Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2013-01-31 12:33:52

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

[SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Witam

Brat niesteyty sobie zażyczył ubuntu z gnome shell po tym jak zobaczył je u mnie. Po instalacji i krótkiej walce z "black screen" okazało się, że środowosko graficzne uruchamia sie tylko w fallback mode i nie moge tego w żaden sposób zmienić.

Kod:

glxinfo | grep "direct rendering"
direct rendering: Yes

Kod:

glxinfo | grep "direct rendering"
direct rendering: Yes

Kod:

sudo lshw -c video
 description: VGA compatible controller
       product: Mobile 4 Series Chipset Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:45 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:50f0(size=8)

Kod:

uname -r
3.2.0-36-generic

Edit: literówka

Rozwiązanie: po ponownym zainstalowaniu xserver-xorg-video-intel oraz dodaniu do /etc/rc.local

Kod:

sudo setpci -s 00:02.0 F4.B=00

wszystko hula jak trzeba

Ostatnio edytowany przez Bitels (2013-01-31 17:22:33)

Offline

 

#2  2013-01-31 12:51:20

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Ja bym radził nowsze *buntu, ma też nowsze Gnome, i poprawione kilka błędów, które w 12.04 prawdopodobnie poprawione nie będą.

Poza tym Gnome-shell ssie dwa razy bardziej  od Compiza z Emeraldem, i na sterowniku i915 i tej lub starszej  karcie często się wykłada.
Na takim niezłym, ale niezbyt kosmicznym sprzęcie dużo łatwiej dojść do ładu z KDE-4 niż z Gnome-shell, bo KDE4 jest w tej chwili już w miarę stabilnym środowiskiem, a Gshell co chwila ma inne błędy, i co chwila sypie się na innych sterownikach.

Na jakiej karcie chodzi Gshell u Ciebie?

Względnie spróbuj na tym kompie odpalić oficjalny LiveCD z Gnome-shell (np Fedorę) - przygotowany przez deweloperów Gnome,3, będziesz wtedy widział, czy obrobi tą kartę, i przy okazji, czy sytuacja z Ubuntu jest możliwa do naprawienia przez jakieś kombinacje alpejskie czy nowszą wersję.

Sznurek:
http://www.gnome.org/getting-gnome/

Ostatnio edytowany przez Jacekalex (2013-01-31 12:52:12)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#3  2013-01-31 13:16:14

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Hehe u mnie śmiga z na piecyku E8400 z gtx460 4gb ram :P. a u brata niestety laptop eMachines E725 T4200 z gma4500hd 4gb ram. co dziwne po odpaleniu komendy z palca gnome-shell --replace odpala sie tak jak trzeba tylko dlaczego po wybraniu w lightdm uruchamia się fallback? Co do kde to nie lubię i nie specjalnie sie na nim znam (moja kobita ma kde na laptopie i jej sie podoba a ja na niego patrzeć nie moge i jak na niego siadam to odpalam openboxa :P). Co do gnome shell na ubuntu to ja osobiscie sobie chwalę. Czysty gnome shell bez udziwnien i 1000 dodatkow chodzi stabilnie i szybko(oczywiscie nie ma polotu do openboxa + tint2 + conky ale jest bardziej przyjazny ). Wracając do brata to wcześniej próbowalem go przesadzić na xfce ale sie uparł, że chce gnome shell tak wiec jako dobry brat siedze i walczę :P...

Offline

 

#4  2013-01-31 13:17:29

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Poza tym bardziej przydatne wyniki to:

Kod:

glxinfo | egrep -i 'direct|open'

i zawartość Xorg.0.log

Offline

 

#5  2013-01-31 13:26:16

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Przoszę bardzo.

Kod:

glxinfo | egrep -i 'direct|open'
direct rendering: Yes
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300)
OpenGL version string: 2.1 Mesa 8.0.4
OpenGL shading language version string: 1.20
OpenGL extensions:

Kod:

