000:03:00.0
[    1.180007] hub 2-0:1.0: USB hub found
[    1.180014] hub 2-0:1.0: 2 ports detected
[    1.180111] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.180115] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    1.180124] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.180134] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.180151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.180152] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.180154] usb usb3: Product: xHCI Host Controller
[    1.180155] usb usb3: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 xhci-hcd
[    1.180156] usb usb3: SerialNumber: 0000:03:00.0
[    1.180250] hub 3-0:1.0: USB hub found
[    1.180257] hub 3-0:1.0: 2 ports detected
[    1.180362] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.180366] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.180374] ehci-pci 0000:00:13.2: debug port 1
[    1.180404] ehci-pci 0000:00:13.2: irq 21, io mem 0xfe407000
[    1.191580] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.191667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.191669] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.191671] usb usb4: Product: EHCI Host Controller
[    1.191673] usb usb4: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ehci_hcd
[    1.191674] usb usb4: SerialNumber: 0000:00:13.2
[    1.191796] hub 4-0:1.0: USB hub found
[    1.191808] hub 4-0:1.0: 5 ports detected
[    1.191978] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.191985] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    1.251320] xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.251473] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.251475] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.251476] usb usb5: Product: xHCI Host Controller
[    1.251478] usb usb5: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 xhci-hcd
[    1.251479] usb usb5: SerialNumber: 0000:05:00.0
[    1.251605] hub 5-0:1.0: USB hub found
[    1.251611] hub 5-0:1.0: 2 ports detected
[    1.251695] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.251698] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    1.251706] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.251723] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.251740] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.251741] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.251742] usb usb6: Product: xHCI Host Controller
[    1.251744] usb usb6: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 xhci-hcd
[    1.251745] usb usb6: SerialNumber: 0000:05:00.0
[    1.251839] hub 6-0:1.0: USB hub found
[    1.251847] hub 6-0:1.0: 2 ports detected
[    1.251926] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[    1.251930] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.251941] ehci-pci 0000:00:16.2: debug port 1
[    1.251986] ehci-pci 0000:00:16.2: irq 23, io mem 0xfe404000
[    1.263572] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.263653] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.263656] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.263657] usb usb7: Product: EHCI Host Controller
[    1.263659] usb usb7: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ehci_hcd
[    1.263660] usb usb7: SerialNumber: 0000:00:16.2
[    1.263782] hub 7-0:1.0: USB hub found
[    1.263794] hub 7-0:1.0: 4 ports detected
[    1.264318] ohci-pci: OHCI PCI platform driver
[    1.264768] scsi host0: pata_atiixp
[    1.264920] scsi host1: pata_atiixp
[    1.264965] ata1: PATA max UDMA/100 cmd 0xf040 ctl 0xf030 bmdma 0xf000 irq 17
[    1.264967] ata2: PATA max UDMA/100 cmd 0xf020 ctl 0xf010 bmdma 0xf008 irq 17
[    1.265034] ahci 0000:00:11.0: version 3.0
[    1.265085] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    1.265088] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.265343] scsi host2: ahci
[    1.265438] scsi host3: ahci
[    1.265486] ata3: DUMMY
[    1.265488] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[    1.265593] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.265599] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[    1.265621] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
[    1.265660] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
[    1.265682] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.265685] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    1.265957] scsi host4: ahci
[    1.266048] scsi host5: ahci
[    1.266098] ata5: SATA max UDMA/133 abar m512@0xfe200000 port 0xfe200100 irq 44
[    1.266100] ata6: SATA max UDMA/133 abar m512@0xfe200000 port 0xfe200180 irq 44
[    1.323597] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.323599] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.323600] usb usb8: Product: OHCI PCI host controller
[    1.323602] usb usb8: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ohci_hcd
[    1.323603] usb usb8: SerialNumber: 0000:00:12.0
[    1.323721] hub 8-0:1.0: USB hub found
[    1.323728] hub 8-0:1.0: 5 ports detected
[    1.323912] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.323916] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[    1.323937] ohci-pci 0000:00:13.0: irq 20, io mem 0xfe408000
[    1.383596] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.383598] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.383600] usb usb9: Product: OHCI PCI host controller
[    1.383601] usb usb9: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ohci_hcd
[    1.383602] usb usb9: SerialNumber: 0000:00:13.0
[    1.383729] hub 9-0:1.0: USB hub found
[    1.383736] hub 9-0:1.0: 5 ports detected
[    1.383902] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.383907] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[    1.383920] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
[    1.443565] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.443567] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.443568] usb usb10: Product: OHCI PCI host controller
