Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2009-10-09 18:27:16

  ethro - Użytkownik

ethro
Użytkownik
Zarejestrowany: 2009-09-25

Debian testing wieszający się X

Witam

Z tym problemem zmagam się od dłuższego czasu i prawdę powiedziawszy coraz bardziej mnie irytuje. Mianowicie po pewnym czasie pracy X zamiera, działa tylko kursor myszki. Operacje które rozpocząłem wcześniej, takie jak kopiowanie, działają dalej bez problemu. Nie mam też możliwości restartu serwera, klawiatura nie reaguje.
Największy problem to brak diagnozy, logi albo są czyste, albo ja nie potrafię nic znaleźć.
Fedora działa, windows działał (o tyle o ile :) ), xubuntu 8.10 zdechł. Problem nie jest zależny od środowiska, pojawia się z xorg.conf jak i z samym HAL, peryferia nie powodują problemu (przynajmniej myszka, tablet, dysk zewnętrzny).
na jajku 2.6.30-1-686 czasem się wiesza, na 2.6.30-2-686 wiesza się w parę sekund.
Zabawcie się w dr. Hausa i spróbujcie postawić diagnozę. Jeżeli jakiegoś loga trzeba, proszę pisać.

Mam laptopa amilo pro v 2000 karta grafiki intel 82852/82855

Za wszystkie pomysły z góry dzięki.

Offline

 

#2  2009-10-09 19:26:44

  skotx - Członek DUG

skotx
Członek DUG
Skąd: Olkusz
Zarejestrowany: 2008-01-22

Re: Debian testing wieszający się X

Wrzuć gdzieś etc/X11/xorg.conf oraz /var/log/Xorg.0.log. Stable,testing czy sid??
Czyli gdy serwer X jest wyłączony nie ma zawiechy??

Jeśli mam wysłuchiwać czyichś poglądów, to niech będą one wypowiedziane w formie twierdzącej, wątpliwości sam mam dosyć.

Offline

 

#3  2009-10-09 20:05:20

  ethro - Użytkownik

ethro
Użytkownik
Zarejestrowany: 2009-09-25

Re: Debian testing wieszający się X

Kod:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice     "pen"           "SendCoreEvents"
    InputDevice    "Synaptics Mouse" "CorePointer"



EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "record"
    Load  "dbe"
    Load  "glx"
    Load  "dri2"
    Load  "extmod"
    Load  "dri"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

   Section "Input Device"
            Identifier  "Synaptics Mouse"
            Driver      "synaptics"
            Option      "Device"              "/dev/psaux"
            Option      "Protocol"            "auto-dev"
            Option      "LeftEdge"            "1700"
            Option      "RightEdge"           "5300"
            Option      "TopEdge"             "1700"
            Option      "BottomEdge"          "4200"
            Option      "FingerLow"           "25"
            Option      "FingerHigh"          "30"
            Option      "MaxTapTime"          "180"
            Option      "MaxTapMove"          "220"
            Option      "MaxDoubleTapTime"    "360"
            Option      "FastTaps"            "on"
            Option      "VertScrollDelta"     "100"
            Option      "HorizScrollDelta"    "100"
            Option      "MinSpeed"            "0.09"
            Option      "MaxSpeed"            "0.18"
            Option      "AccelFactor"         "0.0015"
            Option      "EmulateMidButtonTime""100"
            Option      "EdgeMotionMinZ"      "30"
            Option      "EdgeMotionMaxZ"      "35"
            Option      "EdgeMotionMinSpeed"  "100"
            Option      "EdgeMotionMaxSpeed"  "150"
            Option      "EdgeMotionUseAlways" "off"
            Option      "TapButton1"          "1"
            Option      "RBCornerButton"      "3"
            Option      "LBCornerButton"      "2"
            Option      "CoastingSpeed"       "0.1"
            Option      "SHMConfig"           "on"
    EndSection