[   103.498] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[   103.498] X Protocol Version 11, Revision 0
[   103.498] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[   103.498] Current Operating System: Linux ubuntu 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64
[   103.498] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-36-generic root=UUID=036a3c6a-b2c2-426f-8551-380458f64c7a ro acpi_osi=
[   103.498] Build Date: 29 August 2012  12:12:33AM
[   103.498] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) 
[   103.498] Current version of pixman: 0.24.4
[   103.498]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   103.498] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   103.498] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 31 12:12:41 2013
[   103.499] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   103.499] (==) No Layout section.  Using the first Screen section.
[   103.499] (==) No screen section available. Using defaults.
[   103.499] (**) |-->Screen "Default Screen Section" (0)
[   103.499] (**) |   |-->Monitor "<default monitor>"
[   103.499] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   103.499] (==) Automatically adding devices
[   103.499] (==) Automatically enabling devices
[   103.499] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   103.499]     Entry deleted from font path.
[   103.499] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   103.499]     Entry deleted from font path.
[   103.499] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   103.499]     Entry deleted from font path.
[   103.499] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   103.499]     Entry deleted from font path.
[   103.499] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   103.499]     Entry deleted from font path.
[   103.499] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   103.499]     Entry deleted from font path.
[   103.499] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[   103.499] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   103.499] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   103.499] (II) Loader magic: 0x7ff5656a4b00
[   103.499] (II) Module ABI versions:
[   103.499]     X.Org ANSI C Emulation: 0.4
[   103.499]     X.Org Video Driver: 11.0
[   103.499]     X.Org XInput driver : 16.0
[   103.499]     X.Org Server Extension : 6.0
[   103.500] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0212 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050f0/8
[   103.500] (--) PCI: (0:0:2:1) 8086:2a43:1025:0212 rev 9, Mem @ 0xd3400000/1048576
[   103.500] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   103.500] (II) LoadModule: "extmod"
[   103.501] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   103.501] (II) Module extmod: vendor="X.Org Foundation"
[   103.501]     compiled for 1.11.3, module version = 1.0.0
[   103.501]     Module class: X.Org Server Extension
[   103.501]     ABI class: X.Org Server Extension, version 6.0
[   103.501] (II) Loading extension MIT-SCREEN-SAVER
[   103.501] (II) Loading extension XFree86-VidModeExtension
[   103.501] (II) Loading extension XFree86-DGA
[   103.501] (II) Loading extension DPMS
[   103.501] (II) Loading extension XVideo
[   103.501] (II) Loading extension XVideo-MotionCompensation
[   103.501] (II) Loading extension X-Resource
[   103.501] (II) LoadModule: "dbe"
[   103.501] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   103.501] (II) Module dbe: vendor="X.Org Foundation"
[   103.501]     compiled for 1.11.3, module version = 1.0.0
[   103.501]     Module class: X.Org Server Extension
[   103.501]     ABI class: X.Org Server Extension, version 6.0
[   103.501] (II) Loading extension DOUBLE-BUFFER
[   103.501] (II) LoadModule: "glx"
[   103.501] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   103.502] (II) Module glx: vendor="X.Org Foundation"
[   103.502]     compiled for 1.11.3, module version = 1.0.0
[   103.502]     ABI class: X.Org Server Extension, version 6.0
[   103.502] (==) AIGLX enabled
[   103.502] (II) Loading extension GLX
[   103.502] (II) LoadModule: "record"
[   103.502] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   103.502] (II) Module record: vendor="X.Org Foundation"
[   103.502]     compiled for 1.11.3, module version = 1.13.0
[   103.502]     Module class: X.Org Server Extension
[   103.502]     ABI class: X.Org Server Extension, version 6.0
[   103.502] (II) Loading extension RECORD
[   103.502] (II) LoadModule: "dri"
[   103.502] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   103.502] (II) Module dri: vendor="X.Org Foundation"
[   103.502]     compiled for 1.11.3, module version = 1.0.0
[   103.502]     ABI class: X.Org Server Extension, version 6.0
[   103.502] (II) Loading extension XFree86-DRI
[   103.502] (II) LoadModule: "dri2"
[   103.503] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   103.503] (II) Module dri2: vendor="X.Org Foundation"
[   103.503]     compiled for 1.11.3, module version = 1.2.0
[   103.503]     ABI class: X.Org Server Extension, version 6.0
[   103.503] (II) Loading extension DRI2
[   103.503] (==) Matched intel as autoconfigured driver 0
[   103.503] (==) Matched vesa as autoconfigured driver 1
[   103.503] (==) Matched fbdev as autoconfigured driver 2
[   103.503] (==) Assigned the driver to the xf86ConfigLayout
[   103.503] (II) LoadModule: "intel"
[   103.503] (WW) Warning, couldn't open module intel
[   103.503] (II) UnloadModule: "intel"
[   103.503] (II) Unloading intel
[   103.503] (EE) Failed to load module "intel" (module does not exist, 0)
[   103.503] (II) LoadModule: "vesa"
[   103.503] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   103.504] (II) Module vesa: vendor="X.Org Foundation"
[   103.504]     compiled for 1.11.3, module version = 2.3.0
[   103.504]     Module class: X.Org Video Driver
[   103.504]     ABI class: X.Org Video Driver, version 11.0
[   103.504] (II) LoadModule: "fbdev"
[   103.504] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   103.504] (II) Module fbdev: vendor="X.Org Foundation"
[   103.504]     compiled for 1.11.3, module version = 0.4.2
[   103.504]     ABI class: X.Org Video Driver, version 11.0
[   103.504] (==) Matched intel as autoconfigured driver 0
[   103.504] (==) Matched vesa as autoconfigured driver 1
[   103.504] (==) Matched fbdev as autoconfigured driver 2
[   103.504] (==) Assigned the driver to the xf86ConfigLayout
[   103.504] (II) LoadModule: "intel"
[   103.504] (WW) Warning, couldn't open module intel
[   103.504] (II) UnloadModule: "intel"
[   103.504] (II) Unloading intel
[   103.504] (EE) Failed to load module "intel" (module does not exist, 0)
[   103.504] (II) LoadModule: "vesa"
[   103.505] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   103.505] (II) Module vesa: vendor="X.Org Foundation"
[   103.505]     compiled for 1.11.3, module version = 2.3.0
[   103.505]     Module class: X.Org Video Driver
[   103.505]     ABI class: X.Org Video Driver, version 11.0
[   103.505] (II) UnloadModule: "vesa"
[   103.505] (II) Unloading vesa
[   103.505] (II) Failed to load module "vesa" (already loaded, 0)
[   103.505] (II) LoadModule: "fbdev"
[   103.505] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   103.505] (II) Module fbdev: vendor="X.Org Foundation"
[   103.505]     compiled for 1.11.3, module version = 0.4.2
[   103.505]     ABI class: X.Org Video Driver, version 11.0
[   103.505] (II) UnloadModule: "fbdev"
[   103.505] (II) Unloading fbdev
[   103.505] (II) Failed to load module "fbdev" (already loaded, 0)
[   103.505] (II) VESA: driver for VESA chipsets: vesa
[   103.505] (II) FBDEV: driver for framebuffer: fbdev
[   103.505] (++) using VT number 7

