Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2014-07-25 15:27:32

  Zath - Użytkownik

Zath
Użytkownik
Zarejestrowany: 2014-07-23

[SOLVED] Problem z wirtualnymi terminalami

Początek edycji z 31. września 2014:
Udało mi się naprawić problem.
Rozwiązanie polegało na wejściu do shella z GRUBa, wpisaniu dwóch komend:

Kod:

set pager=1
vbeinfo

a następnie odnalezieniu odpowiedniej rozdzielczości ekranu, zapisaniu (np. na kartce) liczby na początku w wybranej pozycji wraz z "vga=", na przykład "vga=0x111".
Potem trzeba wyjść z shella (Esc), zbootować Linuxa, przejść do katalogu /etc/grub.d, otworzyć "10-linux.conf" w edytorze tekstu, odnaleźć linijki z kernelem i dodać wcześniej zapisanego argumentu na koniec tej linijki. Potem tylko reboot i już można przełączać terminale z X-ów.

Co do powodu problemu, to jest nim opcja UseTiming1366 potrzebna do poprawnego działania X-ów na SiS 771/671.
Koniec edycji z 31. września 2014.

Od razu przejdę do problemu:
Nie mogę przełączyć się z X na wirtualny terminal.
Gdy nacisnę Ctrl+Alf+F[1-6], ekran na ułamek sekundy staje się czarny, potem "zacina się", a po 1-2 sekundach restartuje się  X.org, oczywiście nie przenosząc mnie do wirtualnego terminala, lecz pozostawiając mnie przy okienku do logowania.

Gdy próbuję przełączyć na vt używając komendy chvt, otrzymuję następujący błąd:

Kod:

Couldn't get a file descriptor referring to the console

Chvt powoduje ten sam problem jak Ctrl+Alt+F[1-6], gdy zostanie włączony kontem root.

X.org w wersji 1.16.
Sterownik graficzny sisimedia (od użytkownika mati75 z tego forum)
Debian Jessie/Testing
LXDE, Openbox 3.5.2
Karta graficzna SiS Mirage 3 (SiS 771/671)

Output z inxi -F -f:

Kod:

System:    Host: localhost Kernel: 3.14-1-686-pae i686 (32 bit) 
           Desktop: LXDE (Openbox 3.5.2) Distro: Debian GNU/Linux jessie/sid 
Machine:   System: ASUSTeK product: K50C v: 1.0
           Mobo: ASUS model: K50C v: 1.0
           Bios: American Megatrends v: 209 date: 01/06/2010
CPU:       Single core Intel Celeron D 220 (-UP-) cache: 512 KB
           clocked at 1500 MHz
           CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
           constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts fpu fxsr lahf_lm
           lm mca mce mmx monitor msr mtrr nx pae pat pbe pdcm pebs pge pni
           pse pse36 sep ss sse sse2 ssse3 tm tm2 tsc vme xtpr
Graphics:  Card: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter
           Display Server: X.Org 1.16.0 driver: N/A
           Resolution: 1368x768@60.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
           GLX Version: 3.0 Mesa 10.2.3
Audio:     Card Silicon Integrated Systems [SiS] Azalia Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.14-1-686-pae
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: eth0 state: down mac: 48:5b:39:44:6b:a3
           Card-2: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
           driver: ath9k
           IF: wlan0 state: up mac: 1c:4b:d6:ab:fb:64
Drives:    HDD Total Size: 250.1GB (23.5% used)
           ID-1: /dev/sda model: ST9250315AS size: 250.1GB
Partition: ID-1: / size: 9.4G used: 3.6G (41%) fs: ext4 dev: /dev/sda6 
           ID-2: /home size: 78G used: 48G (65%) fs: ext4 dev: /dev/sda7 
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 60.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 133 Uptime: 3:06 Memory: 491.1/3039.7MB 
           Client: Shell (bash) inxi: 2.1.28

/var/log/Xorg.0.log:

Kod:

[  7409.427] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[  7409.427] X Protocol Version 11, Revision 0
[  7409.427] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[  7409.427] Current Operating System: Linux localhost 3.14-1-686-pae #1 SMP Debian 3.14.12-1 (2014-07-11) i686
[  7409.427] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=40ad67e7-53e8-4593-bda6-b8768ac119a8 ro quiet
[  7409.427] Build Date: 17 July 2014  11:01:50PM
[  7409.427] xorg-server 2:1.16.0-1 (http://www.debian.org/support) 
[  7409.427] Current version of pixman: 0.32.6
[  7409.427]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  7409.427] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  7409.427] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 25 16:29:09 2014
[  7409.427] (==) Using config file: "/etc/X11/xorg.conf"
[  7409.427] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  7409.428] (==) No Layout section.  Using the first Screen section.
[  7409.428] (**) |-->Screen "Default Screen" (0)
[  7409.428] (**) |   |-->Monitor "Configured Monitor"
[  7409.428] (**) |   |-->Device "Configured Video Device"
[  7409.428] (**) Option "IgnoreABI"
[  7409.429] (**) Ignoring ABI Version
[  7409.429] (==) Automatically adding devices
[  7409.429] (==) Automatically enabling devices
[  7409.429] (==) Automatically adding GPU devices
[  7409.429] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  7409.429]     Entry deleted from font path.
[  7409.429] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[  7409.429] (==) ModulePath set to "/usr/lib/xorg/modules"
[  7409.429] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  7409.429] (II) Loader magic: 0xb776f700
[  7409.429] (II) Module ABI versions:
[  7409.429]     X.Org ANSI C Emulation: 0.4
[  7409.429]     X.Org Video Driver: 18.0
[  7409.429]     X.Org XInput driver : 21.0
[  7409.429]     X.Org Server Extension : 8.0
[  7409.429] (II) xfree86: Adding drm device (/dev/dri/card0)
[  7409.431] (--) PCI:*(0:1:0:0) 1039:6351:1043:19e2 rev 16, Mem @ 0xd0000000/268435456, 0xfe9e0000/131072, I/O @ 0x0000dc00/128
[  7409.431] (II) LoadModule: "glx"
[  7409.432] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  7409.434] (II) Module glx: vendor="X.Org Foundation"
[  7409.434]     compiled for 1.16.0, module version = 1.0.0
[  7409.434]     ABI class: X.Org Server Extension, version 8.0
[  7409.434] (==) AIGLX enabled
[  7409.434] (II) LoadModule: "sisimedia"
[  7409.434] (II) Loading /usr/lib/xorg/modules/drivers/sisimedia_drv.so
[  7409.435] (II) Module sisimedia: vendor="X.Org Foundation"
[  7409.435]     compiled for 1.15.1, module version = 0.8.0
[  7409.435]     Module class: X.Org Video Driver
[  7409.435]     ABI class: X.Org Video Driver, version 15.0
[  7409.435] (WW) module ABI major version (15) doesn't match the server's version (18)
[  7409.435] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
    SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340,
    [M]670/[M]770[GX], [M]671/[M]771[GX]
[  7409.435] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
    Volari V3XT/V5/V8/Duo (XG40/XG42)
[  7409.435] (++) using VT number 7

