Forum Debian Users Gang

Grzeslaw · 2010-12-12 22:06:25

Witam,

Mam serwerek Xeon X5650, 12GB ramu. Chodzi na nim serwer gier HLDS. Kernel debianowy defaultowy nie byl 1000hz wiec bylem zmuszony do rekompilacji. Na serwerze co 10min pojawiają się 2-7sek lagi jakby wtyka eth poszla w diably ;-) I potem znow wraca do normy.

Za cholere nie wime co to może być. Może macie jakieś koncepcje?

Kod:

root@hyyc:/# mii-tool  eth0
SIOCGMIIREG on eth0 failed: Input/output error
SIOCGMIIREG on eth0 failed: Input/output error
eth0: negotiated 100baseTx-FD, link ok
root@hyyc:/# ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: off
        Supports Wake-on: pumbag
        Wake-on: g
        Current message level: 0x00000001 (1)
        Link detected: yes

Może coś z sieciówką? Albo jakas opcja kernela?
W kernelu zmienialem jeszcze przez syscrl:

Kod:

net.ipv4.tcp_fin_timeout = 25
net.ipv4.tcp_keepalive_time = 1800
net.ipv4.tcp_window_scaling = 0
net.ipv4.tcp_sack = 0
net.ipv4.tcp_timestamps = 0

Powoli kończą się pomysły.. a serwer laguje mimo ze jest mocny.. Jakieś koncepcje?

Sieciówke mam jako moduł w kernelu. I są tam 2 takie same karty sieciowe. Myślałem, że może kabel. zrekonifgurowałem interfejsy, przepiełem jednak nie ma poprawy [; Pamięc w użyciu to połowa dostępnej pamięci czyli 6GB. Serwer to xeon 2.67 24cory, 12GB ramu.

Poniżej link do 5Mb pliku tekstowego z zawierającego wyniki:
IOSTAT="iostat -xtc 1 1800"
MPSTAT="mpstat -P ALL 1 1800"
VMSTAT="vmstat 1 1800"
http://www15.speedyshare.com/files/25704035/downloa … 010-12-14.txt

Może ktoś będzie w stanie coś doradzić? Mi to wygląda na problemy z prockiem, albo dyskiem. Choć dysk hdparmem checkniety nie wykazuje błędów, i wszystko naturalnie. Hmm ....

Ostatnio edytowany przez Grzeslaw (2010-12-14 17:13:37)

zielkam · 2010-12-14 20:20:15

hej,

pokaż wynik

Kod:

ifconfig

ethtool -S eth0

cat /proc/interrupts

Jaki ethernetów używasz ? Jakie karty ? Pokaż

Kod:

lspci

Jaki kernel

Kod:

 uname -a

I jeszcze jakich systemów plików używasz :)

Ostatnio edytowany przez zielkam (2010-12-14 20:24:19)

Grzeslaw · 2010-12-15 01:43:30

Na dyskach jest RAID. Kernela kompilowałem sam, ale problem występuje też na dystrybucyjnym...

Kod:

root@shoot2:~# uname -a
Linux shoot2 2.6.36.1 #1 SMP Fri Dec 10 17:29:39 CET 2010 x86_64 GNU/Linux
root@shoot2:~# lspci 
00:00.0 Host bridge: Intel Corporation 5500 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:08.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 8 (rev 13)
00:09.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 (rev 13)
00:0a.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 10 (rev 13)
00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:16.0 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.2 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.3 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.4 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.5 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.6 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:16.7 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
01:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 10)
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
root@shoot2:~# ethtool -S eth0
NIC statistics:
     rx_packets: 101465184
     tx_packets: 106664855
     rx_bytes: 8447367868
     tx_bytes: 16870391597
     rx_broadcast: 278134
     tx_broadcast: 0
     rx_multicast: 0
     tx_multicast: 6
     rx_errors: 0
     tx_errors: 0
     tx_dropped: 0
     multicast: 0
     collisions: 0
     rx_length_errors: 0
     rx_over_errors: 0
     rx_crc_errors: 0
     rx_frame_errors: 0
     rx_no_buffer_count: 0
     rx_missed_errors: 0
     tx_aborted_errors: 0
     tx_carrier_errors: 0
     tx_fifo_errors: 0
     tx_heartbeat_errors: 0
     tx_window_errors: 0
     tx_abort_late_coll: 0
     tx_deferred_ok: 0
     tx_single_coll_ok: 0
     tx_multi_coll_ok: 0
     tx_timeout_count: 0
     tx_restart_queue: 20
     rx_long_length_errors: 0
     rx_short_length_errors: 0
     rx_align_errors: 0
     tx_tcp_seg_good: 0
     tx_tcp_seg_failed: 0
     rx_flow_control_xon: 0
     rx_flow_control_xoff: 0
     tx_flow_control_xon: 0
     tx_flow_control_xoff: 0
     rx_long_byte_count: 8447367868
     rx_csum_offload_good: 99788365
     rx_csum_offload_errors: 117
     rx_header_split: 0
     alloc_rx_buff_failed: 0
     tx_smbus: 0
     rx_smbus: 0
     dropped_smbus: 0
     rx_dma_failed: 0
     tx_dma_failed: 0
root@shoot2:~# 
root@shoot2:~# cat /proc/mdstat 
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty] 
md2 : active raid1 sda3[0] sdb3[1]
      472760184 blocks super 1.2 [2/2] [UU]
      