[   103.505] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   103.505] vesa: Ignoring device with a bound kernel driver
[   103.505] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   103.505] vesa: Ignoring device with a bound kernel driver
[   103.505] (WW) Falling back to old probe method for vesa
[   103.505] (II) Loading sub module "fbdevhw"
[   103.505] (II) LoadModule: "fbdevhw"
[   103.506] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   103.506] (II) Module fbdevhw: vendor="X.Org Foundation"
[   103.506]     compiled for 1.11.3, module version = 0.0.2
[   103.506]     ABI class: X.Org Video Driver, version 11.0
[   103.506] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   103.506] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   103.506] (**) FBDEV(2): claimed PCI slot 0@0:2:0
[   103.506] (II) FBDEV(2): using default device
[   103.506] (II) FBDEV(2): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   103.506] (==) FBDEV(2): Depth 24, (==) framebuffer bpp 32
[   103.506] (==) FBDEV(2): RGB weight 888
[   103.506] (==) FBDEV(2): Default visual is TrueColor
[   103.506] (==) FBDEV(2): Using gamma correction (1.0, 1.0, 1.0)
[   103.506] (II) FBDEV(2): hardware: inteldrmfb (video memory: 4128kB)
[   103.506] (II) FBDEV(2): checking modes against framebuffer device...
[   103.506] (II) FBDEV(2): checking modes against monitor...
[   103.506] (--) FBDEV(2): Virtual size is 1366x768 (pitch 1366)
[   103.506] (**) FBDEV(2):  Built-in mode "current"
[   103.506] (==) FBDEV(2): DPI set to (96, 96)
[   103.506] (II) Loading sub module "fb"
[   103.506] (II) LoadModule: "fb"
[   103.506] (II) Loading /usr/lib/xorg/modules/libfb.so
[   103.506] (II) Module fb: vendor="X.Org Foundation"
[   103.506]     compiled for 1.11.3, module version = 1.0.0
[   103.506]     ABI class: X.Org ANSI C Emulation, version 0.4
[   103.506] (**) FBDEV(2): using shadow framebuffer
[   103.506] (II) Loading sub module "shadow"
[   103.506] (II) LoadModule: "shadow"
[   103.507] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   103.507] (II) Module shadow: vendor="X.Org Foundation"
[   103.507]     compiled for 1.11.3, module version = 1.1.0
[   103.507]     ABI class: X.Org ANSI C Emulation, version 0.4
[   103.507] (II) UnloadModule: "vesa"
[   103.507] (II) Unloading vesa
[   103.507] (II) UnloadModule: "vesa"
[   103.507] (II) Unloading vesa
[   103.507] (==) Depth 24 pixmap format is 32 bpp
[   103.748] (==) FBDEV(0): Backing store disabled
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[   103.751] (==) FBDEV(0): DPMS enabled
[   103.751] (==) RandR enabled
[   103.751] (II) Initializing built-in extension Generic Event Extension
[   103.751] (II) Initializing built-in extension SHAPE
[   103.751] (II) Initializing built-in extension MIT-SHM
[   103.751] (II) Initializing built-in extension XInputExtension
[   103.751] (II) Initializing built-in extension XTEST
[   103.751] (II) Initializing built-in extension BIG-REQUESTS
[   103.751] (II) Initializing built-in extension SYNC
[   103.751] (II) Initializing built-in extension XKEYBOARD
[   103.751] (II) Initializing built-in extension XC-MISC
[   103.751] (II) Initializing built-in extension SECURITY
[   103.751] (II) Initializing built-in extension XINERAMA
[   103.751] (II) Initializing built-in extension XFIXES
[   103.751] (II) Initializing built-in extension RENDER
[   103.751] (II) Initializing built-in extension RANDR
[   103.751] (II) Initializing built-in extension COMPOSITE
[   103.751] (II) Initializing built-in extension DAMAGE
[   103.757] (II) AIGLX: Screen 0 is not DRI2 capable
[   103.757] (II) AIGLX: Screen 0 is not DRI capable
[   103.772] (II) AIGLX: Loaded and initialized swrast
[   103.772] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   103.789] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   103.793] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   103.793] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   103.793] (II) LoadModule: "evdev"
[   103.793] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.793] (II) Module evdev: vendor="X.Org Foundation"
[   103.793]     compiled for 1.11.3, module version = 2.7.0
[   103.793]     Module class: X.Org XInput Driver
[   103.793]     ABI class: X.Org XInput driver, version 16.0
[   103.793] (II) Using input driver 'evdev' for 'Power Button'
[   103.793] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.793] (**) Power Button: always reports core events
[   103.793] (**) evdev: Power Button: Device: "/dev/input/event3"
[   103.793] (--) evdev: Power Button: Vendor 0 Product 0x1
[   103.793] (--) evdev: Power Button: Found keys
[   103.793] (II) evdev: Power Button: Configuring as keyboard
[   103.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   103.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   103.793] (**) Option "xkb_rules" "evdev"
[   103.793] (**) Option "xkb_model" "pc105"
[   103.793] (**) Option "xkb_layout" "pl"
[   103.797] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[   103.798] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   103.799] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   103.799] (II) Using input driver 'evdev' for 'Video Bus'
[   103.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.799] (**) Video Bus: always reports core events
[   103.799] (**) evdev: Video Bus: Device: "/dev/input/event8"
[   103.799] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   103.799] (--) evdev: Video Bus: Found keys
[   103.799] (II) evdev: Video Bus: Configuring as keyboard
[   103.799] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[   103.799] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   103.799] (**) Option "xkb_rules" "evdev"
[   103.799] (**) Option "xkb_model" "pc105"
[   103.799] (**) Option "xkb_layout" "pl"
[   103.799] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   103.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   103.799] (II) Using input driver 'evdev' for 'Power Button'
[   103.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.799] (**) Power Button: always reports core events
[   103.800] (**) evdev: Power Button: Device: "/dev/input/event0"
[   103.800] (--) evdev: Power Button: Vendor 0 Product 0x1
[   103.800] (--) evdev: Power Button: Found keys
[   103.800] (II) evdev: Power Button: Configuring as keyboard
[   103.800] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input0/event0"
[   103.800] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   103.800] (**) Option "xkb_rules" "evdev"
[   103.800] (**) Option "xkb_model" "pc105"
[   103.800] (**) Option "xkb_layout" "pl"
[   103.800] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   103.800] (II) No input driver specified, ignoring this device.
[   103.800] (II) This device may have been added with another device file.
[   103.801] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   103.801] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   103.801] (II) Using input driver 'evdev' for 'Sleep Button'
[   103.801] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.801] (**) Sleep Button: always reports core events
[   103.801] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   103.801] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   103.801] (--) evdev: Sleep Button: Found keys
[   103.801] (II) evdev: Sleep Button: Configuring as keyboard
[   103.801] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input2/event2"
[   103.801] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   103.801] (**) Option "xkb_rules" "evdev"
[   103.801] (**) Option "xkb_model" "pc105"
[   103.801] (**) Option "xkb_layout" "pl"
[   103.802] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[   103.802] (II) No input driver specified, ignoring this device.
[   103.802] (II) This device may have been added with another device file.
[   103.802] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[   103.802] (II) No input driver specified, ignoring this device.
[   103.802] (II) This device may have been added with another device file.
[   103.802] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[   103.802] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   103.802] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   103.802] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.802] (**) Logitech USB Receiver: always reports core events
[   103.802] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[   103.802] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   103.802] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   103.802] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   103.802] (--) evdev: Logitech USB Receiver: Found relative axes
[   103.802] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   103.802] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   103.802] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   103.803] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   103.803] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   103.803] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input5/event5"
[   103.803] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[   103.803] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   103.803] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   103.803] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   103.803] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   103.803] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   103.803] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   103.803] (II) No input driver specified, ignoring this device.
[   103.803] (II) This device may have been added with another device file.
[   103.804] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[   103.804] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   103.804] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   103.804] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.804] (**) Logitech USB Receiver: always reports core events
[   103.804] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[   103.804] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   103.804] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   103.804] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   103.804] (--) evdev: Logitech USB Receiver: Found relative axes
[   103.804] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   103.804] (--) evdev: Logitech USB Receiver: Found absolute axes
[   103.804] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   103.804] (--) evdev: Logitech USB Receiver: Found keys
[   103.804] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   103.804] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   103.804] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   103.804] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   103.804] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   103.804] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input6/event6"
[   103.804] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[   103.804] (**) Option "xkb_rules" "evdev"
[   103.804] (**) Option "xkb_model" "pc105"
[   103.804] (**) Option "xkb_layout" "pl"
[   103.805] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   103.805] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   103.805] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   103.805] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   103.805] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   103.805] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   103.805] (II) config/udev: Adding input device Video WebCam (/dev/input/event7)
[   103.805] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[   103.805] (II) Using input driver 'evdev' for 'Video WebCam'
[   103.805] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.805] (**) Video WebCam: always reports core events
[   103.805] (**) evdev: Video WebCam: Device: "/dev/input/event7"
[   103.806] (--) evdev: Video WebCam: Vendor 0x64e Product 0xa103
[   103.806] (--) evdev: Video WebCam: Found keys
[   103.806] (II) evdev: Video WebCam: Configuring as keyboard
[   103.806] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7/event7"
[   103.806] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD, id 12)
[   103.806] (**) Option "xkb_rules" "evdev"
[   103.806] (**) Option "xkb_model" "pc105"
[   103.806] (**) Option "xkb_layout" "pl"
[   103.806] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   103.806] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   103.806] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   103.806] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.806] (**) AT Translated Set 2 keyboard: always reports core events
[   103.806] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[   103.806] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   103.806] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   103.806] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   103.807] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[   103.807] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   103.807] (**) Option "xkb_rules" "evdev"
[   103.807] (**) Option "xkb_model" "pc105"
[   103.807] (**) Option "xkb_layout" "pl"
[   103.807] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[   103.807] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   103.807] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   103.807] (II) LoadModule: "synaptics"
[   103.808] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   103.808] (II) Module synaptics: vendor="X.Org Foundation"
[   103.808]     compiled for 1.11.3, module version = 1.6.2
[   103.808]     Module class: X.Org XInput Driver
[   103.808]     ABI class: X.Org XInput driver, version 16.0
[   103.808] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   103.808] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   103.808] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   103.808] (**) Option "Device" "/dev/input/event11"
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   103.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   103.828] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[   103.828] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[   103.828] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   103.828] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   103.828] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[   103.828] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   103.828] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   103.828] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   103.828] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   103.828] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   103.829] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   103.829] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   115.631] (II) XKB: reuse xkmfile /var/lib/xkb/server-A08FD83AD8727839541EF8306FA3BE9378B423D0.xkm