  Section "InputDevice"
           Identifier      "pen"
           Driver          "aiptek"
           Option          "Device"                "/dev/input/event8"
           Option          "Type"                  "stylus"
           Option          "Mode"                  "absolute"
           Option          "Cursor"                "stylus"
           Option          "PressCurve"            "hard"
           Option          "USB"                   "on"
           Option          "KeepShape"             "on"
           Option          "debuglevel"            "60"
           Option          "ZMin"                    "75"
           Option          "ZMax"                    "500"
           Option          "InputFashion"          "Tablet"
           Option          "Name"                  "Pentagram XXL"
           Option          "Vendor"                "Pentagram (Aiptek driver)"   
           Option          "AlwaysCore"            "On"
  EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor1"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82852/855GM Integrated Graphics Device"
    BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card1"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82852/855GM Integrated Graphics Device"
    BusID       "PCI:0:2:1"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen1"
    Device     "Card1"
    Monitor    "Monitor1"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

a to Xlog

Kod:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.6-dsa-ia32 i686 Debian
Current Operating System: Linux debian-ethro 2.6.30-1-686 #1 SMP Sat Aug 15 19:11:58 UTC 2009 i686
Build Date: 14 September 2009  05:23:17PM
xorg-server 2:1.6.3.901-1 (buildd@murphy.debian.org) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct  9 18:46:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "pen"
(**) |-->Input Device "Synaptics Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Duplicate core pointer devices.  Removing core pointer attribute from "Synaptics Mouse"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xa40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:3582:1734:1033 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xe0000000/524288, I/O @ 0x00001800/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 2.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "aiptek"
(II) Loading /usr/lib/xorg/modules/input//aiptek_drv.so
(II) Module aiptek: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xE0000000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 (48.4 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/lib/xorg/modules//libvgahw.so
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmGetBusid returned 'pci:0000:00:02.0'
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(EE) intel(1): [drm] failed to set drm interface version.
(EE) intel(1): Failed to become DRM master.
(==) intel(1): Depth 24, (--) framebuffer bpp 32
(==) intel(1): RGB weight 888
(==) intel(1): Default visual is TrueColor
(II) intel(1): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(1): Chipset: "852GM/855GM"
(EE) intel(1): No valid FB address in PCI config space
(II) UnloadModule: "intel"
(II) UnloadModule: "vgahw"
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) intel(0): Kernel reported 110080 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 440316 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
    (Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
    (Cannot allocate memory)
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x079f4000 (pgoffset 31220)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x079f5000 (pgoffset 31221)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x079f9000 (pgoffset 31225)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x079fa000 (pgoffset 31226)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x079fe000 (pgoffset 31230)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x007df000:            end of stolen memory
(II) intel(0): 0x007df000-0x079f3fff: DRI memory manager (116820 kB)
(II) intel(0): 0x079f4000-0x079f4fff: Core cursor (4 kB, 0x000000001dca4000 physical
)
(II) intel(0): 0x079f5000-0x079f8fff: ARGB cursor (16 kB, 0x000000001dcb4000 physical
)
(II) intel(0): 0x079f9000-0x079f9fff: Core cursor (4 kB, 0x000000001dcaa000 physical
)
(II) intel(0): 0x079fa000-0x079fdfff: ARGB cursor (16 kB, 0x000000001dc90000 physical
)
(II) intel(0): 0x079fe000-0x079fefff: overlay registers (4 kB, 0x000000001dcaf000 physical
)
(II) intel(0): 0x08000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007df000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x079f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 66 MHz
(WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(WW) intel(0):   Hardware claims pipe A is on while software believes it is off
