Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2011-02-15 13:21:02

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Stabilny squeeze i nvidia

Zainstalowalem dzis stabilna wersje squeeze. Wywala mi wszystko zaraz po uruchomieniu grub'a.
Prawdopodobnie to z powodu braku sterownikow Nvidia. Jak je mozna zainstalowac, jak jedyne co mam dostepne to wiersz polecen grub
Poprzednio na moim sprzecie squeeze testowy dzialal doskonale....

ps. przepraszam za brak "ogonkow" w tekscie , ale slax pod ktorym to pisze nie ma takiej opcji....


...slowly and steady wins the race...

Offline

 

#2  2011-02-15 13:26:32

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

Dino_saur napisał(-a):

Wywala mi wszystko zaraz po uruchomieniu grub'a.

Mógłbyś rozwinąć? W single-mode się uruchamia?

Offline

 

#3  2011-02-15 13:27:20

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Stabilny squeeze i nvidia

Dino_saur napisał(-a):

Zainstalowalem dzis stabilna wersje squeeze. Wywala mi wszystko zaraz po uruchomieniu grub'a.
Prawdopodobnie to z powodu braku sterownikow Nvidia

Niet.
Do gdma powinno dojść.

To nie to .

Logo logi logi....


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#4  2011-02-15 13:29:47

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

Po uruchomieniu odpala grub z trzema opcjami. Trzecia to windows - ta dziala...
Pierwsza to debian
druga to jw - recovery mode.
Czy wybieram pierwsza czy druga system po paru sekundach calkowicie wisi - monitor informuje o braku sygnalu.


...slowly and steady wins the race...

Offline

 

#5  2011-02-15 13:31:22

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

Spróbuj z poziomu gruba wyedytować linię kernela i dopisać w niej:

Kod:

nouveau.modeset=0

Offline

 

#6  2011-02-15 14:35:04

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

ArnVaker napisał(-a):

Spróbuj z poziomu gruba wyedytować linię kernela i dopisać w niej:

Kod:

nouveau.modeset=0

To chyba za wysokie progi dla mnie :(
Przejrzalem wszystko co znalazlem na powyzszy temat i dalej nie mam pojecia co zrobic..... :((((
Kocham debiana, ale odnosze wrazenie , ze im bardziej sie rozwija tym mniej przyjazny dla takich jak ja - zwyklych uzytkownikow. A szkoda....
Na razie sprobuje zglebic grub'a - moze znajde rozwiazanie trudnosci. Niemniej jednak kazda pomoc baaardzo mile widziana.


...slowly and steady wins the race...

Offline

 

#7  2011-02-15 15:32:54

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

A tam opowiadasz, to wcale nie jest takie trudne. :) Nie mam grub2, także napiszę tylko opierając się na >> tym <<.

* Najeżdżasz na linijkę uruchamiającą Debiana, jednak zamiast enter wciskasz "e"
* Zjeżdżasz w dół do linijki w stylu:

Kod:

    linux    /vmlinuz-2.6.32-zen7-amidala root=/dev/sda6 rootfstype=ext4 vga=795 quiet

(u Ciebie będzie trochę inna, ale chodzi o tą zaczynającą się słowem linux i zawierającą vmlinuz)

* Na końcu tej linijki dopisujesz:

Kod:

nouveau.modeset=0

* Uruchamiasz system z tym wpisem wciskając ctrl + x

Jeżeli coś napisałem nie tak, to dajcie znać... Pisałem w ciemno. ;)

==========

Ewentualnie można próbować to dopisać czy też od razu blacklistować nouveau w chroocie, ale wydawało mi się, że tak będzie szybciej. Poza tym na dobrą sprawę wcale nie ma pewności, że to pomoże... póki co to tylko domysły.