Offline

 

#6  2013-01-31 13:30:44

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Nie masz włączonej akceleracji sprzętowej i do tego masz burdel w sterownikach.

Offline

 

#7  2013-01-31 13:37:53

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

No ok a mógł bym prosić o jakiś pomysł jak naprawić ten stan rzeczy?

Offline

 

#8  2013-01-31 13:41:00

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Pokaż co masz zainstalowane:

Kod:

dpkg -l|egrep 'glx|mesa|intel'

i

Kod:

cat /etc/X11/xorg.conf

Offline

 

#9  2013-01-31 13:45:58

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

xorg.conf jak to w ubuntu bywa brak.wygenerować?

Kod:

dpkg -l|egrep 'glx|mesa|intel'
ii  libdrm-intel1                          2.4.39-0ubuntu0.1                       Userspace interface to intel-specific kernel DRM services -- runtime
ii  libdrm-intel1:i386                     2.4.39-0ubuntu0.1                       Userspace interface to intel-specific kernel DRM services -- runtime
ii  libgl1-mesa-dri                        8.0.4-0ubuntu0.3                        free implementation of the OpenGL API -- DRI modules
ii  libgl1-mesa-dri:i386                   8.0.4-0ubuntu0.3                        free implementation of the OpenGL API -- DRI modules
ii  libgl1-mesa-glx                        8.0.4-0ubuntu0.3                        free implementation of the OpenGL API -- GLX runtime
ii  libgl1-mesa-glx:i386                   8.0.4-0ubuntu0.3                        free implementation of the OpenGL API -- GLX runtime
ii  libglapi-mesa                          8.0.4-0ubuntu0.3                        free implementation of the GL API -- shared library
ii  libglapi-mesa:i386                     8.0.4-0ubuntu0.3                        free implementation of the GL API -- shared library
ii  libglu1-mesa                           8.0.4-0ubuntu0.3                        Mesa OpenGL utility library (GLU)
ii  libglu1-mesa:i386                      8.0.4-0ubuntu0.3                        Mesa OpenGL utility library (GLU)
ii  libosmesa6                             8.0.4-0ubuntu0.3                        Mesa Off-screen rendering extension
ii  libosmesa6:i386                        8.0.4-0ubuntu0.3                        Mesa Off-screen rendering extension
ii  libxcb-glx0                            1.8.1-1ubuntu0.1                        X C Binding, glx extension
ii  libxcb-glx0:i386                       1.8.1-1ubuntu0.1                        X C Binding, glx extension
ii  mesa-utils                             8.0.1+git20110129+d8f7d6b-0ubuntu2      Miscellaneous Mesa GL utilities

Offline

 

#10  2013-01-31 13:48:12

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

A gdzie masz xserver-xorg-video-intel?

Pliku xorg.conf ma nie być.

Ostatnio edytowany przez yossarian (2013-01-31 13:49:35)

Offline

 

#11  2013-01-31 13:51:02

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

odinstalowałem... jak był zainstalowany miałem czarny ekran...

Offline

 

#12  2013-01-31 13:54:17

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Bitels napisał(-a):

odinstalowałem... jak był zainstalowany miałem czarny ekran...

:)

No to co się dziwisz że Ci GNOME nie trybi?

Offline

 

#13  2013-01-31 14:18:36

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

hehe no dobra zainstalowalem i mam czarny ekran... znowu... jedyna opcja to crl+alt+f1 a następnie crl+alt+del i przy uruchomieniu wpisanie w grub "nomodeset" ale wtedy chyba wlasnie nie odpala sie na sterownikach intela?

Offline

 

#14  2013-01-31 14:22:52

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Wrzuć loga z tego podniesienia kończącego się czarnym ekranem.

Offline

 

#15  2013-01-31 14:25:36

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

tylko jak... nie moge nic zrobić... w konsoli też czarny ekran... boot z live cd i wkleić loga?

Offline

 

#16  2013-01-31 14:28:23

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

co dziwne po odpaleniu komendy z palca gnome-shell --replace odpala sie tak jak trzeba tylko dlaczego po wybraniu w lightdm uruchamia się fallback?

Nie mogłeś tego od razu napisać?
xserver-xorg-video-intel rzeczywiście by się przydał, ale z drugiej strony od roku słyszę, jak się miłośnicy ziółek z teamu Gnome się  chwalą, że Shell i Mutter działają na Gallium i llvmpipe, nawet z tej okazji wywalili w ogóle tryb fallback
z nowego Gnome - podobno w przeciwieństwie do NM i PA, nie był już potrzebny ;)

Widać przy tym, że problemem nie jest Gnome-Shell, tylko Lightdm jest walnięty, - nie podnosi Gshell jak trzeba.

Jak koniecznie musi być ta wersja *buntu, to ja bym spróbował wywalić LightDM
i wsadzić w jego miejsce GDM3 - ten przynajmniej powinien obsługiwać Gnome normalnie ( w Wheezym nie było z tym problemu).

Względnie, jakby nic innego nie pomogło, zamiast managera logowania można poodnosić system automatycznie z konsoli albo przez jakiś  konsolowy manager logowania,  i niech Xorg podnosi Gshell z ~/.xinitrc..

To też jest jakieś rozwiązanie.