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) xf86AiptekInit(): begins
(**) xf86AiptekConfig: device not shared btw pen and pen
(**) Option "AlwaysCore" "On"
(**) Option "SendCoreEvents"
(**) pen: always reports core events
(**) Option "Device" "/dev/input/event8"
(==) HID Device name: "Aiptek"
(==) HID Driver Version: 1.0.0
(==) HID Driver knows it has 1 devices configured
(==) HID Driver is using 12 as the fd
From ioctl() xCapacity=5999
From ioctl() yCapacity=4499
(**) pen device is /dev/input/event8
(**) Option "DebugLevel" "60"
(**) Debug level set to 60
(**) pen is in absolute mode
(**) Option "USB" "on"
(**) pen: reading USB link
(**) Option "KeepShape" "on"
(**) pen: keeps shape
(**) Option "ZMax" "500"
(**) pen: ZMax/MaxZ = 500
(**) Option "ZMin" "75"
(**) pen: ZMin/MinZ = 75
(**) Option "BaudRate" "9600"
(**) pen: BaudRate 9600
(**) pen: xf86AiptekInit() finished
(II) XINPUT: Adding extended input device "pen" (type: Stylus)
xf86AiptekProc() type=stylus flags=193 request=0
xf86AiptekProc request=INIT
xf86AiptekControlProc
In xf86AiptekOpenDevice, with fd=-1
(**) xTop invalid; adjusted to 0
(**) yTop invalid; adjusted to 0
(**) xBottom invalid; adjusted to 5999
(**) yBottom invalid; adjusted to 4499
(**) ScreenNo invalid; adjusted to 0
Screen 0: screenRatio = 1.33, tabletRatio = 1.33
Screen 0: 'X' Gap of 0 computed
xf86AiptekProc Success request=0
xf86AiptekProc() type=stylus flags=193 request=1
xf86AiptekProc request=ON
In xf86AiptekOpenDevice, with fd=-1
(==) HID Device name: "Aiptek"
(==) HID Driver Version: 1.0.0
(==) HID Driver knows it has 1 devices configured
(==) HID Driver is using 12 as the fd
From ioctl() xCapacity=5999
From ioctl() yCapacity=4499
Screen 0: screenRatio = 1.33, tabletRatio = 1.33
Screen 0: 'X' Gap of 0 computed
Able to open aiptek device
xf86AiptekProc Success request=1
(II) Synaptics touchpad driver version 1.1.2
(--) Synaptics Mouse auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(II) Synaptics Mouse: x-axis range 1472 - 5472
(II) Synaptics Mouse: y-axis range 1408 - 4448
(II) Synaptics Mouse: pressure range 0 - 255
(II) Synaptics Mouse: finger width range 0 - 0
(II) Synaptics Mouse: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "MaxDoubleTapTime" "360"
(**) Option "FastTaps" "on"
(**) Option "EmulateMidButtonTime" "100"
(**) Option "VertScrollDelta" "100"
(**) Option "HorizScrollDelta" "100"
(**) Option "EdgeMotionMinZ" "30"
(**) Option "EdgeMotionMaxZ" "35"
(**) Option "EdgeMotionMinSpeed" "100"
(**) Option "EdgeMotionMaxSpeed" "150"
(**) Option "EdgeMotionUseAlways" "off"
(**) Option "RBCornerButton" "3"
(**) Option "LBCornerButton" "2"
(**) Option "TapButton1" "1"
(**) Option "MinSpeed" "0.09"
(**) Option "MaxSpeed" "0.18"
(**) Option "AccelFactor" "0.0015"
(**) Option "CoastingSpeed" "0.1"
(--) Synaptics Mouse: touchpad found
(**) Option "CorePointer" "False"
(**) Synaptics Mouse: doesn't report core events
(II) XINPUT: Adding extended input device "Synaptics Mouse" (type: TOUCHPAD)
(**) Synaptics Mouse: (accel) keeping acceleration scheme 1
(**) Synaptics Mouse: (accel) filter chain progression: 2.00
(**) Synaptics Mouse: (accel) filter stage 0: 20.00 ms
(**) Synaptics Mouse: (accel) set acceleration profile 0
(--) Synaptics Mouse: touchpad found
(II) config/hal: Adding input device Aiptek
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Aiptek: always reports core events
(**) Aiptek: Device: "/dev/input/event8"
(II) Aiptek: Found 3 mouse buttons
(II) Aiptek: Found x and y relative axes
(II) Aiptek: Found scroll wheel(s)
(II) Aiptek: Found x and y absolute axes
(II) Aiptek: Found absolute touchpad
(II) Aiptek: Found keys
(II) Aiptek: Configuring as touchpad
(II) Aiptek: Configuring as keyboard
(**) Aiptek: YAxisMapping: buttons 4 and 5
(**) Aiptek: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Aiptek" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "fscaa1667g"
(**) Option "xkb_layout" "pl"
(WW) Aiptek: touchpads and touchscreens ignore relative axes.
(**) Aiptek: (accel) keeping acceleration scheme 1
(**) Aiptek: (accel) filter chain progression: 2.00
(**) Aiptek: (accel) filter stage 0: 20.00 ms
(**) Aiptek: (accel) set acceleration profile 0
(II) Aiptek: initialized for absolute axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "fscaa1667g"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event1"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "fscaa1667g"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "fscaa1667g"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event6"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "fscaa1667g"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event2"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) USB Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 (48.4 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 (48.4 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)

