Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2023-08-23 19:46:39

  Karoll - Użytkownik

Karoll
Użytkownik
Zarejestrowany: 2019-08-12

( SOLVED ) Zmiana rozdzielczosci ekranu

Moj lapek:

Kod:

Acer Aspire 7740G-434G50Mn i5-430M 43,9 cm (17.3") HD+ Intel® Core™ i5 4 GB DDR3-SDRAM 500 GB AMD Mobility Radeon HD 5650

GPU:

Kod:

lspci -v | egrep -i --color 'vga|3d|2d'
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] (prog-if 00 [VGA controller])

lub

Kod:

lshw -c video
[sudo] password for mark: 
  *-display UNCLAIMED       
       description: VGA compatible controller
       product: Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M]
       vendor: Advanced Micro Devices, Inc. [AMD/ATI]
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress msi vga_controller bus_master cap_list
       configuration: latency=0
       resources: memory:d0000000-dfffffff memory:cfee0000-cfefffff ioport:2000(size=256) memory:c0000-dffff

Drivers:

Kod:

sudo lspci -v -s 02:00.0
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] (prog-if 00 [VGA controller])
    Subsystem: Acer Incorporated [ALI] Aspire 7740G
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Memory at cfee0000 (64-bit, non-prefetchable) [size=128K]
    I/O ports at 2000 [size=256]
    Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Kernel modules: radeon

Z tej strony: https://cyberbotics.com/doc/guide/verifying-your-gr … -installation  wynika, ze wcale nie mam zainstalowanych sterow.

this indicates that the hardware driver is currently not installed and that your computer is currently using a slow software emulation of OpenGL:

Dotychczasowe rozdzielczosci:

Kod:

xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 1152 x 864, maximum 1152 x 864
default connected 1152x864+0+0 0mm x 0mm
   1152x864       0.00* 
   1024x768       0.00  
   800x600        0.00

Problem: chce "dolozyc" dodatkowa rozdzielczosc Full HD  1280x1024.
Zrobilem:

Kod:

~/Downloads/amd-catalyst-13.9-linux-x86.x86_64$ ./amd-catalyst-13.9-linux-x86.x86_64.run
Created directory fglrx-install.1eKVRV
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-13.152........................................................................................................
 AMD Catalyst(TM) Proprietary Driver Installer/Packager 

error: Detected X Server version 'XServer _64a' is not supported. Supported versions are X.Org 6.9 or later, up to XServer 1.10 (default:v2:x86_64:lib32:XServer _64a:none:5.10.0-24-amd64:)
Installation will not proceed.

Removing temporary directory: fglrx-install.1eKVRV

I jak tu teraz uzyskac ta rozdzielczosc 1280x1024. ????

Ostatnio edytowany przez Karoll (2023-08-28 10:07:30)


Tolerancja i apatia, to ostatnie cnoty umierającego społeczeństwa

Offline

 

#2  2023-08-23 23:36:47

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: ( SOLVED ) Zmiana rozdzielczosci ekranu

W pierwszej kolejności wrzuć sobie sterownik radeon. Jaką natywnie rozdzielczość obsługuje Twoja matryca? Jeśli ogarnięcie modułu radeon nie pomoże, to może warto zainteresować się:
https://wiki.archlinux.org/title/kernel_mode_settin … odes_and_EDID

Karoll napisał(-a):

Kod:

Removing temporary directory: [b]fglrx[/b]-install.1eKVRV

Chyba tutaj tkwi problem, bo nie pamiętam żeby ktokolwiek używał tego sterownika od czasów po radeonach po x1***. Mimo to prawdopodobnie masz nieodpowiednią wersję do "wieku" systemu, chociaż nawet dobre dobranie ze strony amd może nawet nie pomóc XD
https://www.amd.com/en/support

Offline

 

#3  2023-08-24 11:35:16

  Karoll - Użytkownik

Karoll
Użytkownik
Zarejestrowany: 2019-08-12

Re: ( SOLVED ) Zmiana rozdzielczosci ekranu

https://www.gpuzoo.com/GPU-ATI/Mobility_Radeon_HD_5650_GDDR3.html

Kod:

Maximum digital resolution:    2560 x 1600
Maximum VGA resolution:    2048 x 1536

Tylko takie stery znalazlem:

Kod:

https://www.amd.com/en/support/kb/release-notes/rn-amdgpu-unified-linux-23-10-3

I nie moge ich zainstalowac (jak na poczatku watku)

Ostatnio edytowany przez Karoll (2023-08-24 12:10:50)


Tolerancja i apatia, to ostatnie cnoty umierającego społeczeństwa

Offline

 

#4  2023-08-24 12:12:43

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: ( SOLVED ) Zmiana rozdzielczosci ekranu

Offline

 

#5  2023-08-24 14:18:41

  Pavlo950 - człowiek pasjonat :D

Pavlo950
człowiek pasjonat :D
Zarejestrowany: 2012-02-20
Serwis

Re: ( SOLVED ) Zmiana rozdzielczosci ekranu

Karoll napisał(-a):

Tylko takie stery znalazlem:

Kod:

https://www.amd.com/en/support/kb/release-notes/rn-amdgpu-unified-linux-23-10-3

I nie moge ich zainstalowac (jak na poczatku watku)

A dlaczego nie sprawdzisz tego, o czym wyżej pisałem? Co to za system?