Pozdrawiam
;-)

Ostatnio edytowany przez Jacekalex (2013-01-31 15:34:42)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#17  2013-01-31 14:29:20

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Albo restart i odpalenie z nomodeset jak pisałeś. Log z poprzedniego uruchomienia powinien być wtedy jako Xorg.0.log.old (jeśli się zapisał w ogóle).

Offline

 

#18  2013-01-31 14:30:48

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

@Jacekalex:
Ale to chyba w nowszych GNOME. Nie wiem jaki jest w Ubuntu, a tym bardziej jak tam działa ;)

Zresztą to i tak bez sensu w tym przypadku bo na tej karcie ma działać zwykła akceleracja.

Ostatnio edytowany przez yossarian (2013-01-31 14:31:20)

Offline

 

#19  2013-01-31 14:40:12

  Bitels - Użytkownik

Bitels
Użytkownik
Zarejestrowany: 2012-10-31

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

ok zrobiłem jak Arn polecał. Pytanie co dalej?

Kod:

[    15.817] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    15.817] X Protocol Version 11, Revision 0
[    15.817] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[    15.817] Current Operating System: Linux ubuntu 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64
[    15.817] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-36-generic root=UUID=036a3c6a-b2c2-426f-8551-380458f64c7a ro acpi_osi=
[    15.817] Build Date: 29 August 2012  12:12:33AM
[    15.817] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) 
[    15.817] Current version of pixman: 0.24.4
[    15.817]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    15.817] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.817] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 31 14:33:35 2013
[    15.825] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.826] (==) No Layout section.  Using the first Screen section.
[    15.826] (==) No screen section available. Using defaults.
[    15.826] (**) |-->Screen "Default Screen Section" (0)
[    15.826] (**) |   |-->Monitor "<default monitor>"
[    15.826] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    15.826] (==) Automatically adding devices
[    15.826] (==) Automatically enabling devices
[    15.826] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.826]     Entry deleted from font path.
[    15.826] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.826]     Entry deleted from font path.
[    15.826] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.826]     Entry deleted from font path.
[    15.826] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.826]     Entry deleted from font path.
[    15.826] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.826]     Entry deleted from font path.
[    15.826] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    15.826]     Entry deleted from font path.
[    15.826] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    15.826] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    15.826] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.826] (II) Loader magic: 0x7f4d15c9eb00
[    15.826] (II) Module ABI versions:
[    15.826]     X.Org ANSI C Emulation: 0.4
[    15.826]     X.Org Video Driver: 11.0
[    15.826]     X.Org XInput driver : 16.0
[    15.826]     X.Org Server Extension : 6.0
[    15.827] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0212 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050f0/8
[    15.827] (--) PCI: (0:0:2:1) 8086:2a43:1025:0212 rev 9, Mem @ 0xd3400000/1048576
[    15.827] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.827] (II) LoadModule: "extmod"
[    15.830] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.830] (II) Module extmod: vendor="X.Org Foundation"
[    15.830]     compiled for 1.11.3, module version = 1.0.0
[    15.830]     Module class: X.Org Server Extension
[    15.830]     ABI class: X.Org Server Extension, version 6.0
[    15.830] (II) Loading extension MIT-SCREEN-SAVER
[    15.830] (II) Loading extension XFree86-VidModeExtension
[    15.830] (II) Loading extension XFree86-DGA
[    15.830] (II) Loading extension DPMS
[    15.830] (II) Loading extension XVideo
[    15.830] (II) Loading extension XVideo-MotionCompensation
[    15.830] (II) Loading extension X-Resource
[    15.830] (II) LoadModule: "dbe"
[    15.830] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.830] (II) Module dbe: vendor="X.Org Foundation"
[    15.830]     compiled for 1.11.3, module version = 1.0.0
[    15.830]     Module class: X.Org Server Extension
[    15.830]     ABI class: X.Org Server Extension, version 6.0
[    15.830] (II) Loading extension DOUBLE-BUFFER
[    15.830] (II) LoadModule: "glx"
[    15.831] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.831] (II) Module glx: vendor="X.Org Foundation"
[    15.831]     compiled for 1.11.3, module version = 1.0.0
[    15.831]     ABI class: X.Org Server Extension, version 6.0
[    15.831] (==) AIGLX enabled
[    15.831] (II) Loading extension GLX
[    15.831] (II) LoadModule: "record"
[    15.831] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    15.831] (II) Module record: vendor="X.Org Foundation"
[    15.831]     compiled for 1.11.3, module version = 1.13.0
[    15.831]     Module class: X.Org Server Extension
[    15.831]     ABI class: X.Org Server Extension, version 6.0
[    15.831] (II) Loading extension RECORD
[    15.831] (II) LoadModule: "dri"
[    15.831] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    15.832] (II) Module dri: vendor="X.Org Foundation"
[    15.832]     compiled for 1.11.3, module version = 1.0.0
[    15.832]     ABI class: X.Org Server Extension, version 6.0
[    15.832] (II) Loading extension XFree86-DRI
[    15.832] (II) LoadModule: "dri2"
[    15.832] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    15.832] (II) Module dri2: vendor="X.Org Foundation"
[    15.832]     compiled for 1.11.3, module version = 1.2.0
[    15.832]     ABI class: X.Org Server Extension, version 6.0
[    15.832] (II) Loading extension DRI2
[    15.832] (==) Matched intel as autoconfigured driver 0
[    15.832] (==) Matched vesa as autoconfigured driver 1
[    15.832] (==) Matched fbdev as autoconfigured driver 2
[    15.832] (==) Assigned the driver to the xf86ConfigLayout
[    15.832] (II) LoadModule: "intel"
[    15.832] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.848] (II) Module intel: vendor="X.Org Foundation"
[    15.848]     compiled for 1.11.3, module version = 2.17.0
[    15.848]     Module class: X.Org Video Driver
[    15.848]     ABI class: X.Org Video Driver, version 11.0
[    15.848] (II) LoadModule: "vesa"
[    15.848] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.848] (II) Module vesa: vendor="X.Org Foundation"
[    15.848]     compiled for 1.11.3, module version = 2.3.0
[    15.848]     Module class: X.Org Video Driver
[    15.848]     ABI class: X.Org Video Driver, version 11.0
[    15.848] (II) LoadModule: "fbdev"
[    15.862] (WW) Warning, couldn't open module fbdev
[    15.862] (II) UnloadModule: "fbdev"
[    15.862] (II) Unloading fbdev
[    15.862] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    15.862] (==) Matched intel as autoconfigured driver 0
[    15.862] (==) Matched vesa as autoconfigured driver 1
[    15.862] (==) Matched fbdev as autoconfigured driver 2
[    15.862] (==) Assigned the driver to the xf86ConfigLayout
[    15.863] (II) LoadModule: "intel"
[    15.863] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.863] (II) Module intel: vendor="X.Org Foundation"
[    15.863]     compiled for 1.11.3, module version = 2.17.0
[    15.863]     Module class: X.Org Video Driver
[    15.863]     ABI class: X.Org Video Driver, version 11.0
[    15.863] (II) UnloadModule: "intel"
[    15.863] (II) Unloading intel
[    15.863] (II) Failed to load module "intel" (already loaded, 32589)
[    15.863] (II) LoadModule: "vesa"
[    15.863] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.863] (II) Module vesa: vendor="X.Org Foundation"
[    15.863]     compiled for 1.11.3, module version = 2.3.0
[    15.863]     Module class: X.Org Video Driver
[    15.863]     ABI class: X.Org Video Driver, version 11.0
[    15.863] (II) UnloadModule: "vesa"
[    15.863] (II) Unloading vesa
[    15.863] (II) Failed to load module "vesa" (already loaded, 32589)
[    15.863] (II) LoadModule: "fbdev"
[    15.863] (WW) Warning, couldn't open module fbdev
[    15.863] (II) UnloadModule: "fbdev"
[    15.863] (II) Unloading fbdev
[    15.864] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    15.864] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    15.864] (II) VESA: driver for VESA chipsets: vesa
[    15.864] (++) using VT number 7