[  7409.436] (II) SIS_pci_probe - begin, entity_num=0
[  7409.436] (II)                        vendor_id=0x1039
[  7409.436] (II)                        device_id=0x6351
[  7409.436] (II)                        bus=1
[  7409.436] (II)                        dev=0
[  7409.436] (II)                        func=0
[  7409.436] (II) SIS_pci_probe - ConfigPciEntity found
[  7409.436] (II) SIS(0): SIS_pci_probe - GetEntityInfo chipset is 0x6351
[  7409.436] (II) SIS(0): SIS_pci_probe - end
[  7409.436] (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.15.1.0)
[  7409.436] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[  7409.436] (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
[  7409.436] (II) SIS(0): *** for documentation, updates and a Premium Version.
[  7409.436] (II) SIS(0): RandR rotation support not available in this version.
[  7409.436] (II) SIS(0): Dynamic modelist support not available in this version.
[  7409.436] (II) SIS(0): Screen growing support not available in this version.
[  7409.436] (II) SIS(0): Advanced Xv video blitter not available in this version.
[  7409.436] (II) SIS(0): Advanced MergedFB support not available in this version.
[  7409.436] (--) SIS(0): sisfb not found
[  7409.436] (--) SIS(0): Relocated I/O registers at 0xDC00
[  7409.437] (II) Loading sub module "ramdac"
[  7409.437] (II) LoadModule: "ramdac"
[  7409.437] (II) Module "ramdac" already built-in
[  7409.437] (II) SIS(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[  7409.437] (**) SIS(0): Depth 24, (--) framebuffer bpp 32
[  7409.437] (==) SIS(0): RGB weight 888
[  7409.437] (==) SIS(0): Default visual is TrueColor
[  7409.441] (WW) SIS(0): Could not find/read video BIOS
[  7409.442] (**) SIS(0): Option "UseTiming1366" "yes"
[  7409.442] (==) SIS(0): Color HW cursor is enabled
[  7409.442] (II) SIS(0): Using VRAM command queue, size 512k
[  7409.442] (==) SIS(0): Hotkey display switching is enabled
[  7409.442] (==) SIS(0): SiSCtrl utility interface is disabled
[  7409.442] (II) SIS(0): For information on SiSCtrl, see
        http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
[  7409.442] (==) SIS(0): X server will not keep DPI constant for all screen sizes
[  7409.442] (==) SIS(0): DRI enabled
[  7409.442] (II) SIS(0): Using Special Timing 1366x768 with LVDS.
[  7409.442] (--) SIS(0): 131072K shared video RAM (UMA)
[  7409.442] (--) SIS(0): DRAM type: DDR SDRAM
[  7409.442] (--) SIS(0): Memory clock: 503.174 MHz
[  7409.442] (--) SIS(0): DRAM bus width: 64 bit
[  7409.442] (--) SIS(0): Linear framebuffer at 0xD0000000
[  7409.442] (--) SIS(0): MMIO registers at 0xFE9E0000 (size 64K)
[  7409.442] (--) SIS(0): VideoRAM: 131072 KB
[  7409.442] (II) SIS(0): Using 20480K of framebuffer memory at offset 0K
[  7409.442] (II) Loading sub module "ddc"
[  7409.442] (II) LoadModule: "ddc"
[  7409.442] (II) Module "ddc" already built-in
[  7409.442] (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1)
[  7412.196] (--) SIS(0): No CRT1/VGA detected
[  7412.196] (--) SIS(0): Detected LCD/plasma panel (1366x768, 14, non-exp., RGB18 [ef030a])
[  7412.196] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[  7412.196] (II) SIS(0): CRT1 gamma correction is enabled
[  7412.196] (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
[  7412.196] (II) SIS(0): CRT2 gamma correction is enabled
[  7412.196] (--) SIS(0): Memory bandwidth at 32 bpp is 1006.35 MHz
[  7412.196] (--) SIS(0): Detected LCD PanelDelayCompensation 0x06 (for LCD=CRT2)
[  7412.196] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1)
[  7412.196] (--) SIS(0): 302LV/302ELV: Using EMI 0x680d7039 (LCD)
[  7412.196] (--) SIS(0): CRT2 DDC probing failed
[  7412.196] (==) SIS(0): Min pixel clock is 10 MHz
[  7412.196] (--) SIS(0): Max pixel clock is 340 MHz
[  7412.196] (II) SIS(0): Replaced entire mode list with built-in modes
[  7412.196] (II) SIS(0): Correcting missing CRT2 monitor HSync range
[  7412.196] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
[  7412.196] (II) SIS(0): "Unknown reason" in the following list means that the mode
[  7412.196] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[  7412.196] (II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz
[  7412.196] (II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz
[  7412.196] (II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz
[  7412.196] (WW) SIS(0): Unable to estimate virtual size
[  7412.196] (II) SIS(0): Clock range:  10.00 to 340.00 MHz
[  7412.196] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[  7412.196] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[  7412.196] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
[  7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[  7412.197] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[  7412.197] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[  7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[  7412.197] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[  7412.197] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[  7412.197] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[  7412.197] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[  7412.197] (--) SIS(0): Virtual size is 1368x768 (pitch 1368)
[  7412.197] (**) SIS(0): *Default mode "1366x768" (1368x768) (For CRT device: 85.2 MHz, 47.8 kHz, 59.8 Hz)
[  7412.197] (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
[  7412.197] (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
[  7412.197] (==) SIS(0): DPI set to (96, 96)
[  7412.197] (II) Loading sub module "fb"
[  7412.197] (II) LoadModule: "fb"
[  7412.197] (II) Loading /usr/lib/xorg/modules/libfb.so
[  7412.198] (II) Module fb: vendor="X.Org Foundation"
[  7412.198]     compiled for 1.16.0, module version = 1.0.0
[  7412.198]     ABI class: X.Org ANSI C Emulation, version 0.4
[  7412.198] (II) Loading sub module "exa"
[  7412.198] (II) LoadModule: "exa"
[  7412.198] (II) Loading /usr/lib/xorg/modules/libexa.so
[  7412.198] (II) Module exa: vendor="X.Org Foundation"
[  7412.198]     compiled for 1.16.0, module version = 2.6.0
[  7412.198]     ABI class: X.Org Video Driver, version 18.0