[    1.443570] usb usb10: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ohci_hcd
[    1.443571] usb usb10: SerialNumber: 0000:00:14.5
[    1.443682] hub 10-0:1.0: USB hub found
[    1.443689] hub 10-0:1.0: 2 ports detected
[    1.443825] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.443829] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[    1.443849] ohci-pci 0000:00:16.0: irq 22, io mem 0xfe405000
[    1.447828] ata1.01: ATAPI: TSSTcorp CDDVDW TS-H653N, HB01, max UDMA/100
[    1.447832] ata1.01: limited to UDMA/33 due to 40-wire cable
[    1.463819] ata1.01: configured for UDMA/33
[    1.465264] scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  HB01 PQ: 0 ANSI: 5
[    1.503603] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    1.503605] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.503607] usb usb11: Product: OHCI PCI host controller
[    1.503608] usb usb11: Manufacturer: Linux 4.4.0-0.bpo.1-amd64 ohci_hcd
[    1.503609] usb usb11: SerialNumber: 0000:00:16.0
[    1.503731] hub 11-0:1.0: USB hub found
[    1.503739] hub 11-0:1.0: 4 ports detected
[    1.587583] ata5: SATA link down (SStatus 0 SControl 300)
[    1.619579] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[    1.663572] usb 8-5: new low-speed USB device number 2 using ohci-pci
[    1.719573] usb 9-1: new low-speed USB device number 2 using ohci-pci
[    1.755580] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.756652] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    1.756654] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.757913] ata4.00: configured for UDMA/133
[    1.758059] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    1.832638] usb 8-5: New USB device found, idVendor=1c4f, idProduct=0024
[    1.832641] usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.832642] usb 8-5: Product: USB Keyboard
[    1.832644] usb 8-5: Manufacturer: SIGMACHIP
[    1.835502] hidraw: raw HID events driver (C) Jiri Kosina
[    1.844751] usbcore: registered new interface driver usbhid
[    1.844753] usbhid: USB HID core driver
[    1.845285] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.0/0003:1C4F:0024.0001/input/input2
[    1.887639] usb 9-1: New USB device found, idVendor=1241, idProduct=1177
[    1.887641] usb 9-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.899705] hid-generic 0003:1C4F:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-5/input0
[    1.899875] input: HID 1241:1177 as /devices/pci0000:00/0000:00:13.0/usb9/9-1/9-1:1.0/0003:1241:1177.0003/input/input3
[    1.899951] hid-generic 0003:1241:1177.0003: input,hidraw1: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:13.0-1/input0
[    1.901734] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.1/0003:1C4F:0024.0002/input/input4
[    1.955626] hid-generic 0003:1C4F:0024.0002: input,hidraw2: USB HID v1.11 Device [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-5/input1
[    1.991054] usb 5-2: New USB device found, idVendor=058f, idProduct=6387
[    1.991056] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.991058] usb 5-2: Product: Mass Storage
[    1.991059] usb 5-2: Manufacturer: Generic
[    1.991061] usb 5-2: SerialNumber: 7AA5FA18
[    1.992740] usb-storage 5-2:1.0: USB Mass Storage device detected
[    1.992830] scsi host6: usb-storage 5-2:1.0
[    1.992893] usbcore: registered new interface driver usb-storage
[    1.993176] usbcore: registered new interface driver uas
[    2.043574] tsc: Refined TSC clocksource calibration: 3511.853 MHz
[    2.043576] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x329f0db83f9, max_idle_ns: 440795261901 ns
[    2.075568] ata6: SATA link down (SStatus 0 SControl 300)
[    2.077394] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.077476] sd 3:0:0:0: [sda] Write Protect is off
[    2.077480] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.077514] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.085817] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.085819] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.085935] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.086363] sr 0:0:1:0: Attached scsi generic sg0 type 5
[    2.086423] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.143059]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    2.143603] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.993284] scsi 6:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
[    2.993592] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.993633] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.994088] sd 6:0:0:0: [sdb] 4177920 512-byte logical blocks: (2.14 GB/1.99 GiB)
[    2.994233] sd 6:0:0:0: [sdb] Write Protect is off
[    2.994236] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    2.994373] sd 6:0:0:0: [sdb] No Caching mode page found
[    2.994413] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.043609] clocksource: Switched to clocksource tsc
[    3.382324]  sdb: sdb1
[    3.383119] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.422904] random: nonblocking pool is initialized
[    5.342885] lp: driver loaded but no devices found
[    5.407122] systemd-udevd[238]: starting version 215
[    5.449557] ppdev: user-space parallel port driver
[    5.565637] fuse init (API version 7.23)
[    6.534434] ACPI: acpi_idle registered with cpuidle
[    6.570835] acpi-cpufreq: overriding BIOS provided _PSD data
[    6.621635] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    6.678335] EDAC MC: Ver: 3.0.0
[    6.712951] systemd-journald[236]: Received request to flush runtime journal from PID 1
[    6.729006] wmi: Mapper loaded
[    6.765677] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    6.765795] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    6.774585] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    6.774593] ACPI: Power Button [PWRB]
[    6.774681] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    6.774685] ACPI: Power Button [PWRF]