Offline

 

#8  2011-02-15 16:21:22

  P@blo - Nadworny matematyk

P@blo
Nadworny matematyk
Skąd: Wrocław v Jasło
Zarejestrowany: 2010-11-11

Re: Stabilny squeeze i nvidia

Z tego co pamiętam to dokładnie jak napisałeś :)


ThinkPadX220i
| Procesor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz |
|  Debian: sid   |   Arch: amd64   |   Sound: alsa   |
| No DE | WM: DWM  |  DM: .bash_profile  |  BIOS+MBR |

Offline

 

#9  2011-02-15 19:00:25

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

ArnVaker napisał(-a):

Poza tym na dobrą sprawę wcale nie ma pewności, że to pomoże... póki co to tylko domysły.

Pomogło!!!
Wszystko działa jak należy, wielkie dzięki Arn :))))
A wracając do mojego wcześniejszego postu, to może nie debian mniej przyjazny tylko moje szare komórki zdrętwiały :D

I jeszcze jedno pytanie - jak można sprawdzić czy instalator zainstalował sterownik do nvidii? Sądząc po jakości obrazu - myślę że tak....


...slowly and steady wins the race...

Offline

 

#10  2011-02-15 19:02:41

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Stabilny squeeze i nvidia

Sadzę ,że nie.
Instalator nvidii nie instaluje.

Jak zablokowałeś nouveau to chyba chodzi na nv.

Pokaż

Kod:

lsmod

to zobaczymy co w jądrze siedzi.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#11  2011-02-15 19:05:57

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

Hehe, to jeszcze nie koniec, ale jesteśmy na dobrej drodze. :)

Teraz musisz dodać:

Kod:

blacklist nouveau

do pliku /etc/modprobe.d/blacklist.conf i odświeżyć initrd:

Kod:

update-initramfs -u -k `uname -r`

Po tym powinien uruchamiać się normalnie bez tamtego parametru... Następna w kolejności instalacja sterów Nvidii.

Offline

 

#12  2011-02-15 19:08:43

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Stabilny squeeze i nvidia

Jeśli zainstaluje stery z repo to nie musi tego robić.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#13  2011-02-16 03:27:57

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

zobaczymy co w jądrze siedzi.

Kod:

zbyszek@debian:~$ lsmod
Module                  Size  Used by
nls_utf8                1208  0 
isofs                  27480  0 
udf                    66612  0 
ppdev                   5030  0 
lp                      7462  0 
powernow_k8            10978  0 
cpufreq_stats           2659  0 
cpufreq_userspace       1992  0 
cpufreq_conservative     5162  0 
cpufreq_powersave        902  0 
fuse                   50625  1 
loop                   11799  0 
firewire_sbp2          11514  0 
snd_hda_codec_realtek   235602  1 
snd_hda_intel          20019  3 
snd_hda_codec          54244  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
snd_pcm                60503  2 snd_hda_intel,snd_hda_codec
snd_seq                42881  0 
snd_timer              15582  2 snd_pcm,snd_seq
snd_seq_device          4493  1 snd_seq
nouveau               353128  0 
ttm                    39986  1 nouveau
snd                    46446  14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
drm_kms_helper         20065  1 nouveau
soundcore               4598  1 snd
drm                   142359  3 nouveau,ttm,drm_kms_helper
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
i2c_piix4               8328  0 
i2c_algo_bit            4225  1 nouveau
i2c_core               15712  5 nouveau,drm_kms_helper,drm,i2c_piix4,i2c_algo_bit
hid_a4tech              1996  0 
joydev                  8459  0 
edac_core              29261  0 
edac_mce_amd            6433  0 
serio_raw               3752  0 
pcspkr                  1699  0 
evdev                   7352  14 
parport_pc             18855  1 
processor              29935  1 powernow_k8
parport                27954  3 ppdev,lp,parport_pc
button                  4650  1 nouveau
ext3                  106518  2 
jbd                    37085  1 ext3
mbcache                 5050  1 ext3
usbhid                 33292  0 
hid                    63225  2 hid_a4tech,usbhid
sg                     18744  0 
sr_mod                 12602  0 
cdrom                  29415  1 sr_mod
sd_mod                 29889  4 
ata_generic             3047  0 
crc_t10dif              1276  1 sd_mod
firewire_ohci          19676  0 
firewire_core          36848  2 firewire_sbp2,firewire_ohci
ohci_hcd               19212  0 
ahci                   32374  3 
crc_itu_t               1307  2 udf,firewire_core
floppy                 49087  0 
ehci_hcd               31151  0 
r8169                  29229  0 
pata_atiixp             3489  0 
mii                     3210  1 r8169
libata                133632  3 ata_generic,ahci,pata_atiixp
thermal                11674  0 
thermal_sys            11942  2 processor,thermal
usbcore               122034  4 usbhid,ohci_hcd,ehci_hcd
nls_base                6377  4 nls_utf8,isofs,udf,usbcore
scsi_mod              122149  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
zbyszek@debian:~$