Karoll napisał(-a):

https://www.gpuzoo.com/GPU-ATI/Mobility_Radeon_HD_5650_GDDR3.html

Kod:

Maximum digital resolution:    2560 x 1600
Maximum VGA resolution:    2048 x 1536

Pytałem się o matrycę laptopa, nie o gpu.

Offline

 

#6  2023-08-24 17:15:41

  Karoll - Użytkownik

Karoll
Użytkownik
Zarejestrowany: 2019-08-12

Re: ( SOLVED ) Zmiana rozdzielczosci ekranu

System to Debian 11.
Matryca 1600 x 900.

Kod:

sudo get-edid | edid-decode
This is read-edid version 3.0.2. Prepare for some fun.
Attempting to use i2c interface
Looks like no busses have an EDID. Sorry!
Attempting to use the classical VBE interface

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
    Function supported
    Call successful

    VBE version 300
    VBE string at 0xc0204 "ATI ATOMBIOS"

VBE/DDC service about to be called
    Report DDC capabilities

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
    Function supported
    Call successful

    Monitor and video card combination does not support DDC1 transfers
    Monitor and video card combination supports DDC2 transfers
    0 seconds per 128 byte EDID block transfer
    Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
    Function supported
    Call successful

Looks like VBE was successful. Have a good day.
edid-decode (hex):

00 ff ff ff ff ff ff 00 4c a3 51 30 00 00 00 00
00 12 01 03 80 27 17 78 0a 85 95 99 57 4f 8f 26
21 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 20 2a 40 24 61 84 32 30 30 20
26 00 8e e8 10 00 00 19 00 00 00 0f 00 00 00 00
00 00 00 00 00 1e b4 02 74 00 00 00 00 fe 00 53
41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
00 31 37 33 4b 54 30 31 2d 41 30 31 0a 20 00 a4

----------------

Block 0, Base EDID:
  EDID Structure Version & Revision: 1.3
  Vendor & Product Identification:
    Manufacturer: SEC
    Model: 12369
    Made in: 2008
  Basic Display Parameters & Features:
    Digital display
    Maximum image size: 39 cm x 23 cm
    Gamma: 2.20
    RGB color display
    First detailed timing is the preferred timing
  Color Characteristics:
    Red  : 0.5996, 0.3398
    Green: 0.3095, 0.5595
    Blue : 0.1503, 0.1298
    White: 0.3134, 0.3291
  Established Timings I & II: none
  Standard Timings: none
  Detailed Timing Descriptors:
    DTD 1:  1600x900    59.998 Hz  16:9    56.998 kHz 107.840 MHz (398 mm x 232 mm)
                 Hfront   48 Hsync  32 Hback 212 Hpol N
                 Vfront    2 Vsync   6 Vback  42 Vpol N
    Manufacturer-Specified Display Descriptor (0x0f): 00 0f 00 00 00 00 00 00 00 00 00 1e b4 02 74 00 '..............t.'
    Alphanumeric Data String: 'SAMSUNG'
    Alphanumeric Data String: '173KT01-A01'
Checksum: 0xa4

https://www.panelook.com/LTN173KT01-A01_Samsung_17.3_LCM_overview_8887.html

@Pavlo950 oraz @numer_inaczej
Na razie sie zatrzymalem, bo mysle tak. Skoro moja matryca wspiera 1600x900 rozdzielczosc to wymuszanie wyzszej nie ma sensu. Bo to jest ograniczenie sprzetowe. Moze sie myle to bardzo prosze Kolegow o sprostowanie.

Ostatnio edytowany przez Karoll (2023-08-24 17:34:43)


Tolerancja i apatia, to ostatnie cnoty umierającego społeczeństwa

Offline

 

#7  2023-08-24 18:09:17

  numer_inaczej - Użytkownik

numer_inaczej
Użytkownik
Zarejestrowany: 2014-08-15

Re: ( SOLVED ) Zmiana rozdzielczosci ekranu

Karoll - też mi się tak wydaje. Pionowej 900 raczej nie przeskoczysz.
Możesz chyba wygenerować rozdzielczość podług standardów proporcji do rozmiaru 900 pikseli dla pionowej.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)