Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2007-03-15 11:15:31

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Jeśli komuś działa akceleracja na radeonie to proszę o wklejenie swojego xorg.conf.
Zauważyłem że aticonfig --initial dodaje swoje 3 grosze do tego pliku ale nei kasuje z niego informacji starych i mam zarówno ati jak i fglrx. Wszystko po 2 razy razem z monitorem itd...


Pozdrawiam

Offline

 

#2  2007-03-15 11:36:02

  AlexZar - Użytkownik

AlexZar
Użytkownik
Zarejestrowany: 2007-03-07

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Jakiś czas temu miałem ati i zachwałem działający konfig ,ale nie wiem jak bedzie działał z nowymi sterami. Mam nadzieje że się na coś przyda. 

Kod:



# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"      # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath    "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier    "Keyboard1"
    Driver    "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"    "xfree86"
    Option "XkbModel"    "pc104"
    Option "XkbLayout"    "pl"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier    "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   30-85
    VertRefresh 50-160
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   31.5       
    VertRefresh 50 - 70
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "clone" 
    Option "HSync2"                     "31.5       " 
    Option "VRefresh2"                  "50 - 70" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "TVFormat"                   "PAL-D"     
    Option "TVStandard"                 "VIDEO"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "2"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:2:0:0"    # vendor=1002, device=4150
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Pozdrawiam


AMD64 3000+
Abit A8N-E
GeForce 7600GT

Offline

 

#3  2007-03-15 11:59:51

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Dziex ale Twoj chyba odbiega od teraźniejszej normy :]
Teraz wyglada zupełnie inaczej więc poczekam na następny :]


Pozdrawiam

Offline

 

#4  2007-03-15 12:08:28

  BialyS - Członek DUG

BialyS
Członek DUG
Skąd: Olecko
Zarejestrowany: 2006-11-23
Serwis

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Kod:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        Option          "AIGLX" "off"
EndSection

Section "Files"

        # path to defoma fonts
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
        Load  "i2c"
        Load  "bitmap"
        Load  "ddc"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "glx"
        Load  "int10"
        Load  "vbe"
EndSection

Section "InputDevice"
        Identifier  "Generic Keyboard"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "pl"
        Option      "XkbOptions" "altwin:super_win"
EndSection

Section "InputDevice"
        Identifier  "Configured Mouse"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "ImPS/2"
        Option      "Emulate3Buttons" "true"
EndSection


Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        HorizSync    30.0 - 80.0
        VertRefresh  60.0 - 75.0
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection


Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
        BusID       "PCI:1:0:0"

       Option       "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"
##      Option      "TVStandard" "PAL-B"
#       Option      "TVFormat" "NTSC-M"
#       Option      "TVOverscan" "off"
#       Option      "OverlayOnCRTC2" "0"
        Option      "DesktopSetup" "clone mode"
##        Option      "MonitorLayout" "STV, CRT"
##        Option      "NoTV" "no"
##        Option      "DesktopSetup" "0x00000100"

EndSection



Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24

SubSection "Display"
                Depth     24
                Modes    "1024x768"
EndSubSection

EndSection

Section "DRI"
        Mode         0666
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection


http://annabielawska.pl Biuro Rachunkowe | http://ranking.cebr.pl Największy w sieci ranking biur rachunkowych

Offline

 

#5  2007-03-15 12:41:02

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Dzieki, probowalem pare kombinacji ale bez rezultatu. U mnie wyglada to tak:

Kod:

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig-Screen[0]" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "vbe"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "pl"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/psaux"
    Option        "Protocol" "ImPS/2"
    Option        "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier   "L1730P"
    HorizSync    30.0 - 71.0
    VertRefresh  56.0 - 75.0
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "ATI Technologies Inc RV350 AS [Radeon 9550]"
    Driver      "ati"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver      "fglrx"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "ATI Technologies Inc RV350 AS [Radeon 9550]"
    Monitor    "L1730P"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Kod:

# lsmod
Module                  Size  Used by
fglrx                 395564  0 

Ma ktoś jakiegoś pomysła?
Stery instalowalem wg tego FAQ http://dug.net.pl/faq/faq-7-185-Instalacja_sterowni … w_debiana.php

Pliki nagłówkowe jajca i xorg-dev mam zainstalowane.


Pozdrawiam

Offline

 

#6  2007-03-15 13:14:07

  terefere - Członek DUG

terefere
Członek DUG
Zarejestrowany: 2005-09-16
Serwis

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Spróbuj po prostu przeinstalować instalatorem ze strony ati jak nie pójdzie upewnij sie że masz w systemie pakiety dev xorga(nie doczytałem).