======EDIT=============

Po odświeżeniu initrd dostałem komunikat:

Kod:

root@debian:/home/zbyszek# update-initramfs -u -k `uname -r`
update-initramfs: Generating /boot/initrd.img-2.6.32-5-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169
root@debian:/home/zbyszek#

============EDIT===========

ArnVaker napisał(-a):

Hehe, to jeszcze nie koniec, ale jesteśmy na dobrej drodze. :)

Teraz musisz dodać:

Kod:

blacklist nouveau

do pliku /etc/modprobe.d/blacklist.conf i odświeżyć initrd:

Kod:

update-initramfs -u -k `uname -r`

Po tym powinien uruchamiać się normalnie bez tamtego parametru... Następna w kolejności instalacja sterów Nvidii.

Niestety nie uruchamia się normalnie :(
Zawartość zmienionego pliku:

Kod:

# This file lists modules which will not be loaded as the result of
# alias expansion, with the purpose of preventing the hotplug subsystem
# to load them. It does not affect autoloading of modules by the kernel.
# This file is provided by the udev package.

# evbug is a debug tool and should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# replaced by tmscsim
blacklist am53c974

# these watchdog drivers break some systems
blacklist iTCO_wdt

blacklist nouveau

...slowly and steady wins the race...

Offline

 

#14  2011-02-16 07:18:49

  Bodzio - Ojciec Założyciel

Bodzio
Ojciec Założyciel
Skąd: Gorlice
Zarejestrowany: 2004-04-17
Serwis

Re: Stabilny squeeze i nvidia

@Dino_saur - jest taki przyciska jak "edytuj"...litości.
Scaliłem wszystkie trzy z nocy


Debian jest lepszy niż wszystkie klony
Linux register users: #359018
http://www.freebsd.org/gifs/powerlogo.gif
Beskid Niski

Offline

 

#15  2011-02-16 07:26:39

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

Bodzio napisał(-a):

@Dino_saur - jest taki przyciska jak "edytuj"...litości.
Scaliłem wszystkie trzy z nocy

Sorry, to ta trzecia  w nocy + stres ...


...slowly and steady wins the race...

Offline

 

#16  2011-02-16 07:43:40

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Stabilny squeeze i nvidia

Nie musisz nic kombinować.
Wystarczy .że dasz

Kod:

aptitude install nvidia-glx

reszta się samo zrobi.

Chyba ,że masz starszą kartę to

Kod:

aptitude install nvidia-glx-legacy-173xx

albo

Kod:

aptitude install nvidia-glx-legacy-96xx

bądź

Kod:

aptitude install nvidia-glx-legacy-71xx

w zależności jaką masz kartę i jaki sterownik jest dla niej odpowiedni.

Obecnie chodzi albo na nouveau bo taki moduł w jądrze siedzi albo na nv.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#17  2011-02-16 10:50:51

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

To z blacklistowaniem nouveau moim zdaniem masz dobrze, nie wiem czemu nie idzie. Sam z ciekawości obadam później czy ten sposób nadal działa. :) Zrób jak Ci ilin napisał i powinno być ok, powinien zrobić to automatycznie.

