Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#26  2013-11-22 19:27:18

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Pożegnanie z dyskiem?

No to twórz nowy system plików i jedziesz dalej. :]

EDIT:

Zrobiłem ciekawy test i mogę powiedzieć, że jest szansa na ratunek. Bo w sumie się zastanawiałem jak przywrócić system plików, przecie to nie siedzi w mbr, tylko na partycji.

Zrobiłem sobie testowy pliczek 1GiB sformatowałem go na ext4. Przy formatowaniu zwykle pojawia się coś takiego:

Kod:

root:~# mkfs.ext4 /dev/loop0 
.....
Superblock backups stored on blocks: 
    32768, 98304, 163840, 229376

Wgrałem tam plik textowy i nadpisałem ten plik partycji:

Kod:

root:/# dd if=/dev/zero of=/dev/loop0 bs=512 count=512
512+0 records in
512+0 records out
262144 bytes (262 kB) copied, 0.0796531 s, 3.3 MB/s

Próba zamontowania zwraca:

Kod:

root:/# mount /dev/loop0 /mnt
mount: you must specify the filesystem type

Czyli to tak jak by nie było systemu plików ale partycja by istniała, jak u ciebie. Teraz pora na fsck, ale nieco inaczej:

Kod:

root:/# fsck.ext4 -b 229376 -fv /dev/loop0 
e2fsck 1.42.8 (20-Jun-2013)
Resize inode not valid.  Recreate<y>? yes
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #0 (28681, counted=28682).
Fix<y>? yes
Free blocks count wrong for group #1 (32704, counted=32703).
Fix<y>? yes
Free inodes count wrong for group #0 (7989, counted=7988).
Fix<y>? yes
Free inodes count wrong (63989, counted=63988).
Fix<y>? yes

/dev/loop0: ***** FILE SYSTEM WAS MODIFIED *****

          12 inodes used (0.02%, out of 64000)
           0 non-contiguous files (0.0%)
           0 non-contiguous directories (0.0%)
             # of inodes with ind/dind/tind blocks: 0/0/0
             Extent depth histogram: 4
        8439 blocks used (3.30%, out of 256000)
           0 bad blocks
           0 large files

           1 regular file
           2 directories
           0 character device files
           0 block device files
           0 fifos
           0 links
           0 symbolic links (0 fast symbolic links)
           0 sockets
------------
           3 files
root:/# mount /dev/loop0 /mnt

Wskazałem mu alternatywny superblok, jeden z kopi zapasowych stworzonych przy formatowaniu dysku. System plików się naprawił i zamontował:

Kod:

root:/# ls -al /mnt
total 28K
drwxr-xr-x  3 root root 4.0K Nov 22 20:13 ./
drwxr-xr-x 27 root root 4.0K Nov 22 01:14 ../
drwx------  2 root root  16K Nov 22 20:12 lost+found/
-rw-r--r--  1 root root   57 Nov 22 20:13 testowy_plik
root:/# cat /mnt/testowy_plik 
testowa zawartość testowego pliku na testowej partycji

Także jeśli pamiętasz gdzie masz kopie superbloku, to dasz radę przywrócić system plików, a jak nie to raczej moim zdaniem masz pozamiatane, chyba, że testdisk coś poradzi.

Idę pospisywać sobie numery zapasowych superbloków wszystkich partycji, kto wie kiedy i mi padnie system plików. xD

Ostatnio edytowany przez morfik (2013-11-22 20:50:00)

Offline

 

#27  2013-11-23 21:03:47

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Hm...
Wczoraj nie przeczytałem edytowanego posta, ale zrobiłem to samo.
Przywróciłem system plików z superbloku.
Tego próbowałem już wcześniej, ale wczoraj do skutku (za którąś próbą zadziałało).
Niedodałem y do polecenia, więc się napotwierdzałem...
Niestety pliki trafiły do lost+found.
Ale udało mi się zrobić kopię domowego i /var/log, jeszcze poszukam /etc.
To chyba maksimum co mogę osiągnąć.
Mam co prawda kopię tej partycji (ale zrobioną dopiero po szkodzie...), jednak wątpię w celowość dalszych prób.

Dane trafiły też na pendraka i próbuję zmienić uprawnienia lub właściciela.
Po kilku próbach google i vwidzę, że fat(alny) system plików tego nie obsługuje...