[    15.866] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.866] (WW) Falling back to old probe method for vesa
[    15.866] drmOpenDevice: node name is /dev/dri/card0
[    15.866] drmOpenDevice: open result is 8, (OK)
[    15.866] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    15.866] drmOpenDevice: node name is /dev/dri/card0
[    15.866] drmOpenDevice: open result is 8, (OK)
[    15.867] drmOpenByBusid: drmOpenMinor returns 8
[    15.867] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    15.867] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    15.867] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    15.867] (==) intel(0): RGB weight 888
[    15.867] (==) intel(0): Default visual is TrueColor
[    15.867] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    15.867] (--) intel(0): Chipset: "GM45"
[    15.867] (**) intel(0): Relaxed fencing enabled
[    15.867] (**) intel(0): Wait on SwapBuffers? enabled
[    15.867] (**) intel(0): Triple buffering? enabled
[    15.867] (**) intel(0): Framebuffer tiled
[    15.867] (**) intel(0): Pixmaps tiled
[    15.867] (**) intel(0): 3D buffers tiled
[    15.867] (**) intel(0): SwapBuffers wait enabled
[    15.867] (==) intel(0): video overlay key set to 0x101fe
[    15.867] (II) intel(0): Output LVDS1 has no monitor section
[    15.964] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    15.980] (II) intel(0): Output VGA1 has no monitor section
[    16.028] (II) intel(0): Output DP1 has no monitor section
[    16.028] (II) intel(0): EDID for output LVDS1
[    16.028] (II) intel(0): Manufacturer: SEC  Model: 3046  Serial#: 0
[    16.028] (II) intel(0): Year: 2008  Week: 0
[    16.028] (II) intel(0): EDID Version: 1.3
[    16.028] (II) intel(0): Digital Display Input
[    16.028] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    16.028] (II) intel(0): Gamma: 2.20
[    16.028] (II) intel(0): No DPMS capabilities specified
[    16.028] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.028] (II) intel(0): First detailed timing is preferred mode
[    16.028] (II) intel(0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[    16.028] (II) intel(0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[    16.028] (II) intel(0): Manufacturer's mask: 0
[    16.028] (II) intel(0): Supported detailed timing:
[    16.028] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 193 mm
[    16.028] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    16.028] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    16.028] (II) intel(0): Unknown vendor-specific block f
[    16.028] (II) intel(0):  SAMSUNG
[    16.028] (II) intel(0):  156AT01-A01
[    16.028] (II) intel(0): EDID (in hex):
[    16.028] (II) intel(0):     00ffffffffffff004ca3463000000000
[    16.028] (II) intel(0):     00120103802213780ace859e5b4c9426
[    16.028] (II) intel(0):     17505400000001010101010101010101
[    16.028] (II) intel(0):     010101010101411c56a0500016303020
[    16.028] (II) intel(0):     250058c1100000190000000f00000000
[    16.028] (II) intel(0):     00000000001eb4027400000000fe0053
[    16.028] (II) intel(0):     414d53554e470a2020202020000000fe
[    16.028] (II) intel(0):     00313536415430312d4130310a2000f1
[    16.028] (II) intel(0): EDID vendor "SEC", prod id 12358
[    16.028] (II) intel(0): Printing DDC gathered Modelines:
[    16.028] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    16.028] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    16.028] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.028] (II) intel(0): Printing probed modes for output LVDS1
[    16.029] (II) intel(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    16.029] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    16.029] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    16.029] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    16.029] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    16.029] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    16.029] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    16.044] (II) intel(0): EDID for output VGA1
[    16.092] (II) intel(0): EDID for output DP1
[    16.092] (II) intel(0): Output LVDS1 connected
[    16.092] (II) intel(0): Output VGA1 disconnected
[    16.092] (II) intel(0): Output DP1 disconnected
[    16.092] (II) intel(0): Using exact sizes for initial modes
[    16.092] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    16.092] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.092] (II) intel(0): Kernel page flipping support detected, enabling
[    16.092] (**) intel(0): Display dimensions: (340, 190) mm
[    16.092] (**) intel(0): DPI set to (102, 102)
[    16.092] (II) Loading sub module "fb"
[    16.092] (II) LoadModule: "fb"
[    16.092] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.092] (II) Module fb: vendor="X.Org Foundation"
[    16.092]     compiled for 1.11.3, module version = 1.0.0
[    16.092]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.092] (II) Loading sub module "dri2"
[    16.092] (II) LoadModule: "dri2"
[    16.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.092] (II) Module dri2: vendor="X.Org Foundation"
[    16.092]     compiled for 1.11.3, module version = 1.2.0
[    16.092]     ABI class: X.Org Server Extension, version 6.0
[    16.092] (II) UnloadModule: "vesa"
[    16.092] (II) Unloading vesa
[    16.092] (==) Depth 24 pixmap format is 32 bpp
[    16.092] (II) intel(0): [DRI2] Setup complete
[    16.092] (II) intel(0): [DRI2]   DRI driver: i965
[    16.093] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    16.103] (II) UXA(0): Driver registered support for the following operations:
[    16.103] (II)         solid
[    16.103] (II)         copy
[    16.103] (II)         composite (RENDER acceleration)
[    16.103] (II)         put_image
[    16.103] (II)         get_image
[    16.103] (==) intel(0): Backing store disabled
[    16.103] (==) intel(0): Silken mouse enabled
[    16.104] (II) intel(0): Initializing HW Cursor
[    16.124] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.125] (==) intel(0): DPMS enabled
[    16.125] (==) intel(0): Intel XvMC decoder enabled
[    16.126] (II) intel(0): Set up textured video
[    16.126] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    16.126] (II) intel(0): direct rendering: DRI2 Enabled
[    16.126] (==) intel(0): hotplug detection: "enabled"
[    16.126] (--) RandR disabled
[    16.126] (II) Initializing built-in extension Generic Event Extension
[    16.126] (II) Initializing built-in extension SHAPE
[    16.126] (II) Initializing built-in extension MIT-SHM
[    16.126] (II) Initializing built-in extension XInputExtension
[    16.126] (II) Initializing built-in extension XTEST
[    16.126] (II) Initializing built-in extension BIG-REQUESTS
[    16.126] (II) Initializing built-in extension SYNC
[    16.126] (II) Initializing built-in extension XKEYBOARD
[    16.126] (II) Initializing built-in extension XC-MISC
[    16.126] (II) Initializing built-in extension SECURITY
[    16.126] (II) Initializing built-in extension XINERAMA
[    16.126] (II) Initializing built-in extension XFIXES
[    16.126] (II) Initializing built-in extension RENDER
[    16.126] (II) Initializing built-in extension RANDR
[    16.126] (II) Initializing built-in extension COMPOSITE
[    16.126] (II) Initializing built-in extension DAMAGE
[    16.164] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    16.164] (II) AIGLX: enabled GLX_INTEL_swap_event
[    16.164] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    16.164] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    16.164] (II) AIGLX: Loaded and initialized i965
[    16.164] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.164] (II) intel(0): Setting screen physical size to 361 x 203
[    16.186] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    16.189] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    16.189] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.189] (II) LoadModule: "evdev"
[    16.189] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.190] (II) Module evdev: vendor="X.Org Foundation"
[    16.190]     compiled for 1.11.3, module version = 2.7.0
[    16.190]     Module class: X.Org XInput Driver
[    16.190]     ABI class: X.Org XInput driver, version 16.0
[    16.190] (II) Using input driver 'evdev' for 'Power Button'
[    16.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.190] (**) Power Button: always reports core events
[    16.190] (**) evdev: Power Button: Device: "/dev/input/event3"
[    16.190] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.190] (--) evdev: Power Button: Found keys
[    16.190] (II) evdev: Power Button: Configuring as keyboard
[    16.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    16.190] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.190] (**) Option "xkb_rules" "evdev"
[    16.190] (**) Option "xkb_model" "pc105"
[    16.190] (**) Option "xkb_layout" "pl"
[    16.192] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[    16.193] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    16.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.193] (II) Using input driver 'evdev' for 'Video Bus'
[    16.193] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.193] (**) Video Bus: always reports core events
[    16.193] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    16.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    16.193] (--) evdev: Video Bus: Found keys
[    16.193] (II) evdev: Video Bus: Configuring as keyboard
[    16.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[    16.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    16.193] (**) Option "xkb_rules" "evdev"
[    16.193] (**) Option "xkb_model" "pc105"
[    16.193] (**) Option "xkb_layout" "pl"
[    16.194] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.194] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.194] (II) Using input driver 'evdev' for 'Power Button'
[    16.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.194] (**) Power Button: always reports core events
