Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2013-05-23 18:37:40

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Blad w LXDE -przeciazenie?

Witam
Mam problem w LXDE - po odpaleniu wiekszej ilosci zakladek w chrominium komputer przerywa wysylanie sygnalu do monitora, po czym sie wlacza i pojawia panel logowania i nie mam juz otwartej przegladarki. Do tego gdy jeszcze slucham muzyki przez jakis program, po logowaniu nie widze nigdzie jego dzialalnosci, ale slychac muzyke z playlisty. Zawartosc mojego "sprzetu":

Kod:

# dmidecode 2.11
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
35 structures occupying 1156 bytes.
Table at 0x000E8E30.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
    Vendor: Phoenix Technologies LTD
    Version: R01-A1F
    Release Date: 06/02/2003
    Address: 0xE29D0
    Runtime Size: 120368 bytes
    ROM Size: 512 kB
    Characteristics:
        ISA is supported
        PCI is supported
        PC Card (PCMCIA) is supported
        PNP is supported
        APM is supported
        BIOS is upgradeable
        BIOS shadowing is allowed
        ESCD support is available
        Boot from CD is supported
        ACPI is supported
        USB legacy is supported
        AGP is supported
        Smart battery is supported
        BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
    Manufacturer: FUJITSU SIEMENS
    Product Name: AMILO D SERIES 
    Version: R01-A1A       
    Serial Number: 19144YZ100731701167K000        
    UUID: 1AA32080-7BE8-11D7-BC4E-F22D967E50A2
    Wake-up Type: Power Switch

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
    Manufacturer: FUJITSU SIEMENS
    Type: Notebook
    Lock: Not Present
    Version: N/A            
    Serial Number: 9144YZ100731701167K000          
    Asset Tag: ABCDEFGHIJKLM                   
    Boot-up State: Safe
    Power Supply State: Safe
    Thermal State: Safe
    Security Status: None
    OEM Information: 0x00001234

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
    Socket Designation: U1
    Type: Central Processor
    Family: Pentium 4
    Manufacturer: GenuineIntel
    ID: 27 0F 00 00 FF F9 EB BF
    Signature: Type 0, Family 15, Model 2, Stepping 7
    Flags:
        FPU (Floating-point unit on-chip)
        VME (Virtual mode extension)
        DE (Debugging extension)
        PSE (Page size extension)
        TSC (Time stamp counter)
        MSR (Model specific registers)
        PAE (Physical address extension)
        MCE (Machine check exception)
        CX8 (CMPXCHG8 instruction supported)
        SEP (Fast system call)
        MTRR (Memory type range registers)
        PGE (Page global enable)
        MCA (Machine check architecture)
        CMOV (Conditional move instruction supported)
        PAT (Page attribute table)
        PSE-36 (36-bit page size extension)
        CLFSH (CLFLUSH instruction supported)
        DS (Debug store)
        ACPI (ACPI supported)
        MMX (MMX technology supported)
        FXSR (FXSAVE and FXSTOR instructions supported)
        SSE (Streaming SIMD extensions)
        SSE2 (Streaming SIMD extensions 2)
        SS (Self-snoop)
        HTT (Multi-threading)
        TM (Thermal monitor supported)
        PBE (Pending break enabled)
    Version: Intel(R) Pentium(
    Voltage: 1.3 V
    External Clock: Unknown
    Max Speed: 2400 MHz
    Current Speed: 2800 MHz
    Status: Populated, Enabled
    Upgrade: Slot 1
    L1 Cache Handle: 0x0008
    L2 Cache Handle: 0x0009
    L3 Cache Handle: Not Provided
    Serial Number: Not Specified
    Asset Tag: Not Specified
    Part Number: Not Specified

Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
    Error Detecting Method: None
    Error Correcting Capabilities:
        None
    Supported Interleave: One-way Interleave
    Current Interleave: One-way Interleave
    Maximum Memory Module Size: 512 MB
    Maximum Total Memory Size: 1024 MB
    Supported Speeds:
        70 ns
        60 ns
    Supported Memory Types:
        DIMM
        SDRAM
    Memory Module Voltage: 3.3 V
    Associated Memory Slots: 2
        0x0006
        0x0007
    Enabled Error Correcting Capabilities:
        Unknown