md1 : active raid1 sda2[0] sdb2[1]
      976884 blocks super 1.2 [2/2] [UU]
      
md0 : active raid1 sda1[0] sdb1[1]
      14646200 blocks super 1.2 [2/2] [UU]
      
unused devices: <none>
root@shoot2:~# fdisk  -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000debbc

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        1824    14647296   fd  Linux raid autodetect
/dev/sda2            1824        1946      976896   fd  Linux raid autodetect
/dev/sda3            1946       60802   472761344   fd  Linux raid autodetect

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e88ab

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1        1824    14647296   fd  Linux raid autodetect
/dev/sdb2            1824        1946      976896   fd  Linux raid autodetect
/dev/sdb3            1946       60802   472761344   fd  Linux raid autodetect

Disk /dev/md0: 15.0 GB, 14997708800 bytes
2 heads, 4 sectors/track, 3661550 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table

Disk /dev/md1: 1000 MB, 1000329216 bytes
2 heads, 4 sectors/track, 244221 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/md1 doesn't contain a valid partition table

Disk /dev/md2: 484.1 GB, 484106428416 bytes
2 heads, 4 sectors/track, 118190046 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/md2 doesn't contain a valid partition table
root@shoot2:~# hdparm -t /dev/sda

/dev/sda:
 Timing buffered disk reads: 306 MB in  3.01 seconds = 101.82 MB/sec
root@hoot2:~# hdparm -t /dev/sdb

/dev/sdb:
 Timing buffered disk reads: 234 MB in  3.02 seconds =  77.43 MB/sec
root@niceshoot2:~# hdparm -T /dev/sda

/dev/sda:
 Timing cached reads:   16490 MB in  2.00 seconds = 8254.15 MB/sec
root@niceshoot2:~# hdparm -T /dev/sdb

/dev/sdb:
 Timing cached reads:   16876 MB in  2.00 seconds = 8447.67 MB/sec

--- EDIT
Okazuje się, że lagi występują w przypadku gdy wykonywane jest kopiowanie danych na serwerze, czyli wygląda na coś z dyskiem ... Ale jak widać, z dyskiem wszystko okey. Dlatego też zagatka ...

Ostatnio edytowany przez Grzeslaw (2010-12-17 14:15:51)

zielkam · 2010-12-17 22:50:55

Spróbuj z innym filesystemem. W moim przypadku pisanie logów z aplikacji powoduje tak duże obciążenie systemu, że aplikacja laguje. Zaczynam wszędzie stosować xfs`a, bo ext* i inne tego typu w takich wypadkach wypadają krucho.

Forum Debian Users Gang

Ogłoszenie

#1 2010-12-12 22:06:25

Grzeslaw - Użytkownik

HLDS i lagi [updated]

Kod:

Kod:

#2 2010-12-14 20:20:15

zielkam - były zielony_83 :)

Re: HLDS i lagi [updated]

Kod:

Kod:

Kod:

#3 2010-12-15 01:43:30

Grzeslaw - Użytkownik

Re: HLDS i lagi [updated]

Kod:

#4 2010-12-17 22:50:55

zielkam - były zielony_83 :)

Re: HLDS i lagi [updated]

Stopka forum