Się zastanawiam, czy stawiać na tym dysku jeszcze raz Debiana, mimo , że smart nic nie pokazuje?

Offline

 

#28  2013-11-23 21:27:00

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Pożegnanie z dyskiem?

Po mojemu to coś ci rozwaliło superblok partycji. Nie wiem czy to było działanie przez nieuwagę czy czynniki X grają tu większą rolę. W każdym razie czego teraz się obawiasz? Tworzysz nowy system plików i instalujesz, tylko se zrób kopie superbloków.

A można wiedzieć na czym polegały te próby, że za którąś zadziałało? Popatrz na te dwie partycje:

Mała:

Kod:

root:/# dumpe2fs /dev/sda1 | grep -i superblock
dumpe2fs 1.42.8 (20-Jun-2013)
  Primary superblock at 0, Group descriptors at 1-1
  Backup superblock at 32768, Group descriptors at 32769-32769
  Backup superblock at 98304, Group descriptors at 98305-98305
  Backup superblock at 163840, Group descriptors at 163841-163841
  Backup superblock at 229376, Group descriptors at 229377-229377

I duża:

Kod:

  
root:/# dumpe2fs /dev/mapper/crypt_p2p | grep -i superblock
dumpe2fs 1.42.8 (20-Jun-2013)
  Primary superblock at 0, Group descriptors at 1-19
  Backup superblock at 32768, Group descriptors at 32769-32787
  Backup superblock at 98304, Group descriptors at 98305-98323
  Backup superblock at 163840, Group descriptors at 163841-163859
  Backup superblock at 229376, Group descriptors at 229377-229395
  Backup superblock at 294912, Group descriptors at 294913-294931
  Backup superblock at 819200, Group descriptors at 819201-819219
  Backup superblock at 884736, Group descriptors at 884737-884755
  Backup superblock at 1605632, Group descriptors at 1605633-1605651
  Backup superblock at 2654208, Group descriptors at 2654209-2654227
  Backup superblock at 4096000, Group descriptors at 4096001-4096019
  Backup superblock at 7962624, Group descriptors at 7962625-7962643
  Backup superblock at 11239424, Group descriptors at 11239425-11239443
  Backup superblock at 20480000, Group descriptors at 20480001-20480019
  Backup superblock at 23887872, Group descriptors at 23887873-23887891
  Backup superblock at 71663616, Group descriptors at 71663617-71663635

Jak można zauważyć, początkowe bloki są takie same.

Offline

 

#29  2013-11-23 23:33:12

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Polegały na wklepywaniu kolejnych numerów do polecenia przywracającego.
Aż zadziałało.

Offline

 

#30  2013-11-24 00:40:16

  marcin'82 - Użytkownik

marcin'82
Użytkownik
Zarejestrowany: 2011-10-02

Re: Pożegnanie z dyskiem?

Wczoraj nie przeczytałem edytowanego posta, ale zrobiłem to samo.

No to czuja miałem dobrego. Sam fsck Ci to podpowiedział ... No to w końcu sukces czy fail?

Offline

 

#31  2013-11-24 16:55:50

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Zależy jak na to spojrzeć.
Dane zrzucone do lost+found.
Odzyskałem to na czym mi najbardziej zależało, niby nic bardzo ważnego, ale i to cieszy.

Offline

 

#32  2013-11-27 17:40:55

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Po przejechaniu się po dysku badblockiem wyszło, że na sda3 i sda2 (partycje systemowe, odpowiednio: Arch i Debian z którego została sieczka) zakradło się złe...

Kod:

badblocks /dev/sda2
3822396
3822397
3822398
3822399
12934316
12934317
12934318
12934319
badblocks /dev/sda3
16998604
16998605
16998606
16998607
16998608
16998609
169986010
169986011

Myślę co by Archa przenieść na wolną partycję (jak się uda...), a na innej, "bezbłędnej" postawić Debiana.
Sda2 i Sda3 sformatować z wyłączeniem badów.
Zresztą nie muszę ich używać...


No i kupić nowy dysk.
Jaki?
Sdd?
Jak ja lubię wybierać...
Pażdzierz spośród paździerzy...
A ten green przeznaczyć na filmy i tym podobne rzeczy.