Offline

 

#18  2011-02-16 11:00:00

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

.Próbowałem zainstalować sterownik przy pomocy skryptu sgfxi - niestety próba nieudana - błąd instalacji. (instalowany był driver 260.19.36)

ilin napisał(-a):

Nie musisz nic kombinować.
.Wystarczy .że dasz

Kod:

aptitude install nvidia-glx

reszta się samo zrobi.

Spróbowałem instalację jw Wygląda na to , że pomyślnie. Choć nie jestem pewien czy jest to optymalny driver...

Kod:

zbyszek@debian:~$ lsmod
Module                  Size  Used by
xt_limit                1782  8 
xt_tcpudp               2319  7 
ipt_LOG                 4518  8 
ipt_MASQUERADE          1554  0 
xt_DSCP                 1995  0 
ipt_REJECT              1953  1 
nf_conntrack_irc        3347  0 
nf_conntrack_ftp        5537  0 
xt_state                1303  6 
ppdev                   5030  0 
lp                      7462  0 
powernow_k8            10978  0 
cpufreq_stats           2659  0 
cpufreq_userspace       1992  0 
cpufreq_conservative     5162  0 
cpufreq_powersave        902  0 
fuse                   50625  1 
iptable_nat             4299  0 
nf_nat                 13388  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4       9833  9 iptable_nat,nf_nat
nf_conntrack           46535  7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4          1139  1 nf_conntrack_ipv4
iptable_mangle          2817  0 
iptable_filter          2258  1 
ip_tables              13899  3 iptable_nat,iptable_mangle,iptable_filter
x_tables               12845  9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,xt_DSCP,ipt_REJECT,xt_state,iptable_nat,ip_tables
loop                   11799  0 
firewire_sbp2          11514  0 
snd_hda_codec_realtek   235602  1 
snd_hda_intel          20019  3 
snd_hda_codec          54244  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
usblp                   9571  0 
snd_pcm                60503  2 snd_hda_intel,snd_hda_codec
snd_seq                42881  0 
snd_timer              15582  2 snd_pcm,snd_seq
snd_seq_device          4493  1 snd_seq
snd                    46446  14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore               4598  1 snd
hid_a4tech              1996  0 
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
nvidia              10670090  0 
edac_core              29261  0 
i2c_piix4               8328  0 
edac_mce_amd            6433  0 
i2c_core               15712  2 nvidia,i2c_piix4
joydev                  8459  0 
evdev                   7352  14 
usb_storage            39625  0 
parport_pc             18855  1 
parport                27954  3 ppdev,lp,parport_pc
pcspkr                  1699  0 
serio_raw               3752  0 
processor              29935  1 powernow_k8
button                  4650  0 
ext3                  106518  2 
jbd                    37085  1 ext3
mbcache                 5050  1 ext3
usbhid                 33292  0 
hid                    63225  2 hid_a4tech,usbhid
sg                     18744  0 
sr_mod                 12602  0 
sd_mod                 29889  4 
crc_t10dif              1276  1 sd_mod
cdrom                  29415  1 sr_mod
ata_generic             3047  0 
ahci                   32374  3 
firewire_ohci          19676  0 
floppy                 49087  0 
firewire_core          36848  2 firewire_sbp2,firewire_ohci
crc_itu_t               1307  1 firewire_core
pata_atiixp             3489  0 
r8169                  29229  0 
ohci_hcd               19212  0 
mii                     3210  1 r8169
ehci_hcd               31151  0 
thermal                11674  0 
thermal_sys            11942  2 processor,thermal
usbcore               122034  6 usblp,usb_storage,usbhid,ohci_hcd,ehci_hcd
libata                133632  3 ata_generic,ahci,pata_atiixp
nls_base                6377  1 usbcore
scsi_mod              122149  6 firewire_sbp2,usb_storage,sg,sr_mod,sd_mod,libata
zbyszek@debian:~$

Grub nie wymaga już interwencji przy starcie.

Teraz pora pomyśleć o instalacji drukarki :)

Ostatnio edytowany przez Dino_saur (2011-02-16 11:02:14)


...slowly and steady wins the race...