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
    Socket Designation: M1
    Bank Connections: 0 1
    Current Speed: Unknown
    Type: DIMM SDRAM
    Installed Size: 256 MB (Double-bank Connection)
    Enabled Size: 256 MB (Double-bank Connection)
    Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
    Socket Designation: M2
    Bank Connections: 2 3
    Current Speed: Unknown
    Type: DIMM SDRAM
    Installed Size: 256 MB (Double-bank Connection)
    Enabled Size: 256 MB (Double-bank Connection)
    Error Status: OK

Handle 0x0008, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L1 Cache
    Configuration: Enabled, Socketed, Level 1
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 20 kB
    Maximum Size: 20 kB
    Supported SRAM Types:
        Burst
        Pipeline Burst
        Asynchronous
    Installed SRAM Type: Asynchronous
    Speed: Unknown
    Error Correction Type: None
    System Type: Other
    Associativity: Other

Handle 0x0009, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L2 Cache
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 512 kB
    Maximum Size: 512 kB
    Supported SRAM Types:
        Burst
        Pipeline Burst
        Asynchronous
    Installed SRAM Type: Burst
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: Other

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN2
    Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
    External Reference Designator: Serial 1
    External Connector Type: DB-9 male
    Port Type: Serial Port 16550A Compatible

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN3
    Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
    External Reference Designator: Parallel
    External Connector Type: DB-25 female
    Port Type: Parallel Port ECP/EPP

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN1
    Internal Connector Type: None
    External Reference Designator: Keyboard
    External Connector Type: PS/2
    Port Type: Keyboard Port

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN1
    Internal Connector Type: None
    External Reference Designator: Mouse
    External Connector Type: PS/2
    Port Type: Mouse Port

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN5
    Internal Connector Type: None
    External Reference Designator: USB
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN6
    Internal Connector Type: None
    External Reference Designator: USB
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN26
    Internal Connector Type: None
    External Reference Designator: MODEM
    External Connector Type: RJ-11
    Port Type: Modem Port

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: U49
    Internal Connector Type: None
    External Reference Designator: LAN
    External Connector Type: RJ-45
    Port Type: Network Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN24
    Internal Connector Type: None
    External Reference Designator: LINE-IN JACK
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN24
    Internal Connector Type: None
    External Reference Designator: HEADPHONE-OUT JACK
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN2
    Internal Connector Type: None
    External Reference Designator: EXTERNAL DISPLAY
    External Connector Type: DB-15 female
    Port Type: Video Port

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN2
    Internal Connector Type: None
    External Reference Designator: IEEE 1394
    External Connector Type: IEEE 1394
    Port Type: Firewire (IEEE P1394)

Handle 0x0016, DMI type 9, 13 bytes
System Slot Information
    Designation: CARDBUS A
    Type: 32-bit PC Card (PCMCIA)
    Current Usage: Available
    Length: Other
    ID: Adapter 0, Socket 1
    Characteristics:
        5.0 V is provided
        3.3 V is provided
        PC Card-16 is supported
        Cardbus is supported
        PME signal is supported

Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
    Designation: CARDBUS B
    Type: 32-bit PC Card (PCMCIA)
    Current Usage: Available
    Length: Other
    ID: Adapter 0, Socket 2
    Characteristics:
        5.0 V is provided
        3.3 V is provided
        PC Card-16 is supported
        Cardbus is supported
        PME signal is supported

Handle 0x0018, DMI type 10, 8 bytes
On Board Device 1 Information
    Type: Video
    Status: Enabled
    Description: ATI M9000
On Board Device 2 Information
    Type: Sound
    Status: Enabled
    Description: SIS 7012

Handle 0x0019, DMI type 11, 5 bytes
OEM Strings
    String 1: 1
    String 2: 1234567890

Handle 0x001A, DMI type 12, 5 bytes
System Configuration Options
    Option 1: Jumper settings can be described here.