Offline

 

#33  2013-11-27 17:49:02

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Pożegnanie z dyskiem?

Realokuj je ręcznie, po co formatować? Pokaż raport smart.

Offline

 

#34  2013-11-27 18:09:07

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Bo straciłem zaufanie.
Do dysku w ogólności, a sda2/3 w szczególności...

Offline

 

#35  2015-10-05 19:06:17

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Niecałe dwa lata (od ostatniego posta oczywiście) popracował - głównie: filmy, vdi, i takie tam.
Kilka dni temu ponownie zastrajkował.
Zaczął się "ciąć" film podczas oglądania.
Co nieco udało mi się przekopiować, część plików uszkodzona.
Problemy z montowaniem niekórych partycji.

Kod:

                        res 61/04:08:f4:55:e8/00:00:04:00:00/e4 Emask 0x1 (device error)
[33691.749398] ata5.00: status: { DRDY DF ERR }
[33691.749399] ata5.00: error: { ABRT }
[33691.752140] ata5.00: failed to enable AA (error_mask=0x1)
[33691.754361] ata5.00: failed to enable AA (error_mask=0x1)
[33691.754372] ata5.00: configured for UDMA/133 (device error ignored)
[33691.754418] ata5: EH complete
[33691.764400] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[33691.764405] ata5.00: irq_stat 0x40000001
[33691.764408] ata5.00: failed command: WRITE DMA
[33691.764414] ata5.00: cmd ca/00:08:f4:55:e8/00:00:00:00:00/e4 tag 29 dma 4096 out
                        res 61/04:08:f4:55:e8/00:00:04:00:00/e4 Emask 0x1 (device error)
[33691.764416] ata5.00: status: { DRDY DF ERR }
[33691.764417] ata5.00: error: { ABRT }
[33691.767162] ata5.00: failed to enable AA (error_mask=0x1)
[33691.769389] ata5.00: failed to enable AA (error_mask=0x1)
[33691.769399] ata5.00: configured for UDMA/133 (device error ignored)
[33691.769432] ata5: EH complete
[33691.779391] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[33691.779395] ata5.00: irq_stat 0x40000001
[33691.779399] ata5.00: failed command: WRITE DMA
[33691.779404] ata5.00: cmd ca/00:08:f4:55:e8/00:00:00:00:00/e4 tag 10 dma 4096 out
                        res 61/04:08:f4:55:e8/00:00:04:00:00/e4 Emask 0x1 (device error)
[33691.779406] ata5.00: status: { DRDY DF ERR }
[33691.779407] ata5.00: error: { ABRT }
[33691.782202] ata5.00: failed to enable AA (error_mask=0x1)
[33691.784489] ata5.00: failed to enable AA (error_mask=0x1)
[33691.784500] ata5.00: configured for UDMA/133 (device error ignored)
[33691.784542] ata5: EH complete
[33691.794395] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[33691.794400] ata5.00: irq_stat 0x40000001
[33691.794404] ata5.00: failed command: WRITE DMA
[33691.794410] ata5.00: cmd ca/00:08:f4:55:e8/00:00:00:00:00/e4 tag 22 dma 4096 out
                        res 61/04:08:f4:55:e8/00:00:04:00:00/e4 Emask 0x1 (device error)
[33691.794412] ata5.00: status: { DRDY DF ERR }
[33691.794413] ata5.00: error: { ABRT }
[33691.797221] ata5.00: failed to enable AA (error_mask=0x1)
[33691.799474] ata5.00: failed to enable AA (error_mask=0x1)
[33691.799486] ata5.00: configured for UDMA/133 (device error ignored)
[33691.799526] ata5: EH complete
[33691.809434] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[33691.809442] ata5.00: irq_stat 0x40000001
[33691.809448] ata5.00: failed command: WRITE DMA
[33691.809460] ata5.00: cmd ca/00:08:f4:55:e8/00:00:00:00:00/e4 tag 3 dma 4096 out
                        res 61/04:08:f4:55:e8/00:00:04:00:00/e4 Emask 0x1 (device error)
[33691.809464] ata5.00: status: { DRDY DF ERR }
[33691.809468] ata5.00: error: { ABRT }
[33691.812262] ata5.00: failed to enable AA (error_mask=0x1)
[33691.816420] ata5.00: failed to enable AA (error_mask=0x1)
[33691.816440] ata5.00: configured for UDMA/133 (device error ignored)

To fragment logu podczas jechania badblockiem jednej z partycji.
Poniżej pierwszy smart, jeszcze przed próbą "ratowania" (w cudzym słowie, bo nic ważnego nie zginęło) danych.