Offline

 

#19  2011-02-16 11:02:51

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

A wrzuć teraz /var/log/Xorg.*.log...

Offline

 

#20  2011-02-16 11:09:20

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

ArnVaker napisał(-a):

A wrzuć teraz /var/log/Xorg.*.log...

Kod:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux debian 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e9a45d95-c227-46d5-a870-91c7f8048bd7 ro quiet nomodeset nouveau.modeset=0
Build Date: 12 January 2011  02:59:50AM
xorg-server 2:1.7.7-11 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 16 10:45:06 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c8a00
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:06fd:10de:062e nVidia Corporation G98 [Quadro NVS 295] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.36.31  Thu Jun  3 08:59:25 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 2.1.17
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8600M GT, GeForce 9650M GS, GeForce 8700M GT, Quadro FX 370,
    Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570,
    Quadro FX 1700, GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS,
    GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 295, Quadro CX,
    Quadro FX 5800, Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce 9800 GX2, GeForce 9800 GT,
    GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO,
    GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+,
    GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX,
    GeForce GTX 260M, Quadro FX 3700, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce GT 120,
    GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce GT 130M,
    GeForce 9500 GT, Quadro FX 380, Quadro FX 580, Quadro FX 1700M,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400 GS,
    GeForce 9300M GS, GeForce G100, GeForce 9200M GS, GeForce 9300M GS,
    Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400, GeForce 9400M G,
    GeForce 9400M, GeForce 9300 / nForce 730i, GeForce G102M,
    GeForce G102M, GeForce 9400, ION, ION LE, GeForce GT 220,
    GeForce 210, GeForce GT 230M, GeForce GT 240M, GeForce G210,
    GeForce 205, GeForce 310, GeForce 210, GeForce 310, GeForce G210M,
    Quadro FX 380 LP, GeForce GT 240, GeForce GTS 260M, GeForce GTS 250M
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA Quadro NVS 295 at 01@00:00:0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
(II) NV(0): Initializing int10
(II) NV(0): Bad V_BIOS checksum
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x7f052f9b1000
(--) NV(0): Total video RAM: 256.0 MB
(--) NV(0):       BAR1 size: 256.0 MB
(--) NV(0):   Mapped memory: 255.0 MB
(II) NV(0): Linear framebuffer mapped at 0x7f051fab1000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NV(0): Ignoring unsupported DisplayPort output 1
(II) NV(0): Ignoring unsupported DisplayPort output 2
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(II) NV(0): Ignoring unsupported output type 15 at port -1
(--) NV(0): Connector map:
(--) NV(0):   Bus 2 -> SOR1
(--) NV(0):   Bus 4 -> SOR2
(--) NV(0): Load detection: 295
(II) NV(0): I2C bus "I2C2" initialized.
(II) NV(0): Output DVI1 using monitor section Monitor0
(II) NV(0): I2C bus "I2C4" initialized.
(II) NV(0): Output DVI2 has no monitor section
(II) NV(0): Probing for EDID on I2C bus 2...
(II) NV(0): I2C device "I2C2:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: ACI  Model: 19e4  Serial#: 16843009
(II) NV(0): Year: 2008  Week: 43
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 41  vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) NV(0): Default color space is primary color space
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.648 redY: 0.339   greenX: 0.292 greenY: 0.603
(II) NV(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 10
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) NV(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) NV(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
(II) NV(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
(II) NV(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
(II) NV(0): Serial No: 8ALMIZ006252
(II) NV(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: ASUS VH192
(II) NV(0): EDID (in hex):
(II) NV(0):     00ffffffffffff000469e41901010101
(II) NV(0):     2b120103802917782e3d85a6564a9a24
(II) NV(0):     125054afcd10714f8140810081c00101
(II) NV(0):     010101010101662156aa51001e30468f
(II) NV(0):     33009ae61000001e000000ff0038414c
(II) NV(0):     4d495a3030363235320a000000fd0037
(II) NV(0):     4b1e500e000a202020202020000000fc
(II) NV(0):     00415355532056483139320a20200034
(II) NV(0): EDID for output DVI1
(II) NV(0): Manufacturer: ACI  Model: 19e4  Serial#: 16843009
(II) NV(0): Year: 2008  Week: 43
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 41  vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) NV(0): Default color space is primary color space
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.648 redY: 0.339   greenX: 0.292 greenY: 0.603
(II) NV(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 10
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) NV(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) NV(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
(II) NV(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
(II) NV(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
(II) NV(0): Serial No: 8ALMIZ006252
(II) NV(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: ASUS VH192
(II) NV(0): EDID (in hex):
(II) NV(0):     00ffffffffffff000469e41901010101
(II) NV(0):     2b120103802917782e3d85a6564a9a24
(II) NV(0):     125054afcd10714f8140810081c00101
(II) NV(0):     010101010101662156aa51001e30468f
(II) NV(0):     33009ae61000001e000000ff0038414c
(II) NV(0):     4d495a3030363235320a000000fd0037
(II) NV(0):     4b1e500e000a202020202020000000fc
(II) NV(0):     00415355532056483139320a20200034
(II) NV(0): EDID vendor "ACI", prod id 6628
(II) NV(0): Using EDID range info for horizontal sync
(II) NV(0): Using EDID range info for vertical refresh
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
(II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
(II) NV(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) NV(0): EDID vendor "ACI", prod id 6628
(II) NV(0): Printing probed modes for output DVI1
(II) NV(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
(II) NV(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