[  7412.198] (--) Depth 24 pixmap format is 32 bpp
[  7412.198] (II) Loading sub module "vbe"
[  7412.198] (II) LoadModule: "vbe"
[  7412.199] (II) Loading /usr/lib/xorg/modules/libvbe.so
[  7412.199] (II) Module vbe: vendor="X.Org Foundation"
[  7412.199]     compiled for 1.16.0, module version = 1.1.0
[  7412.199]     ABI class: X.Org Video Driver, version 18.0
[  7412.199] (II) Loading sub module "int10"
[  7412.199] (II) LoadModule: "int10"
[  7412.199] (II) Loading /usr/lib/xorg/modules/libint10.so
[  7412.199] (II) Module int10: vendor="X.Org Foundation"
[  7412.200]     compiled for 1.16.0, module version = 1.0.0
[  7412.200]     ABI class: X.Org Video Driver, version 18.0
[  7412.200] (II) SIS(0): initializing int10
[  7412.200] (II) SIS(0): Primary V_BIOS segment is: 0xc000
[  7412.202] (II) SIS(0): VESA BIOS detected
[  7412.202] (II) SIS(0): VESA VBE Version 3.0
[  7412.202] (II) SIS(0): VESA VBE Total Mem: 131072 kB
[  7412.202] (II) SIS(0): VESA VBE OEM: SiS
[  7412.202] (II) SIS(0): VESA VBE OEM Software Rev: 1.0
[  7412.202] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
[  7412.202] (II) SIS(0): VESA VBE OEM Product: 6330
[  7412.202] (II) SIS(0): VESA VBE OEM Product Rev: 3.74.22b
[  7412.208] (II) SIS(0): Setting standard mode 0x7f
[  7413.549] drmOpenDevice: node name is /dev/dri/card0
[  7413.549] drmOpenDevice: open result is 10, (OK)
[  7413.549] drmOpenDevice: node name is /dev/dri/card0
[  7413.549] drmOpenDevice: open result is 10, (OK)
[  7413.549] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  7413.549] drmOpenDevice: node name is /dev/dri/card0
[  7413.549] drmOpenDevice: open result is 10, (OK)
[  7413.549] drmOpenByBusid: drmOpenMinor returns 10
[  7413.549] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  7413.549] (II) [drm] DRM interface version 1.4
[  7413.549] (II) [drm] DRM open master succeeded.
[  7413.549] (II) SIS(0): [drm] Using the DRM lock SAREA also for drawables.
[  7413.549] (II) SIS(0): [drm] framebuffer handle = 0xd0000000
[  7413.549] (II) SIS(0): [drm] added 1 reserved context for kernel
[  7413.550] (II) SIS(0): X context handle = 0x1
[  7413.550] (II) SIS(0): [drm] installed DRM signal handler
[  7413.550] (II) SIS(0): [dri] Video RAM memory heap: 0x1400000 to 0x7f70000 (110016KB)
[  7413.550] (II) SIS(0): [dri] handle = 0xfe9e0000, size = 65536
[  7413.550] (II) SIS(0): [drm] AGP enabled
[  7413.577] (II) SIS(0): [drm] Allocated 32MB AGP memory
[  7413.580] (II) SIS(0): [drm] Bound 32MB AGP memory
[  7413.580] (II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22)
[  7413.580] (II) SIS(0): [dri] Visual configs initialized
[  7413.580] (II) EXA(0): Offscreen pixmap area of 16769024 bytes
[  7413.580] (II) EXA(0): Driver registered support for the following operations:
[  7413.580] (II)         Solid
[  7413.580] (II)         Copy
[  7413.580] (--) SIS(0): CPU frequency 1500.33Mhz
[  7413.583] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
[  7413.594] (--) SIS(0):     Checked libc memcpy()...     274.9 MiB/s
[  7413.604] (--) SIS(0):     Checked built-in-1 memcpy()...     278.4 MiB/s
[  7413.624] (--) SIS(0):     Checked built-in-2 memcpy()...     133.4 MiB/s
[  7413.634] (--) SIS(0):     Checked MMX memcpy()...     277.7 MiB/s
[  7413.651] (--) SIS(0):     Checked SSE memcpy()...     282.4 MiB/s
[  7413.661] (--) SIS(0):     Checked MMX2 memcpy()...     283.3 MiB/s
[  7413.661] (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
[  7413.661] (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
[  7413.662] (--) SIS(0): CPU frequency 1500.33Mhz
[  7413.664] (II) SIS(0): Benchmarking video RAM to system RAM memory transfer methods:
[  7413.713] (--) SIS(0):     Checked libc memcpy()...     64.8 MiB/s
[  7413.768] (--) SIS(0):     Checked built-in-1 memcpy()...     51.1 MiB/s
[  7413.835] (--) SIS(0):     Checked built-in-2 memcpy()...     42.3 MiB/s
[  7413.873] (--) SIS(0):     Checked MMX memcpy()...     75.7 MiB/s
[  7413.905] (--) SIS(0):     Checked SSE memcpy()...     86.2 MiB/s
[  7413.947] (--) SIS(0):     Checked MMX2 memcpy()...     78.6 MiB/s
[  7413.947] (--) SIS(0): Using SSE method for aligned data transfers from video RAM
[  7413.947] (--) SIS(0): Using MMX2 method for unaligned data transfers from video RAM
[  7413.947] (==) SIS(0): Backing store enabled
[  7413.947] (==) SIS(0): Silken mouse enabled
[  7413.949] (==) SIS(0): DPMS enabled
[  7413.949] (--) SIS(0): Hardware supports one video overlay
[  7413.949] (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT2
[  7413.950] PCI: CNF00 - CNF1B:
[  7413.950]     00: 00000000:00000000000000000000000000000000
[  7413.950]     04: 41004100:01000001000000000100000100000000
[  7413.950]     08: ffffffff:11111111111111111111111111111111
[  7413.950]     0c: ffffffff:11111111111111111111111111111111
[  7413.950]     10: b7143c00:10110111000101000011110000000000
[  7413.950]     14: 00008e0d:00000000000000001000111000001101
[  7413.950]     18: ffffffff:11111111111111111111111111111111
[  7413.950] PCI: CNF2C - CNF47:
[  7413.950]     2c: ffffffff:11111111111111111111111111111111
[  7413.950]     30: ffffffff:11111111111111111111111111111111
[  7413.950]     34: ffffffff:11111111111111111111111111111111
[  7413.950]     38: ffffffff:11111111111111111111111111111111
[  7413.950]     3c: ffffffff:11111111111111111111111111111111
[  7413.950]     40: 01100420:00000001000100000000010000100000
[  7413.950]     44: 00ff4407:00000000111111110100010000000111
[  7413.950] AGP: CNF50 - CNF5B:
[  7413.950]     50: ac13ac13:10101100000100111010110000010011
[  7413.950]     54: ac13ac13:10101100000100111010110000010011
[  7413.950]     58: 00003030:00000000000000000011000000110000
[  7413.950] CRT1: SR05 - SR12:
[  7413.950]     05: a1:10100001
[  7413.950]     06: 42:01000010
[  7413.950]     07: 44:01000100
[  7413.950]     08: 70:01110000
[  7413.950]     09: 01:00000001
[  7413.950]     0a: 10:00010000
[  7413.950]     0b: 00:00000000
[  7413.950]     0c: 03:00000011
[  7413.950]     0d: 00:00000000
[  7413.950]     0e: 42:01000010
[  7413.950]     0f: 08:00001000
[  7413.950]     10: 57:01010111