Kod:

smartctl -a /dev/sdb
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2-1.dmz.2-liquorix-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green
Device Model:     WDC WD10EADS-11M2B2
Serial Number:    WD-WCAV58289545
LU WWN Device Id: 5 0014ee 2aebbcafd
Firmware Version: 80.00A80
User Capacity:    1,000,204,886,016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Oct  4 20:16:18 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 120) The previous self-test completed having
                                        the read element of the test failed.
Total time to complete Offline 
data collection:                (20100) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 231) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3031) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   132   124   021    Pre-fail  Always       -       6358
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1981
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   078   078   000    Old_age   Always       -       16063
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1970
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       215
193 Load_Cycle_Count        0x0032   144   144   000    Old_age   Always       -       168361
194 Temperature_Celsius     0x0022   108   101   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   192   192   000    Old_age   Always       -       1445
198 Offline_Uncorrectable   0x0030   192   192   000    Old_age   Offline      -       1354
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       6
200 Multi_Zone_Error_Rate   0x0008   182   182   000    Old_age   Offline      -       3657

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       80%     16063         1951610504
# 2  Short offline       Completed: read failure       90%     10119         4294625112

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
    Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Po próbach (częściowo udanych) skopiowania danych.

Kod:

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   191   191   051    Pre-fail  Always       -       839
  3 Spin_Up_Time            0x0027   132   124   021    Pre-fail  Always       -       6358
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1981
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   078   078   000    Old_age   Always       -       16072
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1970
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       215
193 Load_Cycle_Count        0x0032   144   144   000    Old_age   Always       -       168361
194 Temperature_Celsius     0x0022   108   101   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   192   192   000    Old_age   Always       -       1445
198 Offline_Uncorrectable   0x0030   200   192   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       6
200 Multi_Zone_Error_Rate   0x0008   200   182   000    Old_age   Offline      -       70

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       80%     16063         1951610504
# 2  Short offline       Completed: read failure       90%     10119         4294625112

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Kilka (8?) godzin temu puściłem badblocks na jednej z bardziej problematycznych partycji.

Kod:

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   191   191   051    Pre-fail  Always       -       839
  3 Spin_Up_Time            0x0027   133   124   021    Pre-fail  Always       -       6316
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1982
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   078   078   000    Old_age   Always       -       16081
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1971
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       216
193 Load_Cycle_Count        0x0032   144   144   000    Old_age   Always       -       168361
194 Temperature_Celsius     0x0022   109   101   000    Old_age   Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   192   192   000    Old_age   Always       -       1445
198 Offline_Uncorrectable   0x0030   200   192   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       6
200 Multi_Zone_Error_Rate   0x0008   200   182   000    Old_age   Offline      -       70

SMART Error Log Version: 1
Warning: ATA error count 1602 inconsistent with error log pointer 5

ATA Error Count: 1602 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1602 occurred at disk power-on lifetime: 16081 hours (670 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT
  
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      09:32:35.363  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.360  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      09:32:35.360  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      09:32:35.360  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.358  IDENTIFY DEVICE

Error 1601 occurred at disk power-on lifetime: 16081 hours (670 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 08      09:32:35.360  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      09:32:35.360  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.358  IDENTIFY DEVICE
  ca 00 08 74 58 e8 e4 08      09:32:35.348  WRITE DMA
  ef 10 02 00 00 00 a0 08      09:32:35.348  SET FEATURES [Enable SATA feature]

Error 1600 occurred at disk power-on lifetime: 16081 hours (670 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      09:32:35.360  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.358  IDENTIFY DEVICE
  ca 00 08 74 58 e8 e4 08      09:32:35.348  WRITE DMA
  ef 10 02 00 00 00 a0 08      09:32:35.348  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.346  IDENTIFY DEVICE
Error 1599 occurred at disk power-on lifetime: 16081 hours (670 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 08 74 58 e8 e4  Device Fault; Error: ABRT at LBA = 0x04e85874 = 82335860