[    16.194] (**) evdev: Power Button: Device: "/dev/input/event0"
[    16.194] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.194] (--) evdev: Power Button: Found keys
[    16.194] (II) evdev: Power Button: Configuring as keyboard
[    16.194] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input0/event0"
[    16.194] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    16.194] (**) Option "xkb_rules" "evdev"
[    16.194] (**) Option "xkb_model" "pc105"
[    16.194] (**) Option "xkb_layout" "pl"
[    16.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    16.195] (II) No input driver specified, ignoring this device.
[    16.195] (II) This device may have been added with another device file.
[    16.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    16.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    16.195] (II) Using input driver 'evdev' for 'Sleep Button'
[    16.195] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.195] (**) Sleep Button: always reports core events
[    16.195] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    16.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    16.195] (--) evdev: Sleep Button: Found keys
[    16.195] (II) evdev: Sleep Button: Configuring as keyboard
[    16.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input2/event2"
[    16.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    16.195] (**) Option "xkb_rules" "evdev"
[    16.195] (**) Option "xkb_model" "pc105"
[    16.195] (**) Option "xkb_layout" "pl"
[    16.196] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    16.196] (II) No input driver specified, ignoring this device.
[    16.196] (II) This device may have been added with another device file.
[    16.196] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    16.196] (II) No input driver specified, ignoring this device.
[    16.196] (II) This device may have been added with another device file.
[    16.197] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    16.197] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    16.197] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    16.197] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.197] (**) Logitech USB Receiver: always reports core events
[    16.197] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[    16.197] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    16.197] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    16.197] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    16.197] (--) evdev: Logitech USB Receiver: Found relative axes
[    16.197] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    16.197] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    16.197] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    16.197] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    16.197] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input5/event5"
[    16.197] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[    16.197] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    16.197] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    16.197] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    16.197] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    16.197] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    16.198] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    16.198] (II) No input driver specified, ignoring this device.
[    16.198] (II) This device may have been added with another device file.
[    16.198] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[    16.198] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    16.198] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    16.198] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.198] (**) Logitech USB Receiver: always reports core events
[    16.198] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[    16.198] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    16.198] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    16.198] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    16.198] (--) evdev: Logitech USB Receiver: Found relative axes
[    16.198] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    16.198] (--) evdev: Logitech USB Receiver: Found absolute axes
[    16.198] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    16.198] (--) evdev: Logitech USB Receiver: Found keys
[    16.198] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    16.198] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    16.198] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    16.198] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    16.198] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input6/event6"
[    16.199] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    16.199] (**) Option "xkb_rules" "evdev"
[    16.199] (**) Option "xkb_model" "pc105"
[    16.199] (**) Option "xkb_layout" "pl"
[    16.199] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    16.199] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    16.199] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    16.199] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    16.199] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    16.199] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    16.199] (II) config/udev: Adding input device Video WebCam (/dev/input/event7)
[    16.200] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[    16.200] (II) Using input driver 'evdev' for 'Video WebCam'
[    16.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.200] (**) Video WebCam: always reports core events
[    16.200] (**) evdev: Video WebCam: Device: "/dev/input/event7"
[    16.200] (--) evdev: Video WebCam: Vendor 0x64e Product 0xa103
[    16.200] (--) evdev: Video WebCam: Found keys
[    16.200] (II) evdev: Video WebCam: Configuring as keyboard
[    16.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7/event7"
[    16.200] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD, id 12)
[    16.200] (**) Option "xkb_rules" "evdev"
[    16.200] (**) Option "xkb_model" "pc105"
[    16.200] (**) Option "xkb_layout" "pl"
[    16.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    16.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.201] (**) AT Translated Set 2 keyboard: always reports core events
[    16.201] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    16.201] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    16.201] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    16.201] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    16.201] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    16.201] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    16.201] (**) Option "xkb_rules" "evdev"
[    16.201] (**) Option "xkb_model" "pc105"
[    16.201] (**) Option "xkb_layout" "pl"
[    16.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    16.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    16.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    16.201] (II) LoadModule: "synaptics"
[    16.202] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    16.202] (II) Module synaptics: vendor="X.Org Foundation"
[    16.202]     compiled for 1.11.3, module version = 1.6.2
[    16.202]     Module class: X.Org XInput Driver
[    16.202]     ABI class: X.Org XInput driver, version 16.0
[    16.202] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    16.202] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    16.202] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    16.202] (**) Option "Device" "/dev/input/event11"
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    16.204] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    16.212] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    16.212] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    16.212] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    16.212] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    16.212] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[    16.212] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    16.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    16.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    16.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    16.212] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    16.212] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    16.212] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    16.750] (II) intel(0): EDID vendor "SEC", prod id 12358
[    16.750] (II) intel(0): Printing DDC gathered Modelines:
[    16.750] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    20.318] (II) intel(0): EDID vendor "SEC", prod id 12358
[    20.318] (II) intel(0): Printing DDC gathered Modelines:
[    20.318] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    94.916] (II) AIGLX: Suspending AIGLX clients for VT switch
[   100.534] (II) UnloadModule: "synaptics"
[   100.534] (II) Unloading synaptics
[   100.534] (II) evdev: AT Translated Set 2 keyboard: Close
[   100.534] (II) UnloadModule: "evdev"
[   100.534] (II) Unloading evdev
[   100.534] (II) evdev: Video WebCam: Close
[   100.534] (II) UnloadModule: "evdev"
[   100.534] (II) Unloading evdev
[   100.534] (II) evdev: Logitech USB Receiver: Close
[   100.534] (II) UnloadModule: "evdev"
[   100.534] (II) Unloading evdev
[   100.534] (II) evdev: Logitech USB Receiver: Close
[   100.534] (II) UnloadModule: "evdev"
[   100.534] (II) Unloading evdev
[   100.535] (II) evdev: Sleep Button: Close
[   100.535] (II) UnloadModule: "evdev"
[   100.535] (II) Unloading evdev
[   100.535] (II) evdev: Power Button: Close
[   100.535] (II) UnloadModule: "evdev"
[   100.535] (II) Unloading evdev
[   100.535] (II) evdev: Video Bus: Close
[   100.535] (II) UnloadModule: "evdev"
[   100.535] (II) Unloading evdev
[   100.535] (II) evdev: Power Button: Close
[   100.535] (II) UnloadModule: "evdev"
[   100.535] (II) Unloading evdev
[   100.553]  ddxSigGiveUp: Closing log
[   100.553] Server terminated successfully (0). Closing log file.