Zapomniałem dopisać, testing. W trybie tekstowym nic nie wiesza.

Ostatnio edytowany przez ethro (2009-10-09 20:07:19)

Offline

 

#4  2009-10-10 18:56:24

  skotx - Członek DUG

skotx
Członek DUG
Skąd: Olkusz
Zarejestrowany: 2008-01-22

Re: Debian testing wieszający się X

Ja bym zrobił tak: obadałbym czy na vesie się wiesza, może to wina sterowników (o intelowskich nie mam pojęcia, jak większość mam nv). Jak to nie pomoże to w xorg.conf zostawiłbym minimalne wpisy do odpalenia środowiska graficznego i spróbowałbym na sterach intela i vesie czy się dalej wiesza. Na razie nie mam więcej pomysłów.

Jeśli mam wysłuchiwać czyichś poglądów, to niech będą one wypowiedziane w formie twierdzącej, wątpliwości sam mam dosyć.

Offline

 

#5  2009-10-10 20:26:37

  marg1 - Gentoowy Głupek

marg1
Gentoowy Głupek
Skąd: Bytom
Zarejestrowany: 2009-05-15

Re: Debian testing wieszający się X

Gdybym się nie chciał wyrychlać, to napisałbym, żebyś spróbował odpalić bez xorg.conf zmieniając mu nazwę jako root:)

Kod:

mv /etc/X11/xorg.conf /etc/X11/xorg.conf.new

I jako użytkownik odpal X:

Kod:

startx

Może się uda :)

Ostatnio edytowany przez marg1 (2009-10-10 20:34:41)

marg1@jid.dug.net.pl
Linux User Registration Number: #488674
CISCO CCNA Alumni :)

Offline

 

#6  2009-10-11 22:08:26

  gindek - Zubr, bydle na etacie.

gindek
Zubr, bydle na etacie.
Skąd: Z puszczy.
Zarejestrowany: 2008-12-08

Re: Debian testing wieszający się X

masz odpalonego compiza/beryla lub jakiekolwiek inne "bajery" ?

" Wojny przychodzą i odchodzą, a moi żołnierze są wieczni"


"Zbuduj mały, dziarski router z udostępnionych przez prowadzącego części od Kamaza?"

Offline

 

#7  2009-10-12 20:48:22

  iwo - Użytkownik

iwo
Użytkownik
Skąd: 51.770 N, 19.459 E
Zarejestrowany: 2006-11-20

Re: Debian testing wieszający się X

a mnie nawet reinstalowany gdm nie wstaje... kurna co jest

Ostatnio edytowany przez iwo (2009-10-12 20:48:37)

Iwo - Linux user numer #457448

Offline

 

#8  2009-10-13 05:13:36

  ethro - Użytkownik

ethro
Użytkownik
Zarejestrowany: 2009-09-25

Re: Debian testing wieszający się X

Problem nie leży po stronie xorg.conf. Wiesza się pod HAL jak i korzystając z xorg.conf. Compizów bajerozów też nie mam.