[  7413.950]     11: 03:00000011
[  7413.950]     12: 00:00000000
[  7413.950] CRT1: SR13 - SR16 (reserved):
[  7413.950]     13: 00:00000000
[  7413.950]     14: 00:00000000
[  7413.950]     15: 00:00000000
[  7413.950]     16: 00:00000000
[  7413.950] CRT1: SR19 - SR1A (reserved)
[  7413.950] CRT1: SR1B - SR3A:
[  7413.950]     1b: 00:00000000
[  7413.950]     1c: 8f:10001111
[  7413.950]     1d: 00:00000000
[  7413.950]     1e: 7a:01111010
[  7413.950]     1f: c0:11000000
[  7413.950]     20: a1:10100001
[  7413.950]     21: a3:10100011
[  7413.950]     22: f3:11110011
[  7413.950]     23: 00:00000000
[  7413.950]     24: 00:00000000
[  7413.950]     25: 00:00000000
[  7413.950]     26: 40:01000000
[  7413.950]     27: 1f:00011111
[  7413.950]     28: 7a:01111010
[  7413.950]     29: 06:00000110
[  7413.950]     2a: 82:10000010
[  7413.950]     2b: 1b:00011011
[  7413.950]     2c: e1:11100001
[  7413.950]     2d: 01:00000001
[  7413.950]     2e: 29:00101001
[  7413.950]     2f: 01:00000001
[  7413.950]     30: 82:10000010
[  7413.951]     31: 00:00000000
[  7413.951]     32: 50:01010000
[  7413.951]     33: 20:00100000
[  7413.951]     34: 00:00000000
[  7413.951]     35: 00:00000000
[  7413.951]     36: 00:00000000
[  7413.951]     37: 04:00000100
[  7413.951]     38: 86:10000110
[  7413.951]     39: 40:01000000
[  7413.951]     3a: 00:00000000
[  7413.951] CRT1: SR3B (reserved)
[  7413.951] CRT1: SR3C - SR3F:
[  7413.951]     3c: 08:00001000
[  7413.951]     3d: 01:00000001
[  7413.951]     3e: 00:00000000
[  7413.951]     3f: 00:00000000
[  7413.951] CRT1: CR19 - CR1A:
[  7413.951]     19: 00:00000000
[  7413.951]     1a: 00:00000000
[  7413.951] CRT1: CR1B - CR27 (undocumented?)
[  7413.951] CRT1: CR28 - CR2E:
[  7413.951]     28: 04:00000100
[  7413.951]     29: 20:00100000
[  7413.951]     2a: 00:00000000
[  7413.951]     2b: 00:00000000
[  7413.951]     2c: 00:00000000
[  7413.951]     2d: 00:00000000
[  7413.951]     2e: 00:00000000
[  7413.951] CRT1: CR2F (reserved)
[  7413.951] VGA BIOS: CR30 - CR3F:
[  7413.951]     30: 21:00100001
[  7413.951]     31: 40:01000000
[  7413.951]     32: 08:00001000
[  7413.951]     33: 00:00000000
[  7413.951]     34: 7f:01111111
[  7413.951]     35: 00:00000000
[  7413.951]     36: ef:11101111
[  7413.951]     37: 03:00000011
[  7413.951]     38: 20:00100000
[  7413.951]     39: 3c:00111100
[  7413.951]     3a: 00:00000000
[  7413.951]     3b: 08:00001000
[  7413.951]     3c: bc:10111100
[  7413.951]     3d: 20:00100000
[  7413.951]     3e: 00:00000000
[  7413.951]     3f: 00:00000000
[  7413.951] CRT1: CR40 - CR43:
[  7413.951]     40: 00:00000000
[  7413.951]     41: 00:00000000
[  7413.951]     42: 00:00000000
[  7413.951]     43: 00:00000000
[  7413.951] CRT1: CR44 - CR45 (reserved)
[  7413.951] CRT1: CR46 - CR67:
[  7413.951]     46: 00:00000000
[  7413.951]     47: fe:11111110
[  7413.951]     48: c0:11000000
[  7413.951]     49: 08:00001000
[  7413.951]     4a: bf:10111111
[  7413.951]     4b: 88:10001000
[  7413.951]     4c: 00:00000000
[  7413.951]     4d: 10:00010000
[  7413.951]     4e: 10:00010000
[  7413.951]     4f: 20:00100000
[  7413.951]     50: 00:00000000
[  7413.951]     51: 00:00000000
[  7413.951]     52: 12:00010010
[  7413.951]     53: 40:01000000
[  7413.951]     54: 00:00000000
[  7413.951]     55: 00:00000000
[  7413.951]     56: 00:00000000
[  7413.951]     57: 00:00000000
[  7413.951]     58: 00:00000000
[  7413.951]     59: 00:00000000
[  7413.951]     5a: 00:00000000
[  7413.951]     5b: 00:00000000
[  7413.951]     5c: 00:00000000
[  7413.951]     5d: 00:00000000
[  7413.951]     5e: 00:00000000
[  7413.951]     5f: 00:00000000
[  7413.951]     60: 00:00000000
[  7413.951]     61: 00:00000000
[  7413.951]     62: 00:00000000
[  7413.951]     63: 00:00000000
[  7413.951]     64: 00:00000000
[  7413.952]     65: 00:00000000
[  7413.952]     66: 00:00000000
[  7413.952]     67: 00:00000000
[  7413.952] CRT1: CR68 - CR6F (DRAM registers reserved for backward compatibility with 760)
[  7413.952] CRT1: CR70 - CR77 (undocumented?)
[  7413.952] SMA BIOS: CR78 - CR7F:
[  7413.952]     78: 44:01000100
[  7413.952]     79: 71:01110001
[  7413.952]     7a: 98:10011000
[  7413.952]     7b: 02:00000010
[  7413.952]     7c: a3:10100011
[  7413.952]     7d: 0a:00001010
[  7413.952]     7e: a3:10100011
[  7413.952]     7f: 03:00000011
[  7413.952] CRT1: CR80 - CR9B:
[  7413.952]     80: ffffffff:11111111111111111111111111111111
[  7413.952]     84: ffffffff:11111111111111111111111111111111
[  7413.952]     88: ffffffff:11111111111111111111111111111111
[  7413.952]     8c: ffffffff:11111111111111111111111111111111
[  7413.952]     90: ffffffff:11111111111111111111111111111111
[  7413.952]     94: ffffffff:11111111111111111111111111111111
[  7413.952]     98: ffffffff:11111111111111111111111111111111
[  7413.952]     9c: ffffffff:11111111111111111111111111111111
[  7413.952]     a0: ffffffff:11111111111111111111111111111111
[  7413.952]     a4: ffffffff:11111111111111111111111111111111
[  7413.952]     a8: ffffffff:11111111111111111111111111111111
[  7413.952]     ac: ffffffff:11111111111111111111111111111111
[  7413.952]     b0: ffffffff:11111111111111111111111111111111
[  7413.952] CRT1: CRC0 - CRF3:
[  7413.952]     c0: ffffffff:11111111111111111111111111111111
[  7413.952]     c4: ffffffff:11111111111111111111111111111111
[  7413.952]     c8: ffffffff:11111111111111111111111111111111
[  7413.952]     cc: ffffffff:11111111111111111111111111111111
[  7413.952]     d0: ffffffff:11111111111111111111111111111111
[  7413.952]     d4: ffffffff:11111111111111111111111111111111
[  7413.952]     d8: ffffffff:11111111111111111111111111111111
[  7413.952]     dc: ffffffff:11111111111111111111111111111111
[  7413.952]     e0: ffffffff:11111111111111111111111111111111
[  7413.952]     e4: ffffffff:11111111111111111111111111111111
[  7413.952]     e8: ffffffff:11111111111111111111111111111111
[  7413.952]     ec: ffffffff:11111111111111111111111111111111
[  7413.952]     f0: ffffffff:11111111111111111111111111111111
[  7413.952] CRT2: SIGNAL REGISTERS, PART1 00 - 45:
[  7413.952]     00: 41:01000001