Handle 0x001B, DMI type 16, 15 bytes
Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: None
    Maximum Capacity: 1 GB
    Error Information Handle: Not Provided
    Number Of Devices: 2

Handle 0x001C, DMI type 17, 27 bytes
Memory Device
    Array Handle: 0x001B
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 256 MB
    Form Factor: DIMM
    Set: 2
    Locator: M1
    Bank Locator: Bank 0
    Type: SDRAM
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: Not Specified
    Serial Number: Not Specified
    Asset Tag: Not Specified
    Part Number: Not Specified

Handle 0x001D, DMI type 17, 27 bytes
Memory Device
    Array Handle: 0x001B
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 256 MB
    Form Factor: DIMM
    Set: 2
    Locator: M2
    Bank Locator: Bank 1
    Type: SDRAM
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: Not Specified
    Serial Number: Not Specified
    Asset Tag: Not Specified
    Part Number: Not Specified

Handle 0x001E, DMI type 19, 15 bytes
Memory Array Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0001FFFFFFF
    Range Size: 512 MB
    Physical Array Handle: 0x001B
    Partition Width: 2

Handle 0x001F, DMI type 20, 19 bytes
Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0000FFFFFFF
    Range Size: 256 MB
    Physical Device Handle: 0x001C
    Memory Array Mapped Address Handle: 0x001E
    Partition Row Position: 1

Handle 0x0020, DMI type 20, 19 bytes
Memory Device Mapped Address
    Starting Address: 0x00010000000
    Ending Address: 0x0001FFFFFFF
    Range Size: 256 MB
    Physical Device Handle: 0x001D
    Memory Array Mapped Address Handle: 0x001E
    Partition Row Position: 1

Handle 0x0021, DMI type 32, 20 bytes
System Boot Information
    Status: <OUT OF SPEC>

Handle 0x0022, DMI type 127, 4 bytes
End Of Table

Wrong DMI structures count: 35 announced, only 34 decoded.

root@gruber:/home/gruby# free
             total       used       free     shared    buffers     cached
Mem:        512348     473380      38968          0      18440     205964
-/+ buffers/cache:     248976     263372
Swap:      1042428       8756    1033672

Offline

 

#2  2013-05-23 19:17:00

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: Blad w LXDE -przeciazenie?

Stąd pewność, że to problem LXDE? Może chromium wywala xserver? Pokaż:

Kod:

cat /var/log/Xorg.0.log.old

Ostatnio edytowany przez mati75 (2013-05-23 19:17:17)

https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#3  2013-05-24 00:57:41

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Re: Blad w LXDE -przeciazenie?

Nie mam pewnosci, ale tez za slabo sie znam na tym. Wywnioskowalem ze albo grafa albo nakladka graficzna, skoro mi wylacza na chwile monitor.

Kod:

[    26.721] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    26.721] X Protocol Version 11, Revision 0
[    26.721] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[    26.721] Current Operating System: Linux gruber 3.2.0-4-686-pae #1 SMP Debian 3.2.41-2 i686
[    26.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=0da2534a-fdcf-4917-8434-eb3d50581431 ro quiet
[    26.722] Build Date: 17 April 2013  11:13:16AM
[    26.722] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) 
[    26.722] Current version of pixman: 0.26.0
[    26.722]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    26.722] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.722] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 23 11:25:40 2013
[    26.816] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.851] (==) No Layout section.  Using the first Screen section.
[    26.851] (==) No screen section available. Using defaults.
[    26.851] (**) |-->Screen "Default Screen Section" (0)
[    26.851] (**) |   |-->Monitor "<default monitor>"
[    26.882] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    26.882] (==) Automatically adding devices
[    26.882] (==) Automatically enabling devices
[    26.931] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    26.931]     Entry deleted from font path.
[    26.931] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    built-ins
[    26.931] (==) ModulePath set to "/usr/lib/xorg/modules"
[    26.931] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.931] (II) Loader magic: 0xb77c85a0
[    26.931] (II) Module ABI versions:
[    26.931]     X.Org ANSI C Emulation: 0.4
[    26.931]     X.Org Video Driver: 12.1
[    26.931]     X.Org XInput driver : 16.0
[    26.931]     X.Org Server Extension : 6.0
[    26.934] (--) PCI:*(0:1:0:0) 1002:4c66:17c0:2058 rev 1, Mem @ 0xf0000000/134217728, 0xec100000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[    26.934] (II) Open ACPI successful (/var/run/acpid.socket)
[    26.935] (II) LoadModule: "extmod"
[    26.956] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    26.990] (II) Module extmod: vendor="X.Org Foundation"
[    26.990]     compiled for 1.12.4, module version = 1.0.0
[    26.990]     Module class: X.Org Server Extension
[    26.991]     ABI class: X.Org Server Extension, version 6.0
[    26.991] (II) Loading extension SELinux
[    26.991] (II) Loading extension MIT-SCREEN-SAVER
[    26.991] (II) Loading extension XFree86-VidModeExtension
[    26.991] (II) Loading extension XFree86-DGA
[    26.991] (II) Loading extension DPMS
[    26.991] (II) Loading extension XVideo
[    26.991] (II) Loading extension XVideo-MotionCompensation
[    26.991] (II) Loading extension X-Resource
[    26.991] (II) LoadModule: "dbe"
[    26.991] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    27.007] (II) Module dbe: vendor="X.Org Foundation"
[    27.007]     compiled for 1.12.4, module version = 1.0.0
[    27.007]     Module class: X.Org Server Extension
[    27.007]     ABI class: X.Org Server Extension, version 6.0
[    27.007] (II) Loading extension DOUBLE-BUFFER
[    27.007] (II) LoadModule: "glx"
[    27.008] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.235] (II) Module glx: vendor="X.Org Foundation"
[    27.235]     compiled for 1.12.4, module version = 1.0.0
[    27.235]     ABI class: X.Org Server Extension, version 6.0
[    27.235] (==) AIGLX enabled
[    27.236] (II) Loading extension GLX
[    27.236] (II) LoadModule: "record"
[    27.236] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    27.263] (II) Module record: vendor="X.Org Foundation"
[    27.263]     compiled for 1.12.4, module version = 1.13.0
[    27.263]     Module class: X.Org Server Extension
[    27.263]     ABI class: X.Org Server Extension, version 6.0
[    27.263] (II) Loading extension RECORD
[    27.263] (II) LoadModule: "dri"
[    27.264] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    27.297] (II) Module dri: vendor="X.Org Foundation"
[    27.297]     compiled for 1.12.4, module version = 1.0.0
[    27.297]     ABI class: X.Org Server Extension, version 6.0
[    27.297] (II) Loading extension XFree86-DRI
[    27.297] (II) LoadModule: "dri2"
[    27.297] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.352] (II) Module dri2: vendor="X.Org Foundation"
[    27.353]     compiled for 1.12.4, module version = 1.2.0
[    27.353]     ABI class: X.Org Server Extension, version 6.0
[    27.353] (II) Loading extension DRI2
[    27.353] (==) Matched ati as autoconfigured driver 0
[    27.353] (==) Matched vesa as autoconfigured driver 1
[    27.353] (==) Matched fbdev as autoconfigured driver 2
[    27.353] (==) Assigned the driver to the xf86ConfigLayout
[    27.353] (II) LoadModule: "ati"
[    27.353] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    27.379] (II) Module ati: vendor="X.Org Foundation"
[    27.379]     compiled for 1.12.4, module version = 6.14.99
[    27.379]     Module class: X.Org Video Driver
[    27.379]     ABI class: X.Org Video Driver, version 12.1
[    27.379] (II) LoadModule: "radeon"
[    27.379] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    27.474] (II) Module radeon: vendor="X.Org Foundation"
[    27.474]     compiled for 1.12.4, module version = 6.14.99
[    27.474]     Module class: X.Org Video Driver
[    27.474]     ABI class: X.Org Video Driver, version 12.1
[    27.555] (II) LoadModule: "vesa"
[    27.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.574] (II) Module vesa: vendor="X.Org Foundation"
[    27.574]     compiled for 1.12.1, module version = 2.3.1
[    27.574]     Module class: X.Org Video Driver
[    27.574]     ABI class: X.Org Video Driver, version 12.0
[    27.574] (II) LoadModule: "fbdev"
[    27.574] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.598] (II) Module fbdev: vendor="X.Org Foundation"
[    27.598]     compiled for 1.12.1, module version = 0.4.2
[    27.598]     ABI class: X.Org Video Driver, version 12.0
[    27.599] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA
[    27.608] (II) VESA: driver for VESA chipsets: vesa
[    27.608] (II) FBDEV: driver for framebuffer: fbdev
[    27.608] (++) using VT number 7