Mój konfig wyglada tak:

Kod:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig-Screen[0]" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load  "i2c"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "vbe"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "pl"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ImPS/2"
    Option        "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier   "LS902U"
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "ATI Technologies Inc RV350 AP [Radeon 9600]"
    Driver      "ati"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver      "fglrx"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "ATI Technologies Inc RV350 AP [Radeon 9600]"
    Monitor    "LS902U"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Działa i chuczy w savaga fajnie sie pyka


Nigdy się niektórych rzeczy nie dowiesz, jeśli na niektóre pytania samemu sobie nie odpowiesz - STFW

Offline

 

#7  2007-03-15 13:15:47

  Ryszard - Piwo DUG

Ryszard
Piwo DUG
Skąd: Zadupia
Zarejestrowany: 2006-06-30

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Driver      "fglrx"
kurde miałem radka i zawsze miałem z nim Bubu w 3d wywaliłem go na Nvidie i swiety spokuj ati te stery wolne i zamkniete to jest chore ati jest do bani przedewszystkim do bańi pod linuxem i enter.Zawsze śie motałem z tym jebńięt.............. 3d Ati To SYF POWERED NVIDIA RULES


http://img196.imageshack.us/img196/3770/freebsde.jpg

Offline

 

#8  2007-03-15 13:23:24

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Niestety, to nic nie daje, nawet jak w jednej sekcji i drugiej naraz jest fglrx. Poza tym moduł fglrx się ładuje... ale co z tego... 8-|


Pozdrawiam

Offline

 

#9  2007-03-15 13:28:05

  Ryszard - Piwo DUG

Ryszard
Piwo DUG
Skąd: Zadupia
Zarejestrowany: 2006-06-30

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Wiem walczyłem też z tym i ni huhu wydaje śię to kwestia tych sterów dlatego ati umnie po miesiacu poszła w alegro


http://img196.imageshack.us/img196/3770/freebsde.jpg

Offline

 

#10  2007-03-15 13:33:44

  Kudzu - 1NF:rM@7iON1SP0vvErr

Kudzu
1NF:rM@7iON1SP0vvErr
Skąd: Universe
Zarejestrowany: 2007-01-06

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

oto moj xorg.. posiadam ati radeon 9600 i smiga akceleracja jak burza:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    FontPath    "/usr/share/fonts/X11/misc"
    FontPath    "/usr/X11R6/lib/X11/fonts/misc"
    FontPath    "/usr/share/fonts/X11/cyrillic"
    FontPath    "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/share/fonts/X11/Type1"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath    "/usr/share/fonts/X11/100dpi"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath    "/usr/share/fonts/X11/75dpi"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi"
    # path to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "pl"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "Device"
    Identifier    "ATI Technologies Inc RV350 AP [Radeon 9600]"
    Driver        "fglrx"
    BusID        "PCI:2:0:0"
    Option        "VideoOverlay" "on"
    Option        "OpenGLOverlay" "off"
EndSection

Section "Monitor"
    Identifier    "SyncMaster"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies Inc RV350 AP [Radeon 9600]"
    Monitor        "SyncMaster"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection


...software is like sex
it's better when it's free..

Offline

 

#11  2007-03-15 14:21:21

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Kodzik przeedytowałem pod Twoj config i tez kiszka akcelleracji nie ma :(


Pozdrawiam

Offline

 

#12  2007-03-15 16:02:28

  Kudzu - 1NF:rM@7iON1SP0vvErr

Kudzu
1NF:rM@7iON1SP0vvErr
Skąd: Universe
Zarejestrowany: 2007-01-06

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

zainstaluj wg tego

zrob wszystko poza aticonfig --initial itp

tylko dpkg-reconfigure xserver-xorg i wybierz fglrx reszte tak jak chce..


...software is like sex
it's better when it's free..

Offline

 

#13  2007-03-15 16:21:25

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Wg tego wlasnie robilem na kilka mozliwych sposobów z edytowaniem pliku xorg.conf recznie i zamianie "ati" na "fglrx" i lipa


Pozdrawiam

Offline

 

#14  2007-03-15 16:29:05

  pablo - Członek DUG

pablo
Członek DUG
Skąd: Białystok
Zarejestrowany: 2006-04-12
Serwis

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Podaj model karty i numer instalowanych sterów.


Pusto :)

Offline

 

#15  2007-03-15 16:38:50

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Wersja 8.28.8-4 (sid) a karta to radeon 9550.