[  7413.952]     01: 79:01111001
[  7413.952]     02: 50:01010000
[  7413.952]     03: 57:01010111
[  7413.952]     04: 00:00000000
[  7413.952]     05: 00:00000000
[  7413.952]     06: 00:00000000
[  7413.952]     07: ac:10101100
[  7413.952]     08: f7:11110111
[  7413.952]     09: 52:01010010
[  7413.952]     0a: 66:01100110
[  7413.952]     0b: 7a:01111010
[  7413.952]     0c: 55:01010101
[  7413.952]     0d: 8e:10001110
[  7413.952]     0e: 15:00010101
[  7413.952]     0f: ff:11111111
[  7413.952]     10: 0b:00001011
[  7413.952]     11: 3d:00111101
[  7413.952]     12: 13:00010011
[  7413.952]     13: 00:00000000
[  7413.952]     14: b1:10110001
[  7413.952]     15: 15:00010101
[  7413.952]     16: 00:00000000
[  7413.952]     17: ab:10101011
[  7413.952]     18: 02:00000010
[  7413.952]     19: 27:00100111
[  7413.952]     1a: d8:11011000
[  7413.952]     1b: 15:00010101
[  7413.952]     1c: ff:11111111
[  7413.952]     1d: 13:00010011
[  7413.952]     1e: 00:00000000
[  7413.952]     1f: 56:01010110
[  7413.952]     20: 15:00010101
[  7413.952]     21: ff:11111111
[  7413.952]     22: 77:01110111
[  7413.952]     23: c5:11000101
[  7413.952]     24: 00:00000000
[  7413.952]     25: 00:00000000
[  7413.952]     26: 10:00010000
[  7413.952]     27: 04:00000100
[  7413.952]     28: 00:00000000
[  7413.952]     29: 00:00000000
[  7413.952]     2a: 03:00000011
[  7413.953]     2b: 00:00000000
[  7413.953]     2c: 30:00110000
[  7413.953]     2d: 03:00000011
[  7413.953]     2e: 8e:10001110
[  7413.953]     2f: 05:00000101
[  7413.953]     30: 01:00000001
[  7413.953]     31: 59:01011001
[  7413.953]     32: ba:10111010
[  7413.953]     33: a0:10100000
[  7413.953]     34: 00:00000000
[  7413.953]     35: 22:00100010
[  7413.953]     36: 14:00010100
[  7413.953]     37: b1:10110001
[  7413.953]     38: 62:01100010
[  7413.953]     39: 0a:00001010
[  7413.953]     3a: 00:00000000
[  7413.953]     3b: 00:00000000
[  7413.953]     3c: 00:00000000
[  7413.953]     3d: 00:00000000
[  7413.953]     3e: 01:00000001
[  7413.953]     3f: 01:00000001
[  7413.953]     40: 00:00000000
[  7413.953]     41: 00:00000000
[  7413.953]     42: 00:00000000
[  7413.953]     43: 00:00000000
[  7413.953]     44: 00:00000000
[  7413.953]     45: 00:00000000
[  7413.953] CRT2: TV SIGNAL REGISTERS, PART2 00 - 4d:
[  7413.953]     00: 3c:00111100
[  7413.953]     01: 37:00110111
[  7413.953]     02: 13:00010011
[  7413.953]     03: ff:11111111
[  7413.953]     04: 04:00000100
[  7413.953]     05: 15:00010101
[  7413.953]     06: ff:11111111
[  7413.953]     07: 0c:00001100
[  7413.953]     08: 0c:00001100
[  7413.953]     09: 90:10010000
[  7413.953]     0a: 40:01000000
[  7413.953]     0b: 01:00000001
[  7413.953]     0c: 0a:00001010
[  7413.953]     0d: 06:00000110
[  7413.953]     0e: 0d:00001101
[  7413.953]     0f: 04:00000100
[  7413.953]     10: 0a:00001010
[  7413.953]     11: 06:00000110
[  7413.953]     12: 14:00010100
[  7413.953]     13: 0d:00001101
[  7413.953]     14: 04:00000100
[  7413.953]     15: 0a:00001010
[  7413.953]     16: 00:00000000
[  7413.953]     17: 81:10000001
[  7413.953]     18: 1b:00011011
[  7413.953]     19: 15:00010101
[  7413.953]     1a: 78:01111000
[  7413.953]     1b: f6:11110110
[  7413.953]     1c: 86:10000110
[  7413.953]     1d: 55:01010101
[  7413.953]     1e: da:11011010
[  7413.953]     1f: 08:00001000
[  7413.953]     20: 07:00000111
[  7413.953]     21: d6:11010110
[  7413.953]     22: 35:00110101
[  7413.953]     23: 5e:01011110
[  7413.953]     24: 47:01000111
[  7413.953]     25: 35:00110101
[  7413.953]     26: e2:11100010
[  7413.953]     27: de:11011110
[  7413.953]     28: 52:01010010
[  7413.953]     29: f3:11110011
[  7413.953]     2a: 6a:01101010
[  7413.953]     2b: 55:01010101
[  7413.953]     2c: 55:01010101
[  7413.953]     2d: 18:00011000
[  7413.953]     2e: f7:11110111
[  7413.953]     2f: fe:11111110
[  7413.954]     30: 85:10000101
[  7413.954]     31: 21:00100001
[  7413.954]     32: f0:11110000
[  7413.954]     33: 7b:01111011
[  7413.954]     34: d6:11010110
[  7413.954]     35: 00:00000000
[  7413.954]     36: 00:00000000
[  7413.954]     37: 00:00000000
[  7413.954]     38: 00:00000000
[  7413.954]     39: 92:10010010
[  7413.954]     3a: 8f:10001111
[  7413.954]     3b: 40:01000000
[  7413.954]     3c: 60:01100000
[  7413.954]     3d: 80:10000000
[  7413.954]     3e: 14:00010100
[  7413.954]     3f: ff:11111111
[  7413.954]     40: ff:11111111
[  7413.954]     41: ff:11111111
[  7413.954]     42: 14:00010100
[  7413.954]     43: 4d:01001101
[  7413.954]     44: 00:00000000
[  7413.954]     45: 60:01100000
[  7413.954]     46: 58:01011000
[  7413.954]     47: fd:11111101
[  7413.954]     48: 00:00000000
[  7413.954]     49: 01:00000001
[  7413.954]     4a: 82:10000010
[  7413.954]     4b: 69:01101001
[  7413.954]     4c: 61:01100001
[  7413.954]     4d: 03:00000011
[  7413.954] CRT2: TV COPY PROTECTION, PART3 00 - 40:
[  7413.954]     00: 00:00000000
[  7413.954]     01: 1c:00011100
[  7413.954]     02: 69:01101001
[  7413.954]     03: 30:00110000
[  7413.954]     04: 65:01100101
[  7413.954]     05: 2e:00101110
[  7413.954]     06: c1:11000001
[  7413.954]     07: 80:10000000
[  7413.954]     08: 4c:01001100
[  7413.954]     09: 17:00010111
[  7413.954]     0a: 40:01000000
[  7413.954]     0b: 00:00000000
[  7413.954]     0c: 24:00100100
[  7413.954]     0d: 21:00100001
[  7413.954]     0e: 21:00100001
[  7413.954]     0f: 3c:00111100
[  7413.954]     10: a4:10100100
[  7413.954]     11: 34:00110100
[  7413.954]     12: a0:10100000
[  7413.954]     13: f5:11110101
[  7413.954]     14: b7:10110111
[  7413.954]     15: 52:01010010
[  7413.954]     16: 48:01001000
[  7413.954]     17: 58:01011000
[  7413.954]     18: e9:11101001
[  7413.954]     19: 2c:00101100
[  7413.954]     1a: 00:00000000
[  7413.954]     1b: 80:10000000
[  7413.954]     1c: c8:11001000
[  7413.954]     1d: 30:00110000
[  7413.954]     1e: 00:00000000
[  7413.954]     1f: 22:00100010
[  7413.954]     20: 28:00101000
[  7413.954]     21: 10:00010000
[  7413.954]     22: 48:01001000
[  7413.954]     23: 5a:01011010
[  7413.954]     24: 00:00000000