[    27.609] (II) [KMS] Kernel modesetting enabled.
[    27.609] (WW) Falling back to old probe method for vesa
[    27.609] (WW) Falling back to old probe method for fbdev
[    27.609] (II) Loading sub module "fbdevhw"
[    27.609] (II) LoadModule: "fbdevhw"
[    27.609] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.633] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.633]     compiled for 1.12.4, module version = 0.0.2
[    27.633]     ABI class: X.Org Video Driver, version 12.1
[    27.633] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    27.633] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    27.663] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    27.663] (==) RADEON(0): Default visual is TrueColor
[    27.663] (==) RADEON(0): RGB weight 888
[    27.663] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    27.663] (--) RADEON(0): Chipset: "ATI Radeon Mobility 9000 (M9) Lf (AGP)" (ChipID = 0x4c66)
[    27.663] (II) RADEON(0): AGP card detected
[    27.663] drmOpenDevice: node name is /dev/dri/card0
[    27.664] drmOpenDevice: open result is 9, (OK)
[    27.664] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    27.664] drmOpenDevice: node name is /dev/dri/card0
[    27.664] drmOpenDevice: open result is 9, (OK)
[    27.664] drmOpenByBusid: drmOpenMinor returns 9
[    27.664] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    27.664] (II) Loading sub module "exa"
[    27.664] (II) LoadModule: "exa"
[    27.664] (II) Loading /usr/lib/xorg/modules/libexa.so
[    27.685] (II) Module exa: vendor="X.Org Foundation"
[    27.685]     compiled for 1.12.4, module version = 2.5.0
[    27.685]     ABI class: X.Org Video Driver, version 12.1
[    27.685] (II) RADEON(0): KMS Color Tiling: disabled
[    27.685] (II) RADEON(0): KMS Pageflipping: enabled
[    27.685] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    27.693] (II) RADEON(0): Output VGA-0 has no monitor section
[    27.694] (II) RADEON(0): Output LVDS has no monitor section
[    27.694] (II) RADEON(0): Output S-video has no monitor section
[    27.707] (II) RADEON(0): EDID for output VGA-0
[    27.707] (II) RADEON(0): Printing probed modes for output VGA-0
[    27.707] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.707] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.707] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.707] (II) RADEON(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    27.707] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    27.707] (II) RADEON(0): EDID for output LVDS
[    27.707] (II) RADEON(0): Printing probed modes for output LVDS
[    27.707] (II) RADEON(0): Modeline "1400x1050"x60.2  108.00  1400 34208 34320 1688  1050 1050 1053 1063 (64.0 kHz eP)
[    27.707] (II) RADEON(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[    27.707] (II) RADEON(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz)
[    27.707] (II) RADEON(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.1 kHz)
[    27.707] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    27.707] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    27.707] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    27.707] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    27.707] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    27.707] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    27.707] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    27.707] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    27.707] (II) RADEON(0): EDID for output S-video
[    27.707] (II) RADEON(0): Output VGA-0 connected
[    27.707] (II) RADEON(0): Output LVDS connected
[    27.707] (II) RADEON(0): Output S-video disconnected
[    27.707] (II) RADEON(0): Using fuzzy aspect match for initial modes
[    27.707] (II) RADEON(0): Output VGA-0 using initial mode 1024x768
[    27.707] (II) RADEON(0): Output LVDS using initial mode 1024x768
[    27.707] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.707] (II) RADEON(0): mem size init: gart size :3dff000 vram size: s:4000000 visible:3a1c000
[    27.707] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    27.708] (==) RADEON(0): DPI set to (96, 96)
[    27.708] (II) Loading sub module "fb"
[    27.708] (II) LoadModule: "fb"
[    27.708] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.721] (II) Module fb: vendor="X.Org Foundation"
[    27.721]     compiled for 1.12.4, module version = 1.0.0
[    27.721]     ABI class: X.Org ANSI C Emulation, version 0.4
[    27.721] (II) Loading sub module "ramdac"
[    27.721] (II) LoadModule: "ramdac"
[    27.721] (II) Module "ramdac" already built-in
[    27.721] (II) UnloadModule: "vesa"
[    27.721] (II) Unloading vesa
[    27.721] (II) UnloadModule: "fbdev"
[    27.721] (II) Unloading fbdev
[    27.721] (II) UnloadSubModule: "fbdevhw"
[    27.721] (II) Unloading fbdevhw
[    27.721] (--) Depth 24 pixmap format is 32 bpp
[    27.746] (II) RADEON(0): [DRI2] Setup complete
[    27.746] (II) RADEON(0): [DRI2]   DRI driver: r200
[    27.746] (II) RADEON(0): [DRI2]   VDPAU driver: r200
[    27.746] (II) RADEON(0): Front buffer size: 3072K
[    27.747] (II) RADEON(0): VRAM usage limit set to 50788K