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 74 58 e8 e4 08      09:32:35.348  WRITE DMA
  ef 10 02 00 00 00 a0 08      09:32:35.348  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.346  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      09:32:35.346  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      09:32:35.346  SET FEATURES [Enable SATA feature]

Error 1598 occurred at disk power-on lifetime: 16081 hours (670 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      09:32:35.348  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.346  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      09:32:35.346  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      09:32:35.346  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      09:32:35.344  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       80%     16063         1951610504
# 2  Short offline       Completed: read failure       90%     10119         4294625112

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Offline

 

#36  2015-10-05 19:37:22

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Pożegnanie z dyskiem?

No i? Ty poprzepisuj te sektory, których masz 1445, wtedy dopiero zostaną oznaczone jako padnięte, choć ich jest już naprawdę dużo i moim zdaniem kup se nowy dysk. xD

Jedyna opcja jaką widzę, to format całego dysku ze skanowaniem powierzchni -- szybciej będzie. Choć i tak bym ten dysk wyrzucił. xD

Ostatnio edytowany przez morfik (2015-10-05 19:38:46)

Offline

 

#37  2015-10-05 19:46:05

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Jasne, nie przewiduję dla niego przyszłości.
Choć pewnie pobawię się nim trochę.
Natomiast w zły humor wprawiły mnie ceny dysków, które zobaczyłem wczoraj, na "wiodącym portalu".
Miałem prawie dwuletnią przerwę w kupowaniu dysku i naiwnie oczekiwałem niższych cen...

Offline

 

#38  2015-10-07 22:00:55

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Ta "zabawa" szybko mi się znudziła.
Zapuściłem whdd.
Nie skończył, czytał kilka godzin (8? 9?) i straciłem cierpliwość w pewnym miejscu (już pod koniec) same UNC.
Skupmy się na dramatycznym pytaniu: jaki dysk (1000 GB) za dwie stówy?

Offline

 

#39  2015-10-07 23:16:28

  skullman - Użytkownik

skullman
Użytkownik
Zarejestrowany: 2010-04-08

Re: Pożegnanie z dyskiem?

WD Blue (może parę złotych więcej) albo, choć osobiście nie używałem, Hitachi Ultrastar.

Offline

 

#40  2015-10-11 00:00:03

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

Właściwie wyboru wielkiego nie ma.
W tej cenie grę wchodzą:
Seagate ST1000DM003
WD Blue
Chyba, że dołożyć i kupić:
WD Red (3 lata gwarancji) ok. 50 zł więcej
lub
WD Black (5 lat gwarancji) ok. 100 zł?
Tylko, w ten sposób, to zaraz dojdę do:
WD VelociRaptor...

Offline

 

#41  2015-10-11 08:28:01

  Hepita - Użytkownik

Hepita
Użytkownik
Skąd: 127.0.0.1
Zarejestrowany: 2014-10-30

Re: Pożegnanie z dyskiem?

Ten seagate chodzi u mnie od trochę ponad roku, na razie ma się dobrze.


Arch Linux + KDE Plasma 5.12@Core i5 4460 + GTX 750 Ti + 4 GB RAM

Offline

 

#42  2015-10-11 10:07:46

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Pożegnanie z dyskiem?

Jeśli chcesz ten dysk jako storage, a nie pod system (lub do innych zastosowań), to odpuść sobie black. Na to się nadaje jedynie jakiś green. xD

Offline

 

#43  2015-10-11 12:01:25

  skullman - Użytkownik

skullman
Użytkownik
Zarejestrowany: 2010-04-08

Re: Pożegnanie z dyskiem?

Więc brałbym WD blue.

Ostatnio edytowany przez skullman (2015-10-11 12:01:47)

Offline

 

#44  2015-10-11 18:13:59

  einsam - Użytkownik

einsam
Użytkownik
Zarejestrowany: 2008-06-24

Re: Pożegnanie z dyskiem?

morfik napisał(-a):

Na to się nadaje jedynie jakiś green. xD

Green powiadasz?
Może i racja.
Jednak czas na nowe wyzwania i będzie to (o ile mi się jeszcze nie odwidzi) zgodnie z sugestią @skullman blue.
Niestety hitachi w poczciwej cenie namierzyłem, jedynie za wielką wodą.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)