[  7413.954]     25: 50:01010000
[  7413.955]     26: e4:11100100
[  7413.955]     27: a0:10100000
[  7413.955]     28: 02:00000010
[  7413.955]     29: 78:01111000
[  7413.955]     2a: 00:00000000
[  7413.955]     2b: 90:10010000
[  7413.955]     2c: 14:00010100
[  7413.955]     2d: 4e:01001110
[  7413.955]     2e: 19:00011001
[  7413.955]     2f: 10:00010000
[  7413.955]     30: 72:01110010
[  7413.955]     31: 03:00000011
[  7413.955]     32: 25:00100101
[  7413.955]     33: 20:00100000
[  7413.955]     34: c3:11000011
[  7413.955]     35: e7:11100111
[  7413.955]     36: 30:00110000
[  7413.955]     37: 1c:00011100
[  7413.955]     38: 42:01000010
[  7413.955]     39: a2:10100010
[  7413.955]     3a: a9:10101001
[  7413.955]     3b: 01:00000001
[  7413.955]     3c: 60:01100000
[  7413.955]     3d: 6c:01101100
[  7413.955]     3e: 40:01000000
[  7413.955]     3f: a6:10100110
[  7413.955]     40: 01:00000001
[  7413.955] CRT2: SIGNAL REGISTERS, PART4 00 - 3A:
[  7413.955]     00: 07:00000111
[  7413.955]     01: e1:11100001
[  7413.955]     02: 01:00000001
[  7413.955]     03: 4f:01001111
[  7413.955]     04: 00:00000000
[  7413.955]     05: 00:00000000
[  7413.955]     06: 00:00000000
[  7413.955]     07: ff:11111111
[  7413.955]     08: 3f:00111111
[  7413.955]     09: 00:00000000
[  7413.955]     0a: a5:10100101
[  7413.955]     0b: 44:01000100
[  7413.955]     0c: 83:10000011
[  7413.955]     0d: 8e:10001110
[  7413.955]     0e: 60:01100000
[  7413.955]     0f: 03:00000011
[  7413.955]     10: 80:10000000
[  7413.955]     11: 00:00000000
[  7413.955]     12: 08:00001000
[  7413.955]     13: 01:00000001
[  7413.955]     14: 01:00000001
[  7413.955]     15: 2b:00101011
[  7413.955]     16: f7:11110111
[  7413.955]     17: 10:00010000
[  7413.955]     18: 32:00110010
[  7413.955]     19: 40:01000000
[  7413.955]     1a: 00:00000000
[  7413.955]     1b: 00:00000000
[  7413.955]     1c: 28:00101000
[  7413.955]     1d: 95:10010101
[  7413.955]     1e: 10:00010000
[  7413.955]     1f: f6:11110110
[  7413.955]     20: aa:10101010
[  7413.955]     21: d0:11010000
[  7413.955]     22: fa:11111010
[  7413.955]     23: c7:11000111
[  7413.955]     24: 0e:00001110
[  7413.955]     25: 10:00010000
[  7413.955]     26: 06:00000110
[  7413.955]     27: 8c:10001100
[  7413.955]     28: b0:10110000
[  7413.956]     29: 04:00000100
[  7413.956]     2a: 00:00000000
[  7413.956]     2b: 00:00000000
[  7413.956]     2c: 02:00000010
[  7413.956]     2d: 5f:01011111
[  7413.956]     2e: 02:00000010
[  7413.956]     2f: 3f:00111111
[  7413.956]     30: 68:01101000
[  7413.956]     31: 0d:00001101
[  7413.956]     32: 70:01110000
[  7413.956]     33: 39:00111001
[  7413.956]     34: 10:00010000
[  7413.956]     35: cb:11001011
[  7413.956]     36: a4:10100100
[  7413.956]     37: 08:00001000
[  7413.956]     38: 51:01010001
[  7413.956]     39: ff:11111111
[  7413.956]     3a: fd:11111101
[  7413.956] CRT2: PALETTE SIGNAL REGISTERS, PART5 00 - 00 (?):
[  7413.956]     00: 00:00000000
[  7413.956] (II) SIS(0): Default Xv adaptor is Video Overlay
[  7413.956] (II) SIS(0): [DRI] installation complete
[  7413.956] (II) SIS(0): Direct rendering enabled
[  7414.003] (II) SIS(0): Initialized SISCTRL extension version 0.1
[  7414.003] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
[  7414.003] (==) RandR enabled
[  7414.017] (II) SELinux: Disabled on system
[  7414.019] (II) AIGLX: Screen 0 is not DRI2 capable
[  7414.019] (EE) AIGLX: reverting to software rendering
[  7414.048] (II) AIGLX: Loaded and initialized swrast
[  7414.048] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  7414.118] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  7414.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  7414.118] (II) LoadModule: "evdev"
[  7414.119] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  7414.119] (II) Module evdev: vendor="X.Org Foundation"
[  7414.119]     compiled for 1.15.99.904, module version = 2.8.2
[  7414.119]     Module class: X.Org XInput Driver
[  7414.119]     ABI class: X.Org XInput driver, version 21.0
[  7414.119] (II) Using input driver 'evdev' for 'Power Button'
[  7414.119] (**) Power Button: always reports core events
[  7414.119] (**) evdev: Power Button: Device: "/dev/input/event4"
[  7414.119] (--) evdev: Power Button: Vendor 0 Product 0x1
[  7414.119] (--) evdev: Power Button: Found keys
[  7414.119] (II) evdev: Power Button: Configuring as keyboard
[  7414.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[  7414.119] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  7414.119] (**) Option "xkb_rules" "evdev"
[  7414.119] (**) Option "xkb_model" "pc105"
[  7414.119] (**) Option "xkb_layout" "pl"
[  7414.157] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  7414.157] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  7414.157] (II) Using input driver 'evdev' for 'Video Bus'
[  7414.157] (**) Video Bus: always reports core events
[  7414.157] (**) evdev: Video Bus: Device: "/dev/input/event5"
[  7414.158] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  7414.158] (--) evdev: Video Bus: Found keys
[  7414.158] (II) evdev: Video Bus: Configuring as keyboard
[  7414.158] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input9/event5"
[  7414.158] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  7414.158] (**) Option "xkb_rules" "evdev"
[  7414.158] (**) Option "xkb_model" "pc105"
[  7414.158] (**) Option "xkb_layout" "pl"
[  7414.159] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  7414.159] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  7414.159] (II) Using input driver 'evdev' for 'Power Button'
[  7414.159] (**) Power Button: always reports core events
[  7414.159] (**) evdev: Power Button: Device: "/dev/input/event1"
[  7414.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[  7414.159] (--) evdev: Power Button: Found keys
[  7414.159] (II) evdev: Power Button: Configuring as keyboard
[  7414.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event1"
[  7414.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  7414.159] (**) Option "xkb_rules" "evdev"