[    27.765] (==) RADEON(0): Backing store disabled
[    27.765] (II) RADEON(0): Direct rendering enabled
[    27.789] (II) RADEON(0): Render acceleration enabled for R200 type cards.
[    27.789] (II) RADEON(0): Setting EXA maxPitchBytes
[    27.789] (II) EXA(0): Driver allocated offscreen pixmaps
[    27.789] (II) EXA(0): Driver registered support for the following operations:
[    27.789] (II)         Solid
[    27.789] (II)         Copy
[    27.789] (II)         Composite (RENDER acceleration)
[    27.789] (II)         UploadToScreen
[    27.789] (II)         DownloadFromScreen
[    27.811] (II) RADEON(0): Acceleration enabled
[    27.811] (==) RADEON(0): DPMS enabled
[    27.811] (==) RADEON(0): Silken mouse enabled
[    27.823] (II) RADEON(0): Set up textured video
[    27.823] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    27.823] (II) RADEON(0): [XvMC] Extension initialized.
[    27.823] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.823] (--) RandR disabled
[    27.823] (II) Initializing built-in extension Generic Event Extension
[    27.823] (II) Initializing built-in extension SHAPE
[    27.823] (II) Initializing built-in extension MIT-SHM
[    27.823] (II) Initializing built-in extension XInputExtension
[    27.823] (II) Initializing built-in extension XTEST
[    27.823] (II) Initializing built-in extension BIG-REQUESTS
[    27.823] (II) Initializing built-in extension SYNC
[    27.823] (II) Initializing built-in extension XKEYBOARD
[    27.823] (II) Initializing built-in extension XC-MISC
[    27.823] (II) Initializing built-in extension SECURITY
[    27.823] (II) Initializing built-in extension XINERAMA
[    27.823] (II) Initializing built-in extension XFIXES
[    27.824] (II) Initializing built-in extension RENDER
[    27.824] (II) Initializing built-in extension RANDR
[    27.824] (II) Initializing built-in extension COMPOSITE
[    27.824] (II) Initializing built-in extension DAMAGE
[    27.824] (II) SELinux: Disabled on system
[    28.344] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    28.344] (II) AIGLX: enabled GLX_INTEL_swap_event
[    28.344] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    28.344] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    28.344] (II) AIGLX: Loaded and initialized r200
[    28.344] (II) GLX: Initialized DRI2 GL provider for screen 0
[    28.408] (II) RADEON(0): Setting screen physical size to 270 x 203
[    28.989] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    28.989] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.989] (II) LoadModule: "evdev"
[    28.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.001] (II) Module evdev: vendor="X.Org Foundation"
[    29.001]     compiled for 1.12.1, module version = 2.7.0
[    29.001]     Module class: X.Org XInput Driver
[    29.001]     ABI class: X.Org XInput driver, version 16.0
[    29.001] (II) Using input driver 'evdev' for 'Power Button'
[    29.001] (**) Power Button: always reports core events
[    29.001] (**) evdev: Power Button: Device: "/dev/input/event5"
[    29.001] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.001] (--) evdev: Power Button: Found keys
[    29.001] (II) evdev: Power Button: Configuring as keyboard
[    29.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    29.001] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.001] (**) Option "xkb_rules" "evdev"
[    29.001] (**) Option "xkb_model" "pc105"
[    29.001] (**) Option "xkb_layout" "pl"
[    29.088] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    29.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.088] (II) Using input driver 'evdev' for 'Power Button'
[    29.089] (**) Power Button: always reports core events
[    29.089] (**) evdev: Power Button: Device: "/dev/input/event2"
[    29.089] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.089] (--) evdev: Power Button: Found keys
[    29.089] (II) evdev: Power Button: Configuring as keyboard
[    29.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    29.089] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    29.089] (**) Option "xkb_rules" "evdev"
[    29.089] (**) Option "xkb_model" "pc105"
[    29.089] (**) Option "xkb_layout" "pl"
[    29.090] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    29.090] (II) No input driver specified, ignoring this device.
[    29.090] (II) This device may have been added with another device file.
[    29.090] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    29.090] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    29.090] (II) Using input driver 'evdev' for 'Sleep Button'
[    29.090] (**) Sleep Button: always reports core events
[    29.090] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    29.090] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    29.090] (--) evdev: Sleep Button: Found keys
[    29.090] (II) evdev: Sleep Button: Configuring as keyboard
[    29.091] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[    29.091] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    29.091] (**) Option "xkb_rules" "evdev"
[    29.091] (**) Option "xkb_model" "pc105"
[    29.091] (**) Option "xkb_layout" "pl"