Offline

 

#9  2009-10-13 17:54:04

  gindek - Zubr, bydle na etacie.

gindek
Zubr, bydle na etacie.
Skąd: Z puszczy.
Zarejestrowany: 2008-12-08

Re: Debian testing wieszający się X

Dobrze bylo wy wyeliminowac problem sprzetowy, przetestowac grafike jakims 3dmarkiem ale windy niestety nie masz.
Ale za to mozna przynajmniej sprawdzic dysk i ram, sciagnij hiren's boot cd i przetestuj ram i dysk ( np. memtest, czy test hd drive). Dobrze bylo by tez przetestowac sprzet pod duzym obciazeniem, na windzie zrobil bym to prime, ale jak na linuksie to zrobic to nie mam pojecia xd.
Sciagnij sysv-rc-conf i powylaczaj wszystko co sie da ( od drukarek przez bluetooth do Bóg wie czego xd), moze ktores procesy sie gryza ze soba ( ja mialem taki problem).

Ostatnio edytowany przez gindek (2009-10-13 18:01:16)

" Wojny przychodzą i odchodzą, a moi żołnierze są wieczni"


"Zbuduj mały, dziarski router z udostępnionych przez prowadzącego części od Kamaza?"

Offline

 

#10  2009-10-14 05:28:10

  ethro - Użytkownik

ethro
Użytkownik
Zarejestrowany: 2009-09-25

Re: Debian testing wieszający się X

Dzięki za radę, ale testowałem i odłączałem już nieraz. Na razie nie mogę nic znaleźć po stronie sprzętu. W moim laptopie więcej już nie odłącze, swego czasu winda chodziła bez zwiech (O ile można nazwać mulenie w2000 przy 512 ram) fedora też, albo to kwestia przypadku bo była u mnie tylko 3 dni.

Kernel 2.6.30-1 i wyżej sypie i tyle. Najlepiej działa 2.6.30-1  z siduxa ale i tak od czasu do czasu wali zwiechę. 2.6.30-5 to wiesza już przy logowaniu w gdm. Próbowałem sam kompilować jądro ale opornie to idzie, jak do tej pory nie wygenerowałem nawet initramfs.

Macie jakieś pomysły?

Ostatnio edytowany przez ethro (2009-11-04 16:04:59)

Offline

 

#11  2009-11-07 14:58:43

  vascom - Użytkownik

vascom
Użytkownik
Zarejestrowany: 2009-11-07

Re: Debian testing wieszający się X

Witam.
Mam dokładnie ten sam problem i śmiem twierdzić iż sterowniki intela w testing, unstable są po prostu do dupy.

Borykając się z tym problemem na sid`zie stweirdziłem że zainstaluje Lenny`ego. Zainstalowałem było prawie ok ale drażniła mnie pamieciożerność Xorga jak i calego systemu (230mb na starcie gdzie sid potrzebuje tylko 120). Wymieszałem repo Lenny+Squeeze zainstalowałem nowego xorg`a, stery intela... I oczywiście zwis.
Pobawiłem się sysv, wyrzuciłem praktycznie wszystko niby lepiej ale zwisy jak były tak są.

Jak na razie jade na "vesa" szukajac rozwiązania tego problemu

Pozdrawiam.

Ostatnio edytowany przez vascom (2009-11-07 15:02:42)

Offline

 

#12  2009-11-07 15:13:02

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: Debian testing wieszający się X

Debian testing line, jajo z repo 2.6.30-1-686 (jeszcze mi się nie chciało przkompilować nowego), karta graficzna Intel Corporation 82852/82855 GM/GME/PM/GMV procek Centrino M 1.6,

Kod:

]:-> dpkg -l G xorg
ii  xserver-xorg                         1:7.4+4                        the X.Org X server
ii  xserver-xorg-core                    2:1.6.5-1                      Xorg X server - core server
ii  xserver-xorg-input-evdev             1:2.2.5-1                      X.Org X server -- evdev input driver
ii  xserver-xorg-input-kbd               1:1.3.2-4                      X.Org X server -- keyboard input driver
ii  xserver-xorg-input-mouse             1:1.4.0-4                      X.Org X server -- mouse input driver
ii  xserver-xorg-video-fbdev             1:0.4.0-4                      X.Org X server -- fbdev display driver
ii  xserver-xorg-video-intel             2:2.9.0-1                      X.Org X server -- Intel i8xx, i9xx display d