(II) NV(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) NV(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Probing for EDID on I2C bus 4...
(II) NV(0): I2C device "I2C4:ddc2" registered at address 0xA0.
(II) NV(0):   ... none found
(II) NV(0): EDID for output DVI2
(II) NV(0): Output DVI1 connected
(II) NV(0): Output DVI2 disconnected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output DVI1 using initial mode 1366x768
(II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) NV(0): Virtual size is 1366x1366 (pitch 1536)
(**) NV(0):  Driver mode "1366x768": 85.5 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
(II) NV(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
(**) NV(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NV(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NV(0):  Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
(II) NV(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
(**) NV(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NV(0):  Driver mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(**) NV(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NV(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NV(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NV(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NV(0): Display dimensions: (410, 230) mm
(**) NV(0): DPI set to (84, 150)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.2.1
    ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(--) NV(0): 183.99 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) NV(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) NV(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device HID Keyboard Device (/dev/input/event1)
(**) HID Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) HID Keyboard Device: always reports core events
(**) HID Keyboard Device: Device: "/dev/input/event1"
(II) HID Keyboard Device: Found keys
(II) HID Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device HID Keyboard Device (/dev/input/event2)
(**) HID Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) HID Keyboard Device: always reports core events
(**) HID Keyboard Device: Device: "/dev/input/event2"
(II) HID Keyboard Device: Found 1 mouse buttons
(II) HID Keyboard Device: Found scroll wheel(s)
(II) HID Keyboard Device: Found relative axes
(II) HID Keyboard Device: Found absolute axes
(II) HID Keyboard Device: Found keys
(II) HID Keyboard Device: Configuring as mouse
(II) HID Keyboard Device: Configuring as keyboard
(**) HID Keyboard Device: YAxisMapping: buttons 4 and 5
(**) HID Keyboard Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(EE) HID Keyboard Device: failed to initialize for relative axes.
(II) HID Keyboard Device: initialized for absolute axes.
(II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event6)
(**) A4Tech PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event6"
(II) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Found relative axes
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(II) A4Tech PS/2+USB Mouse: initialized for relative axes.
(II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) NV(0): Probing for EDID on I2C bus 2...
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: ACI  Model: 19e4  Serial#: 16843009
(II) NV(0): Year: 2008  Week: 43
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 41  vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) NV(0): Default color space is primary color space
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.648 redY: 0.339   greenX: 0.292 greenY: 0.603
(II) NV(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 10
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) NV(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) NV(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
(II) NV(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
(II) NV(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
(II) NV(0): Serial No: 8ALMIZ006252
(II) NV(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: ASUS VH192
(II) NV(0): EDID (in hex):
(II) NV(0):     00ffffffffffff000469e41901010101
(II) NV(0):     2b120103802917782e3d85a6564a9a24
(II) NV(0):     125054afcd10714f8140810081c00101
(II) NV(0):     010101010101662156aa51001e30468f
(II) NV(0):     33009ae61000001e000000ff0038414c
(II) NV(0):     4d495a3030363235320a000000fd0037
(II) NV(0):     4b1e500e000a202020202020000000fc
(II) NV(0):     00415355532056483139320a20200034
(II) NV(0): EDID vendor "ACI", prod id 6628
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
(II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
(II) NV(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) NV(0): EDID vendor "ACI", prod id 6628
(II) NV(0): Probing for EDID on I2C bus 4...
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus 2...
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: ACI  Model: 19e4  Serial#: 16843009
(II) NV(0): Year: 2008  Week: 43
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 41  vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) NV(0): Default color space is primary color space
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.648 redY: 0.339   greenX: 0.292 greenY: 0.603
(II) NV(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 10
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) NV(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) NV(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
(II) NV(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
(II) NV(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
(II) NV(0): Serial No: 8ALMIZ006252
(II) NV(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
(II) NV(0): Monitor name: ASUS VH192
(II) NV(0): EDID (in hex):
(II) NV(0):     00ffffffffffff000469e41901010101
(II) NV(0):     2b120103802917782e3d85a6564a9a24
(II) NV(0):     125054afcd10714f8140810081c00101
(II) NV(0):     010101010101662156aa51001e30468f
(II) NV(0):     33009ae61000001e000000ff0038414c
(II) NV(0):     4d495a3030363235320a000000fd0037
(II) NV(0):     4b1e500e000a202020202020000000fc
(II) NV(0):     00415355532056483139320a20200034
(II) NV(0): EDID vendor "ACI", prod id 6628
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
(II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
(II) NV(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) NV(0): EDID vendor "ACI", prod id 6628
(II) NV(0): Probing for EDID on I2C bus 4...
(II) NV(0):   ... none found