[  7414.159] (**) Option "xkb_model" "pc105"
[  7414.159] (**) Option "xkb_layout" "pl"
[  7414.160] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[  7414.160] (II) No input driver specified, ignoring this device.
[  7414.160] (II) This device may have been added with another device file.
[  7414.161] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  7414.161] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  7414.161] (II) Using input driver 'evdev' for 'Sleep Button'
[  7414.161] (**) Sleep Button: always reports core events
[  7414.161] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[  7414.161] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  7414.161] (--) evdev: Sleep Button: Found keys
[  7414.161] (II) evdev: Sleep Button: Configuring as keyboard
[  7414.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event2"
[  7414.161] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  7414.161] (**) Option "xkb_rules" "evdev"
[  7414.161] (**) Option "xkb_model" "pc105"
[  7414.161] (**) Option "xkb_layout" "pl"
[  7414.163] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[  7414.163] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[  7414.163] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[  7414.163] (**) USB 2.0 Camera: always reports core events
[  7414.163] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event8"
[  7414.163] (--) evdev: USB 2.0 Camera: Vendor 0x13d3 Product 0x5130
[  7414.163] (--) evdev: USB 2.0 Camera: Found keys
[  7414.163] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[  7414.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input15/event8"
[  7414.163] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 10)
[  7414.163] (**) Option "xkb_rules" "evdev"
[  7414.163] (**) Option "xkb_model" "pc105"
[  7414.163] (**) Option "xkb_layout" "pl"
[  7414.164] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[  7414.164] (II) No input driver specified, ignoring this device.
[  7414.164] (II) This device may have been added with another device file.
[  7414.165] (II) config/udev: Adding input device HDA SIS966 Mic (/dev/input/event11)
[  7414.165] (II) No input driver specified, ignoring this device.
[  7414.165] (II) This device may have been added with another device file.
[  7414.165] (II) config/udev: Adding input device HDA SIS966 Headphone (/dev/input/event10)
[  7414.165] (II) No input driver specified, ignoring this device.
[  7414.165] (II) This device may have been added with another device file.
[  7414.166] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[  7414.166] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[  7414.166] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[  7414.166] (**) Asus Laptop extra buttons: always reports core events
[  7414.166] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event6"
[  7414.166] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[  7414.166] (--) evdev: Asus Laptop extra buttons: Found keys
[  7414.166] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[  7414.166] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input10/event6"
[  7414.166] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[  7414.166] (**) Option "xkb_rules" "evdev"
[  7414.166] (**) Option "xkb_model" "pc105"
[  7414.166] (**) Option "xkb_layout" "pl"
[  7414.167] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  7414.167] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  7414.167] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  7414.167] (**) AT Translated Set 2 keyboard: always reports core events
[  7414.167] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  7414.168] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  7414.168] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  7414.168] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  7414.168] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  7414.168] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  7414.168] (**) Option "xkb_rules" "evdev"
[  7414.168] (**) Option "xkb_model" "pc105"
[  7414.168] (**) Option "xkb_layout" "pl"
[  7414.169] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[  7414.169] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[  7414.169] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[  7414.169] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[  7414.169] (II) LoadModule: "synaptics"
[  7414.169] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  7414.170] (II) Module synaptics: vendor="X.Org Foundation"
[  7414.170]     compiled for 1.15.99.904, module version = 1.8.0
[  7414.170]     Module class: X.Org XInput Driver
[  7414.170]     ABI class: X.Org XInput driver, version 21.0
[  7414.170] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[  7414.170] (**) ETPS/2 Elantech Touchpad: always reports core events
[  7414.170] (**) Option "Device" "/dev/input/event12"
[  7414.170] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088 (res 0)
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 (res 0)
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  7414.171] (**) ETPS/2 Elantech Touchpad: always reports core events
[  7414.171] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event12"
[  7414.171] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[  7414.171] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[  7414.171] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[  7414.171] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.154
[  7414.171] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[  7414.171] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[  7414.171] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  7414.171] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  7414.171] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  7414.172] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  7414.172] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  7414.173] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[  7414.173] (II) No input driver specified, ignoring this device.
[  7414.173] (II) This device may have been added with another device file.