[    6.784413] MCE: In-kernel MCE decoding enabled.
[    6.785133] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.951496] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    6.951622] sp5100_tco: PCI Revision ID: 0x42
[    6.951659] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    6.951671] sp5100_tco: Last reboot was not triggered by watchdog.
[    6.951741] sp5100_tco: initialized (0xffffc900018aeb00). heartbeat=60 sec (nowayout=0)
[    6.964719] AMD64 EDAC driver v3.4.0
[    6.964759] EDAC amd64: DRAM ECC disabled.
[    6.964770] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    7.010781] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    7.062212] gameport gameport0: EMU10K1 is pci0000:06:05.1/gameport0, io 0xc020, speed 801kHz
[    7.306389] asus_wmi: ASUS WMI generic driver loaded
[    7.336657] [drm] Initialized drm 1.1.0 20060810
[    7.504302] AVX version of gcm_enc/dec engaged.
[    7.504307] AES CTR mode by8 optimization enabled
[    7.574778] asus_wmi: Initialization: 0x0
[    7.574825] asus_wmi: BIOS WMI version: 0.9
[    7.574909] asus_wmi: SFUN value: 0x0
[    7.575570] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[    7.575836] asus_wmi: Number of fans: 1
[    7.985371] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    7.985379] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.985384] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.985388] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.985391] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    7.985395] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.985399] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    7.985404] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    7.985407] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    8.003969] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    8.006677] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    8.007222] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    8.007785] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    8.008597] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    8.009191] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    8.009598] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    8.010050] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    8.255392] MXM: GUID detected in BIOS
[    8.255626] nouveau 0000:01:00.0: NVIDIA NV42 (042d00a1)
[    8.281076] nouveau 0000:01:00.0: bios: version 05.41.02.50.05
[    8.281715] nouveau 0000:01:00.0: fb: 256 MiB GDDR3
[    9.108882] kvm: Nested Virtualization enabled
[    9.108891] kvm: Nested Paging enabled
[    9.246417] [TTM] Zone  kernel: Available graphics memory: 8168036 kiB
[    9.246420] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    9.246421] [TTM] Initializing pool allocator
[    9.246427] [TTM] Initializing DMA pool allocator
[    9.246440] nouveau 0000:01:00.0: DRM: VRAM: 251 MiB
[    9.246442] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[    9.246446] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[    9.246448] nouveau 0000:01:00.0: DRM: DCB version 3.0
[    9.246450] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[    9.246453] nouveau 0000:01:00.0: DRM: DCB outp 01: 03000302 00000000
[    9.246455] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[    9.246456] nouveau 0000:01:00.0: DRM: DCB outp 03: 04011312 00000000
[    9.246458] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030
[    9.246460] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130
[    9.246596] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[    9.309117] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.309120] [drm] Driver supports precise vblank timestamp query.
[    9.309124] nouveau 0000:01:00.0: DRM: 0xC17A: Parsing digital output script table
[    9.358739] nouveau 0000:01:00.0: DRM: 0xC1CA: Parsing digital output script table
[    9.409208] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[    9.471806] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x9000, bo ffff88042a407c00
[    9.471946] fbcon: nouveaufb (fb0) is primary device
[    9.617028] Console: switching to colour frame buffer device 240x67
[    9.618222] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    9.627579] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    9.878605] RPC: Registered named UNIX socket transport module.
[    9.878610] RPC: Registered udp transport module.
[    9.878613] RPC: Registered tcp transport module.
[    9.878615] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.922333] FS-Cache: Loaded
[    9.964727] FS-Cache: Netfs 'nfs' registered for caching
[   10.024591] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   12.764085] cfg80211: World regulatory domain updated:
[   12.764090] cfg80211:  DFS Master region: unset
[   12.764093] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.764097] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.764100] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.764103] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.764107] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.764111] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.764114] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.764117] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.764119] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.425743] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168f-1.fw (-2)
[   14.426032] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
[   14.426037] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168f-1.fw (-2)
[   14.438427] r8169 0000:02:00.0 eth0: link down
[   14.438430] r8169 0000:02:00.0 eth0: link down
[   16.562107] r8169 0000:02:00.0 eth0: link up
[   59.462619] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   59.563502] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
root@debian:/home/robin#