Kod:

]:-> dpkg -l G hal               
ii  hal                                  0.5.13-3                       Hardware Abstraction Layer
ii  hal-info                             20090716-1                     Hardware Abstraction Layer - fdi files
ii  libhal-storage1                      0.5.13-3                       Hardware Abstraction Layer - shared library 
ii  libhal1                              0.5.13-3                       Hardware Abstraction Layer - shared library

Kod:

]:-> dpkg -l G dbus
ii  dbus                                 1.2.16-2                       simple interprocess messaging system
ii  dbus-x11                             1.2.16-2                       simple interprocess messaging system (X11 de
ii  libdbus-1-3                          1.2.16-2                       simple interprocess messaging system
ii  libdbus-1-dev                        1.2.16-2                       simple interprocess messaging system (develo
ii  libdbus-glib-1-2                     0.82-2                         simple interprocess messaging system (GLib-b
ii  libeggdbus-1-0                       0.5-2                          D-Bus bindings for GObject
ii  libpolkit-dbus2                      0.9-4                          library for accessing PolicyKit via D-Bus
ii  libqt4-dbus                          4:4.5.3-4                      Qt 4 D-Bus module

Kod:

]:-> cat /etc/X11/xorg.conf
Section "InputDevice" 
 Identifier "Generic Keyboard" 
 Driver "kbd" 
 Option "CoreKeyboard" 
 Option "XkbRules" "xorg" 
 Option "XkbModel" "pc105" 
 Option "XkbLayout" "pl" 
EndSection 

Section "InputDevice"
 Identifier "TouchPad"
 Driver "mouse"
 Option "Emulate3Buttons" "true"
EndSection

Section "ServerFlags"
 Option "AutoAddDevices" "false"
EndSection

i wsyztko działa idealnie - zero zawiasów (czasami chwilowe zamrożenia ale tylko przy duzym obciążeniu), zuzycie pamięci w normie (po starcie systemu conky pokazuje ~40MB ale sporo bajerów mi się odpala) może gdzieś w którjeś  z tych paczek jest problem.

LRU: #472938
napisz do mnie: ola@mojmail.eu
Hołmpejdż | Galerie | "Twórczość" || Free Image Hosting

Offline

 

#13  2009-11-07 15:51:36

  vascom - Użytkownik

vascom
Użytkownik
Zarejestrowany: 2009-11-07

Re: Debian testing wieszający się X

Sprawdzałem paczki które podałeś i okazało się że u mnie dwóch z nich brakowało
xserver-xorg-video-fbdev
libdbus-1-dev
kilka jest o jedno oczko wyżej (podejrzewam że dzisiejsza aktualizacja)

Jeszcze jakbyś mógł podać cały konfig xorg`a byłbym wdzięczny.

Offline

 

#14  2009-11-07 16:02:48

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: Debian testing wieszający się X

vascom to jest mój cały xorg.conf ;)) reszta leci na halu. Mialem problemy z klawiaturą więc musiałem ręcznie wymusić na nim takie ustawienia. A dzisiaj przy aktualizacji to nie aktualizowało mi tylko perlowy parser html'a. Spróbuj zrobić aktualizację. Może faktycznie pomoże. Co do paczki developrerskiej dbusa to AFAIR nie jest Ci niezbędna - ja musiałem zainstalować przy jakiejś tam kompilacji jako zależność.

LRU: #472938
napisz do mnie: ola@mojmail.eu
Hołmpejdż | Galerie | "Twórczość" || Free Image Hosting

Offline

 

#15  2009-11-07 16:10:10

  vascom - Użytkownik

vascom
Użytkownik
Zarejestrowany: 2009-11-07

Re: Debian testing wieszający się X

winnetou napisał(-a):

vascom to jest mój cały xorg.conf ;)) reszta leci na halu.