ls /dev/tty*:

Kod:

/dev/tty    /dev/tty19  /dev/tty3   /dev/tty40  /dev/tty51  /dev/tty62
/dev/tty0   /dev/tty2   /dev/tty30  /dev/tty41  /dev/tty52  /dev/tty63
/dev/tty1   /dev/tty20  /dev/tty31  /dev/tty42  /dev/tty53  /dev/tty7
/dev/tty10  /dev/tty21  /dev/tty32  /dev/tty43  /dev/tty54  /dev/tty8
/dev/tty11  /dev/tty22  /dev/tty33  /dev/tty44  /dev/tty55  /dev/tty9
/dev/tty12  /dev/tty23  /dev/tty34  /dev/tty45  /dev/tty56  /dev/ttyS0
/dev/tty13  /dev/tty24  /dev/tty35  /dev/tty46  /dev/tty57  /dev/ttyS1
/dev/tty14  /dev/tty25  /dev/tty36  /dev/tty47  /dev/tty58  /dev/ttyS2
/dev/tty15  /dev/tty26  /dev/tty37  /dev/tty48  /dev/tty59  /dev/ttyS3
/dev/tty16  /dev/tty27  /dev/tty38  /dev/tty49  /dev/tty6
/dev/tty17  /dev/tty28  /dev/tty39  /dev/tty5   /dev/tty60
/dev/tty18  /dev/tty29  /dev/tty4   /dev/tty50  /dev/tty61

Bardzo prosiłbym o pomoc w zdiagnozowaniu błędu.

Edit: To na pewno problem z Xem, ponieważ po zbootowaniu kernela z opcją "init=/bin/sh" mogę przełączać terminal i używając chvt i Ctrl+Alt+F[1-6].

Ostatnio edytowany przez Zath (2014-09-01 03:36:57)


http://i.imgur.com/L4bT95a.png
Sześcioletni laptop, dobrze się trzyma na Archu :)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)