Kod:

root@debian:/home/robin# pulseaudio -v
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 183ae609419249eda1877174200d4df2.
I: [pulseaudio] main.c: Session ID is 1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /root/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.

Kod:

W: GPG error: http://repozytorium.mati75.eu jessie-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY CCD91D6111A06851

Przyczyna?

Ostatnio edytowany przez Novi-cjusz (2016-04-01 14:57:34)

uzytkownikubunt · 2016-04-01 15:06:43

2896

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:38:23)

morfik · 2016-04-01 15:11:44

Pulse się odpala jako zwykły użytkownik, nie root.

Novi-cjusz · 2016-04-01 15:18:29

Teraz nie mam zadnego! urzadzenia wyjsciowego dzwieku i nie mam nawet ktorego wybrac?!

Kod:

  GNU nano 2.2.6          File: /etc/apt/sources.list                 Modified  

# 

# deb cdrom:[Debian GNU/Linux 8.3.0 _Jessie_ - Official amd64 NETINST Binary-1 $

#deb cdrom:[Debian GNU/Linux 8.3.0 _Jessie_ - Official amd64 NETINST Binary-1 2$

deb http://ftp.de.debian.org/debian/ jessie main
deb-src http://ftp.de.debian.org/debian/ jessie main

deb http://security.debian.org/ jessie/updates main
deb-src http://security.debian.org/ jessie/updates main

# jessie-updates, previously known as 'volatile'
deb http://ftp.de.debian.org/debian/ jessie-updates main
deb-src http://ftp.de.debian.org/debian/ jessie-updates main
deb http://repozytorium.mati75.eu/debian jessie-backports main contrib non-free
#deb-src http://repozytorium.mati75.eu/debian jessie-backports main contrib non$
deb http://ftp.debian.org/debian jessie-backports main


^G Get Help  ^O WriteOut  ^R Read File ^Y Prev Page ^K Cut Text  ^C Cur Pos
^X Exit      ^J Justify   ^W Where Is  ^V Next Page ^U UnCut Text^T To Spell

Ostatnio edytowany przez Novi-cjusz (2016-04-01 15:23:18)

uzytkownikubunt · 2016-04-01 15:23:02

2897

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:38:24)

Novi-cjusz · 2016-04-01 15:25:17

Dalem taka komende:

Kod:

sudo chmod -x /usr/bin/pulseaudio

z tej strony: http://www.srebniak.pl/2013/02/02/linux-rozwiazywan … -z-dzwiekiem/

uzytkownikubunt · 2016-04-01 15:31:10

2898

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:38:25)

Novi-cjusz · 2016-04-01 15:45:48

Po obydwu komendach i restarcie pulseaudio sie znowu podnioslo !
Ale dzwieku nadal nie ma.
Teraz staram sie ustawic alsamixer, mana przeczytalem, dziekuje.
Moge dzialac na wszystkich kanalach AlsaMixer z wyjatkiem tych potrzebnych - S/PDIF.
Sa wlaczone i ciagle "na zero" mimo roznych prob robionych wg mana.