[    29.096] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[    29.096] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    29.096] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[    29.096] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    29.096] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[    29.096] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[    29.096] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[    29.096] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    29.096] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[    29.096] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    29.096] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    29.096] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    29.096] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    29.096] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    29.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0/input/input1/event1"
[    29.096] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[    29.096] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    29.097] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    29.097] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    29.097] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    29.097] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    29.097] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    29.097] (II) No input driver specified, ignoring this device.
[    29.097] (II) This device may have been added with another device file.
[    29.098] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    29.098] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.098] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    29.098] (**) AT Translated Set 2 keyboard: always reports core events
[    29.098] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    29.098] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    29.098] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    29.098] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    29.098] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    29.098] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    29.098] (**) Option "xkb_rules" "evdev"
[    29.098] (**) Option "xkb_model" "pc105"
[    29.098] (**) Option "xkb_layout" "pl"
[    29.102] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    29.102] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    29.102] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    29.102] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    29.102] (II) LoadModule: "synaptics"
[    29.102] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.145] (II) Module synaptics: vendor="X.Org Foundation"
[    29.145]     compiled for 1.12.4, module version = 1.6.2
[    29.145]     Module class: X.Org XInput Driver
[    29.145]     ABI class: X.Org XInput driver, version 16.0
[    29.145] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    29.145] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.145] (**) Option "Device" "/dev/input/event7"
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    29.145] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.145] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.145] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    29.145] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    29.145] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    29.145] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    29.145] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    29.146] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    29.146] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    29.146] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    29.146] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    29.146] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.146] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    29.146] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    29.147] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    29.147] (II) No input driver specified, ignoring this device.
[    29.147] (II) This device may have been added with another device file.
[    29.149] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
[    29.149] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    29.149] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    29.149] (**) ACPI Virtual Keyboard Device: always reports core events
[    29.149] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
[    29.149] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    29.149] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    29.149] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    29.149] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[    29.149] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[    29.149] (**) Option "xkb_rules" "evdev"
[    29.149] (**) Option "xkb_model" "pc105"
[    29.149] (**) Option "xkb_layout" "pl"
[ 25121.866] [mi] EQ overflowing.  Additional events will be discarded until existing events are processed.
[ 25121.869] 
[ 25121.869] Backtrace:
[ 25122.253] 
[ 25122.253] Backtrace:

Czy moze byc tak, ze przegladarka wykozystala caly dostepny RAM + swap i sie wysypuje?

Ostatnio edytowany przez Red3miasto (2013-05-24 03:07:03)

Offline

 

#4  2013-05-24 07:08:02

  marcin'82 - Użytkownik

marcin'82
Użytkownik
Zarejestrowany: 2011-10-02

Re: Blad w LXDE -przeciazenie?

Czy moze byc tak, ze przegladarka wykozystala caly dostepny RAM + swap i sie wysypuje?

Zaloguj użycie pamięci, potem wstawisz plik:

Kod:

free -s 5 > ~/Pulpit/free

Na pulpicie będzie plik. Jak będzie zwiecha - wstaw plik na forum.

Offline

 

#5  2013-05-24 08:48:02

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: Blad w LXDE -przeciazenie?

Mi to na wygaszacz ekranu wygląda. Można spróbować tak:

Kod:

killall -9 xscreensaver
https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#6  2013-06-10 16:53:06

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Re: Blad w LXDE -przeciazenie?

@marcin'82
Ta komenda nie dziala:

Kod:

# free -s 5 > ~/Pulpit/free
bash: /root/Pulpit/free: Nie ma takiego pliku ani katalogu
/home/gruby/Desktop# free -s 5 > /home/gruby/desktop/free
bash: /home/gruby/desktop/free: Nie jest katalogiem

@mati75
myslalem ze pomoglo - guzik, ciagle wywala, nawet potrafi swiezo po wpisaniu tej komendy

Offline

 

#7  2013-06-10 20:29:27

  marcin'82 - Użytkownik

marcin'82
Użytkownik
Zarejestrowany: 2011-10-02

Re: Blad w LXDE -przeciazenie?

To jedziesz domyślnie na koncie roota? Brawo!
Z konta zwykłego użytkownika daj wynik ...

Offline

 

#8  2013-06-10 20:55:16

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Re: Blad w LXDE -przeciazenie?

komendy odpalam z konsoli z roota, "jade" na swoim koncie, a odp ta sama:

Kod:

free -s 5 > ~/Pulpit/free
bash: /home/gruby/Pulpit/free: Nie ma takiego pliku ani katalogu

lub (bo takie mam nazwy katalogow):

Kod:

gruby@gruber:~$ free -s 5 > ~/desktop/free
bash: /home/gruby/desktop/free: Nie jest katalogiem

Ostatnio edytowany przez Red3miasto (2013-06-10 20:56:31)

Offline

 

#9  2013-06-10 21:06:35

  pioki - Użytkownik

pioki
Użytkownik
Zarejestrowany: 2010-04-10

Re: Blad w LXDE -przeciazenie?

W Linuksie jest różnica czy piszesz z dużej czy małej litery. Spróbuj:

Kod:

free -s 5 > ~/Desktop/free

Offline

 

#10  2013-06-11 12:25:13

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Re: Blad w LXDE -przeciazenie?

@pioki
Twoja komenda pomogla. dzieki za info dot wielkosci liter - nie wiedzialem o tym. Jak sie wstawia plik na forum? wrzucilem tu http://www.hellupload.com/f9maegn0fsqb/free.html

Ostatnio edytowany przez Red3miasto (2013-06-11 12:44:57)

Offline

 

#11  2013-06-11 12:58:37

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Blad w LXDE -przeciazenie?

Krótkie wyniki z konsoli normalnie umieść na forum w znaczniku Code.
Dłuższe w jakimś serwisie typu pastebin.com lub wklej.dug.net.pl

Chyba nikt nie będzie specjalnie dla ciebie ściągał jakichś plików.
I wbij sobie do głowy, że do większości rzeczy nie potrzeba uprawnień roota bo to już kolejny wątek, w którym tak bezmyślnie działasz.

Offline

 

#12  2013-06-11 18:00:15

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Re: Blad w LXDE -przeciazenie?

dlugie, tu wynik http://wklej.dug.net.pl/4538

Offline

 

#13  2013-11-16 14:03:55

  Red3miasto - Użytkownik

Red3miasto
Użytkownik
Zarejestrowany: 2013-01-12

Re: Blad w LXDE -przeciazenie?

Przepraszam, ze post pod postem, ale musze odswiezyc temat
zabicie wygaszacza nie pomoglo, a to z komendy

Kod:

free -s 5 > ~/Desktop/free

Kod:

             total       used       free     shared    buffers     cached
Mem:        512344     497360      14984          0       7248     223860
-/+ buffers/cache:     266252     246092
Swap:      1042428       9304    1033124

             total       used       free     shared    buffers     cached
Mem:        512344     506964       5380          0       7228     195912
-/+ buffers/cache:     303824     208520
Swap:      1042428       9624    1032804

             total       used       free     shared    buffers     cached
Mem:        512344     506792       5552          0       7288     192604
-/+ buffers/cache:     306900     205444
Swap:      1042428       9624    1032804

             total       used       free     shared    buffers     cached
Mem:        512344     501424      10920          0       7324     179496
-/+ buffers/cache:     314604     197740
Swap:      1042428       9652    1032776

             total       used       free     shared    buffers     cached
Mem:        512344     503536       8808          0       7348     175848
-/+ buffers/cache:     320340     192004
Swap:      1042428      10368    1032060

             total       used       free     shared    buffers     cached
Mem:        512344     502636       9708          0       7396     171436
-/+ buffers/cache:     323804     188540
Swap:      1042428      10368    1032060

Jakas podpowiedz?

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)