Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2014-03-16 15:41:24

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

[Closed] [+] Wywalający się mplayer2 na directfb

Cześć,

próbuje uruchomić jakikolwiek film na mplayer2 w oparciu o directfb i za każdym razem kończy się tak samo:

Kod:

MPlayer2 2.0-728-g2c378c7-1 (C) 2000-2012 MPlayer Team
Cannot open file '/root/.mplayer/input.conf': No such file or directory
Failed to open /root/.mplayer/input.conf.
Cannot open file '/etc/mplayer/input.conf': No such file or directory
Failed to open /etc/mplayer/input.conf.

Playing film.mp4.
Detected file format: QuickTime / MOV (libavformat)
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
Clip info:
 major_brand: mp42
 minor_version: 0
 compatible_brands: isommp42
 creation_time: 2014-03-07 22:19:27
Load subtitles in .
commandline read: mplayer
commandline read: -vo
commandline read: directfb
commandline read: film.mp4

   ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.10 |~~~~~~~~~~~~~~~~~~~~~~~~~~
        (c) 2001-2008  The world wide DirectFB Open Source Community
        (c) 2000-2004  Convergence (integrated media) GmbH
      ----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2012-05-20 12:49) 
(*) Direct/Memcpy: Using libc memcpy()
(*) Direct/Thread: Started 'VT Switcher' (3207) [CRITICAL OTHER/OTHER 0/0] <8388608>...
(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: PixArt USB Optical Mouse (2) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Sleep Button (3) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Lid Switch (4) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Power Button (5) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: ST LIS3LV02DL Accelerometer (6) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: HDA Digital PCBeep (7) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: HDA Intel Headphone (8) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: HDA Intel Line (9) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: HDA Intel Mic (10) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: PC Speaker (11) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: HP WMI hotkeys (12) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: PS/2 Generic Mouse (13) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Video Bus (14) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: SynPS/2 Synaptics TouchPad (15) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Joystick Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
 (!!!)  *** ONCE [Joystick sends JS_EVENT_INIT events, make sure it has been calibrated using 'jscal -c'
] *** [../../../inputdrivers/joystick/joystick.c:99 in joystick_handle_event()]
(*) DirectFB/Input: Joystick 0.9 (directfb.org)
(!) DirectFB/Input: Maximum number of devices reached!
(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: IMPS/2 Mouse (1) 1.0 (directfb.org)
(!) DirectFB/Input: Maximum number of devices reached!
(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: IMPS/2 Mouse (2) 1.0 (directfb.org)
(!) DirectFB/Input: Maximum number of devices reached!
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Surface: Allocated 1280x800 32 bit RGB32 buffer (index 0) at offset 0 and pitch 5120.
Opening video filter: [scale]
[ass] auto-open
Selected video codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 [libavcodec]
Selected audio codec: AAC (Advanced Audio Coding) [libavcodec]
AUDIO: 44100 Hz, 2 ch, floatle, 96.0 kbit/3.40% (ratio: 12001->352800)
AO: [pulse] Init failed: Connection refused
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
VIDEO:  640x360  25.000 fps  564.3 kbps (70.5 kB/s)
[swscaler @ 0x7f4046b5c640]using unscaled yuv420p -> bgra special converter
VO: [directfb] 640x360 => 640x360 BGRA 
 (!!!)  *** WARNING [letting unprivileged IDirectFBDisplayLayer::GetSurface() call pass until cooperative level handling is finished] *** [../../../src/display/idirectfbdisplaylayer.c:174 in IDirectFBDisplayLayer_GetSurface()]
(*) FBDev/Mode: Setting 1280x800 RGB32
(*) FBDev/Mode: Switched to 1280x800 (virtual 1280x800) at 32 bit (RGB32), pitch 5120
(*) FBDev/Surface: Allocated 1280x800 32 bit RGB32 buffer (index 0) at offset 0 and pitch 5120.
(*) FBDev/Surface: Allocated 1280x800 32 bit RGB32 buffer (index 0) at offset 0 and pitch 5120.
(*) FBDev/Mode: Setting 1280x800 RGB32
(*) FBDev/Mode: Switched to 1280x800 (virtual 1280x1600) at 32 bit (RGB32), pitch 5120
 (!!!)  *** WARNING [unable to adjust heap offset] *** [../../../systems/fbdev/surfacemanager.c:167 in dfb_surfacemanager_adjust_heap_offset()]
(*) FBDev/Surface: Allocated 1280x800 32 bit RGB32 buffer (index 1) at offset 4096000 and pitch 5120.
(!) DirectFB/FBDev: Panning display failed (x=0 y=800 ywrap=0 vbl=0)!
    --> Invalid argument
(!) [ 3202:    0.000] --> Caught signal 11 (at 0x7f40380dc000, invalid permissions) <--
 (!!!)  *** WARNING [still objects in 'Layer Region Pool'] *** [../../../lib/fusion/object.c:241 in fusion_object_pool_destroy()]
 (!!!)  *** WARNING [still objects in 'Layer Context Pool'] *** [../../../lib/fusion/object.c:241 in fusion_object_pool_destroy()]
 (!!!)  *** WARNING [still objects in 'Surface Pool'] *** [../../../lib/fusion/object.c:241 in fusion_object_pool_destroy()]


MPlayer interrupted by signal 6 in module: check_framedrop
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
  won't help unless you provide this information when reporting a possible bug.

Testowałem na 3 systemach na 3 różnych platformach sprzętowych i wszędzie jest to samo. Spotkał się ktoś z czymś takim?

Ostatnio edytowany przez mati75 (2014-03-17 09:49:54)


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#2  2014-03-16 16:56:35

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: [Closed] [+] Wywalający się mplayer2 na directfb

Na pewno chodziło ci o DirectFB, a nie FBdev2?

Ten drugi jest tylko z mplayer1 w Deb Multimedia (i działaczy)

DFB nie udało mi się pokonać (film leciał, ale kolory miał żółte)

Fervi

Offline

 

#3  2014-03-16 18:56:14

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: [Closed] [+] Wywalający się mplayer2 na directfb

fbdev wcale nie działa. W piątek sprawdzałem na i działało, teraz mi nie działa. Żadnych aktualizacji nie było. Sprawdzę jeszcze ten mplayer.


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

#4  2014-03-16 19:54:06

  fervi - Użytkownik

fervi
Użytkownik
Zarejestrowany: 2010-03-14

Re: [Closed] [+] Wywalający się mplayer2 na directfb

mati75 napisał(-a):

fbdev wcale nie działa. W piątek sprawdzałem na i działało, teraz mi nie działa. Żadnych aktualizacji nie było. Sprawdzę jeszcze ten mplayer.

mplayer -vo help

W Mplayer2 usunęli obsługę fbdev i fbdev2, ale w starym mplayer(1) jest jeszcze (i jej używam na serwerze)

Fervi

Offline

 

#5  2014-03-17 09:49:28

  mati75 - Psuj

mati75
Psuj
Skąd: masz ten towar?
Zarejestrowany: 2010-03-14

Re: [Closed] [+] Wywalający się mplayer2 na directfb

Na mplayer1 na fbdev2 poszło. A co najlepsze mplayer2 z directfb działa na tym:

Kod:

00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)

a na starszym modelu nie chce.


https://l0calh0st.pl/obrazki/userbar.png

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)