Ok zobaczymy co u mnie z tego wyjdzie:)

winnetou napisał(-a):

Spróbuj zrobić aktualizację.

Nie zrozumieliśmy się, ja jestem po aktualizacji i np:
u Ciebie hal w wersji 0.5.13-3 to ja mam 0.5.13-4

Offline

 

#16  2009-11-07 16:16:06

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: Debian testing wieszający się X

A w ten deseń ;)) Bawiłeś sie w instalację paczek z SIDa ? Jak tak to może jakieś pozostałości. Ja pusciłem aktualizację i nic mi nie znalazł...

LRU: #472938
napisz do mnie: ola@mojmail.eu
Hołmpejdż | Galerie | "Twórczość" || Free Image Hosting

Offline

 

#17  2009-11-07 16:31:04

  vascom - Użytkownik

vascom
Użytkownik
Zarejestrowany: 2009-11-07

Re: Debian testing wieszający się X

No właśnie w tym momencie siedze na sid`zie:) Lenny+sqeeze potem będe poprawiał jak na razie sprawdzam sid`a:) Od 18 min działa :)

EDIT
No coż po 45min zawisł ale nie jestem pewny czy go audacious nie powiesił bo uruchamiając go nie odpalił się a kilka sek. później zawisł

EDIT2
Niestety tym razem wytrzymał jakieś 30min :(

Ostatnio edytowany przez vascom (2009-11-07 17:41:09)

Offline

 

#18  2009-11-15 15:57:48

  ethro - Użytkownik

ethro
Użytkownik
Zarejestrowany: 2009-09-25

Re: Debian testing wieszający się X

Może będę miał dobre wiadomości.  Siedzę na sidzie od pół godziny na jądrze 2.6.30.1 sidux, akceleracja  EXA i nie wiesza się nic, a obciążam jak mogę. Potestuję i doniosę jak się sprawy mają.


Sprawy źle się mają, zwisy jak były tak są.
https://bugs.launchpad.net/ubuntu/+source/xserver-x … l/+bug/345119
Problem jest wszechobecny, i raczej nie zachęca.

Ostatnio edytowany przez ethro (2009-11-17 14:30:41)

Offline

 

#19  2009-11-17 17:31:48

  vascom - Użytkownik

vascom
Użytkownik
Zarejestrowany: 2009-11-07

Re: Debian testing wieszający się X

ethro napisał(-a):

Problem jest wszechobecny, i raczej nie zachęca.

Dokładnie tak jak mówisz wogóle nie zachęca, ja zainstalowałem Lenny, wymieszałem repo od squeeze przyszpilając xorg`a i stery intela z wersji Lenny i oczywiście wszystko ładnie chodzi wystarczyło odpineskować xorg`a, stery podnieść ich wersje do tej z aqueeze i problem na nowo.
Niestety jestem zmuszony obejść się smakiem jeśli chodzi o sid`a.

P.S. Namówiłem szwagra na instalacje debiana na desktopie z karta Ati, wpakuje mu sid`a i zapewne będzie działał prawidłowo :(

Offline

 

#20  2009-11-19 11:17:57

  ethro - Użytkownik

ethro
Użytkownik
Zarejestrowany: 2009-09-25

Re: Debian testing wieszający się X

Wczoraj zainstalowałem lennego i upgradowłam squeeze sid zostawiając wszystkie Xy z lennego. Dzisiaj skompilowałem kernel do swoich potrzeb wszystko śmiga i świeci, jeszcze tylko ustawienia konta sobie przeniose i koniec na razie kłopotów :). Znowu będę chodził po domu jak głupi bo mi system będzie działał jak trzeba.

Offline

 

#21  2009-11-19 11:34:15

  vascom - Użytkownik

vascom
Użytkownik
Zarejestrowany: 2009-11-07

Re: Debian testing wieszający się X

ethro napisał(-a):

Znowu będę chodził po domu jak głupi bo mi system będzie działał jak trzeba.

Taki mały OT.
Ja sobie znalazłem nową zabawke, czyli fluxbox`a :D

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)