Offline

 

#20  2013-01-31 14:46:08

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Ja natomiast wiem, jaki "udany" jest Ubuntu-12.04, co widać choćby przy zainstalowanym xorg-video-intel, i pod Gnome-3 brałbym najświeższą możliwą stabilną wersję systemu i Gnome.

Zwłaszcza, że mamy tu typowo "buntowy" folklor Xorga:

[   103.498] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu

W tym jaju była zupełnie inna wersja KMSu i sterów niż w tym:

[   103.498] Current Operating System: Linux ubuntu 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64

To może tłumaczyć kłopoty z KMSem i Intelem.
Pomiędzy 2.6.42 a 3.2 było kila małych "rewolucji" w podsystemie graficznym kernela, KMS  i sterach Intela.

Ostatnio edytowany przez Jacekalex (2013-01-31 15:08:16)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#21  2013-01-31 14:53:24

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

2.6.42 to 3.2 gdyby lecieć według starej numeracji. :) Zamiast 2.6.40 mieliśmy już 3.0.

Offline

 

#22  2013-01-31 14:55:36

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Ale jednak jakaś egzotyka z tym jest w logu z ubuntu ;)

To dobry pretekst do sprawdzenia na jakimś normalnym Linuksie.

Ostatnio edytowany przez yossarian (2013-01-31 14:56:16)

Offline

 

#23  2013-01-31 15:00:07

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

No fakt, ciekawe dlaczego 2.6.42 a nie 3.2. :) Z drugiej strony kernel maszyny na której został zbudowany ma jakieś szczególne znaczenie? W Debianie widywałem w logach przypadki gdy Xorg z danej wersji zbudowany został na kernelu z innej.

Offline

 

#24  2013-01-31 15:07:23

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Może zobacz jeszcze na jakimś Fluxboxie. Teoretycznie nie powinno mieć znaczenia, ale ja tam nic nie widzę w tym logu.
I spróbuj przeładować lightdm:

Kod:

sudo service lightdm stop
sudo service lightdm start

czy jak się to tam przełącza.

PS Mniej czasu zajmuje instalacja jakiegoś Debiana niż ciągłe naprawianie niedoróbek w Ubuntu.

Ostatnio edytowany przez yossarian (2013-01-31 15:11:37)

Offline

 

#25  2013-01-31 15:17:16

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/random
Zarejestrowany: 2008-01-07

Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode

Dla mnie dystrybucja, w której xserver-xorg-video-intel nie wstaje przy włączonym KMS w jaju, już byłaby uzasadnieniem, żeby sprawdzić innego.

Można oczywiście wyłączyć KMS, i ustawić ster Intela w xorg.conf, to jest jakieś wyjście i powinno działać, ale to w końcu ma być łatwy system dla początkujących
a nie jakiś LFS, żeby w nim grzebać. ;)
W dodatku karta Intel 4500HD, to nie jest jakiś niszowy produkt, który wyprodukowano w 50 egzemplarzach, i producent nie blokuje sterów na Linuxa, tylko udostępnia pełne API i stery.


ArnVaker napisał(-a):

No fakt, ciekawe dlaczego 2.6.42 a nie 3.2. :) Z drugiej strony kernel maszyny na której został zbudowany ma jakieś szczególne znaczenie? W Debianie widywałem w logach przypadki gdy Xorg z danej wersji zbudowany został na kernelu z innej.

2.6.42 to byłby raczej 3.0.2.

Natomiast w 3.2 ster Intela do KMS był praktycznie przepisany od zera, jak dodali obsługę zintegrowanych chipów Sandy (czy Ivy?).
Także przeważnie problemu nie ma, ale tutaj owszem, jest.
Gdyby dali w tym *buntu Xorga i ster Intela 1.11.4 budowanego na systemie z jajem 3.2, i sterem załadowanym z KMS, to raczej by działało bez problemu.
Tak samo, jak np w Debianie. ;-)

Pozdrawiam
;-)

Ostatnio edytowany przez Jacekalex (2013-01-31 15:30:52)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)