Ostatnio edytowany przez Novi-cjusz (2016-04-01 16:06:16)

uzytkownikubunt · 2016-04-01 16:15:38

2900

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:38:28)

Novi-cjusz · 2016-04-01 16:49:14

Sprawdzilem wszystko co mozliwe
- Alsamixer
- Pavucontrol
Ciagle cisza, to deprymujace.

uzytkownikubunt · 2016-04-01 16:52:31

2901

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:38:29)

Novi-cjusz · 2016-04-01 17:13:44

Juz dodalem:

Kod:

deb http://ftp.debian.org/debian jessie-backports main

do sources.list.
nastepnie bylo w konsoli:

Kod:

apt-get upgrade apt-get update

Reboot.
Ta karta ktora gra tylko bardzo cicho, pavucontrol pokazuje 2-3%, jest widziana przez AlsaMixer jako HDA ATI SB (to jest karta on-board)

morfik · 2016-04-01 17:19:13

No to sobie podbij do 100%

Novi-cjusz · 2016-04-01 17:24:02

Zeby to bylo takie proste, to jest poziomy wskaznik a nie suwak.
To ta karta sprawia tyle klopotu:

Kod:

robin@debian:~$ cat /proc/asound/cards
 0 [SB             ]: HDA-Intel - HDA ATI SB
                      HDA ATI SB at 0xfe400000 irq 16

morfik · 2016-04-01 17:40:29

A aplikacja nie jest przyciszona?

Novi-cjusz · 2016-04-01 17:41:53

Mam youtube na maxa.
Sprzetowo tez jest na maxa..

Ostatnio edytowany przez Novi-cjusz (2016-04-01 17:42:45)

morfik · 2016-04-01 17:47:12

A fizyczny potencjometr od głosników/słuchawek? xD

Novi-cjusz · 2016-04-01 17:49:21

Napisalem, na maxa.Problemem jest, ze w AlsaMixer karta Realtek ALC892 nie jest odpalona.
Pionowe wskazniki sily glosu w mikserze sa na zero.
Jak ten zlom odpalic?

Ostatnio edytowany przez Novi-cjusz (2016-04-01 17:52:36)

morfik · 2016-04-01 17:53:07

O fakt, ślepnę. xD

Ja mam problemy z wyobraźnią, daj fotki. xD

Ostatnio edytowany przez morfik (2016-04-01 17:53:40)

Novi-cjusz · 2016-04-01 17:56:47

To mi zajmie troche czasu bo musze otworzyc konto na jakiejs hostingowni.

morfik · 2016-04-01 18:01:50

Tu się da bez konta przesłać: http://en.zimagez.com/

Forum Debian Users Gang

Ogłoszenie

#1 2016-04-01 13:38:02

Novi-cjusz - Użytkownik

( SOLVED ) Po upgrade, nie mam dzwieku.

Kod:

#2 2016-04-01 13:48:06

morfik - Cenzor wirtualnego świata

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#3 2016-04-01 14:05:14

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#4 2016-04-01 14:38:20

mati75 - Psuj

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#5 2016-04-01 14:49:09

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

Kod:

Kod:

Kod:

#6 2016-04-01 15:06:43

uzytkownikubunt - Zbanowany

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#7 2016-04-01 15:11:44

morfik - Cenzor wirtualnego świata

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#8 2016-04-01 15:18:29

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

Kod:

#9 2016-04-01 15:23:02

uzytkownikubunt - Zbanowany

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#10 2016-04-01 15:25:17

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

Kod:

#11 2016-04-01 15:31:10

uzytkownikubunt - Zbanowany

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#12 2016-04-01 15:45:48

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#13 2016-04-01 16:15:38

uzytkownikubunt - Zbanowany

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#14 2016-04-01 16:49:14

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#15 2016-04-01 16:52:31

uzytkownikubunt - Zbanowany

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#16 2016-04-01 17:13:44

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

Kod:

Kod:

#17 2016-04-01 17:19:13

morfik - Cenzor wirtualnego świata

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#18 2016-04-01 17:24:02

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

Kod:

#19 2016-04-01 17:40:29

morfik - Cenzor wirtualnego świata

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#20 2016-04-01 17:41:53

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#21 2016-04-01 17:47:12

morfik - Cenzor wirtualnego świata

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#22 2016-04-01 17:49:21

Novi-cjusz - Użytkownik

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.

#23 2016-04-01 17:53:07

morfik - Cenzor wirtualnego świata

Re: ( SOLVED ) Po upgrade, nie mam dzwieku.