...slowly and steady wins the race...

Offline

 

#21  2011-02-16 11:11:58

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

Jak dla mnie, to on chodzi teraz na sterowniku nv, a nie nvidia. Uzupełniłeś xorg.conf?

Offline

 

#22  2011-02-16 11:31:29

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

ArnVaker napisał(-a):

Uzupełniłeś xorg.conf?

Nie , i prawdę powiedziawszy nie mam pojęcia jak to zrobić....


...slowly and steady wins the race...

Offline

 

#23  2011-02-16 11:32:47

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Stabilny squeeze i nvidia

Uruchom

Kod:

nvidia-xconfig

Musisz ten pakiet doinstalować jak nie masz.


Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#24  2011-02-16 11:51:03

  Dino_saur - Użytkownik

Dino_saur
Użytkownik
Skąd: Małopolska
Zarejestrowany: 2009-11-13

Re: Stabilny squeeze i nvidia

ilin napisał(-a):

Uruchom

Kod:

nvidia-xconfig

Musisz ten pakiet doinstalować jak nie masz.

Doinstalowałem, uruchomiłem, restartowałem - są już stery nvidii (I think so ) - Przy uruchamianiu systemu pojawiają sie charakterystyczne 'wzory' graficzne, które towarzyszyły mi przy wersji testowej. Jak ja bardzo za nimi tęskniłem :)))
Poza tym zaczął działać poprawnie system graficzny kde - przedtem robił co chciał;)
A poza tym, a nawet przede wszystkim widzę to w xorg.conf
Dzięki !


...slowly and steady wins the race...

Offline

 

#25  2011-02-16 11:55:09

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Stabilny squeeze i nvidia

To jeszcze wrzuć loga znowu, tak dla pewności. :) Przy okazji... nvidia-settings możesz sobie doinstalować, przydatny przy sterach Nvidii.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)