Pozdrawiam

Offline

 

#16  2007-03-16 06:35:59

  ju-rek - Użytkownik

ju-rek
Użytkownik
Skąd: R.........
Zarejestrowany: 2006-04-30

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI


C2Q Q9550@4,0 Ghz - Asus P5Q-E - Nvidia GTX 260 - 2x2gb OCZ Titanium 1150MHz - HDD 500 Gb - Audigy 2 Gold - 2.6.31-zen1
http://img213.imageshack.us/img213/4497/userbar15788xl0.gif

Offline

 

#17  2007-03-16 10:03:14

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

No niestety, zalinkowanie pod wskazane miejsce nic nie dało :(


Pozdrawiam

Offline

 

#18  2007-03-16 14:16:38

  ju-rek - Użytkownik

ju-rek
Użytkownik
Skąd: R.........
Zarejestrowany: 2006-04-30

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

O ile pamiętam to w lsmod przy fglrx powinno być 9 albo 8, a nie jak u ciebie :

Kod:

# lsmod
Module                  Size  Used by
fglrx                 395564  0 

pokaż : lsmod | grep agp i lsmod | grep fglrx


C2Q Q9550@4,0 Ghz - Asus P5Q-E - Nvidia GTX 260 - 2x2gb OCZ Titanium 1150MHz - HDD 500 Gb - Audigy 2 Gold - 2.6.31-zen1
http://img213.imageshack.us/img213/4497/userbar15788xl0.gif

Offline

 

#19  2007-03-16 18:42:44

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Dokładnie, powinno byc chyba 8 bo kiedys jakims cudem na poprzednim systemie udało mi sie za jakimś restartem uzyskać akceleracje (i było chyba 8) lecz była ona tylko do kolejngeo restaru :-/
O to wyniki komend:

Kod:

$ lsmod | grep agp
amd64_agp              12036  0 
agpgart                29360  2 fglrx,amd64_agp

Kod:

$  lsmod | grep fglrx
fglrx                 395564  0 
agpgart                29360  2 fglrx,amd64_agp

Pozdrawiam

Offline

 

#20  2007-03-16 23:50:29

  ju-rek - Użytkownik

ju-rek
Użytkownik
Skąd: R.........
Zarejestrowany: 2006-04-30

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Nie mam 64bit ale  u kumpla jest tak:

Kod:

lsmod | grep agp
ali_agp                4832  0
amd64_agp              8964  1
agpgart                19092  3 fglrx,ali_agp,amd64_agp 

Kod:

lsmod | grep fglrx
fglrx                432912  9
agpgart                19092  3 fglrx,ali_agp,amd64_agp 

więc brakuje ci chyba modułu agp płyty, chyba powinno go ładowac przed załadowaniem amd64_agp


C2Q Q9550@4,0 Ghz - Asus P5Q-E - Nvidia GTX 260 - 2x2gb OCZ Titanium 1150MHz - HDD 500 Gb - Audigy 2 Gold - 2.6.31-zen1
http://img213.imageshack.us/img213/4497/userbar15788xl0.gif

Offline

 

#21  2007-03-17 09:39:17

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Moj system to i386. Proc jest 64bitowy.
Moja plyta to Asus K8N-E i nie mam pojecia jaki to moduł i dlaczego się nie łąduje.
Chipset to nforce3 wiec moze ten moduł nvidia_agp (do czegokolwiek on służy)


Pozdrawiam

Offline

 

#22  2007-03-17 10:02:02

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Doprowadzilem juz do takiej sytuacji

Kod:

$ lsmod | grep agp
nvidia_agp              8092  0 
amd64_agp              12036  0 
agpgart                29360  3 fglrx,nvidia_agp,amd64_agp

Kod:

$ lsmod | grep fglrx
fglrx                 395564  0 
agpgart                29360  3 fglrx,nvidia_agp,amd64_agp

ale dalej cos nie bangla z amd64_agp


Pozdrawiam

Offline

 

#23  2007-03-17 11:13:33

  Quaroll - Użytkownik

Quaroll
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2005-12-26

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

Ja mam radka 9700 PRO i fglrx działa bez problemoo. Co prawda dziwi mnie jak ati mogło zrobić sterowniki bez obsługi pivota - jakaś lipa potworna, bo nvidia to robi odkąd pamiętam.
Instalowałem według przepisu na DUG z repozytoriów.
A nie robiłeś apgrejdu z Sarge'a na Sid'a? Ja jak kiedyś upgradeowałem, to miałem straszny bałagan w systemie i przeróżne funkcje nie wiedzić czemu nie chciały chodzić. Pomogło dopiero wycięcie wszystkiego i ponowna instalacja.


Głupi nie wie, że jest głupi a mądry to wie...

Offline

 

#24  2007-03-17 11:40:20

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

System jest świeżo zainstalowany.


Pozdrawiam

Offline

 

#25  2007-03-17 12:10:52

  korbol - Członek DUG

korbol
Członek DUG
Zarejestrowany: 2005-04-29

Re: Prośba o xorg.conf od ludzi z dzialjącą akceleracją do ATI

P starcie x-ów na konsoli nr1 (apropos jak zrzucić do pliku to co jets na konsoli nr1) widnieje:

Kod:

(WW) fglrx:No matching Device sction for instance (BusID PCI:1:0:1)found
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(EE) AIGLX: Screen 0 is not DRI capable

Pozdrawiam

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)