Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#51  2009-10-08 19:23:07

  ippo76 - fakam fszycho

ippo76
fakam fszycho
Zarejestrowany: 2009-02-22
Serwis

Re: Po dzisiejszej aktualizacji nie działa myszka i klawiatura - sidux

ilin napisał(-a):

To że napisałem jak komuś oprogramowanie w lennym wydaje się za stare to ma zrobić upgraid do squeeze ?

Uhm


W tym wątku mówimy o sidzie.
Tutaj trzeba być przygotowany na różne niespodzianki choć zbyt czesto one się też nie zdarzają.
W innych dystrybucjach w wersji stable czasem częściej się trafi.

Prawda. Ja tylko uważam, że -choć sam się na to nie zdecyduję - ktoś musi testować pakiety :) Ale warto mieć w rezerwie stabilny system, na co zwróciłeś uwagę.
Już nie offtopuję.


ippo76@jid.dug.net.pl

Moja składka do ZUS = 2/3, moja składka do OFE = 1/3;
Stan mojego konta w ZUS = 2XYZ, stan konta w OFE = 3XYZ.

Offline

 

#52  2009-10-09 09:33:33

  marg1 - Gentoowy Głupek

marg1
Gentoowy Głupek
Skąd: Bytom
Zarejestrowany: 2009-05-15

Re: Po dzisiejszej aktualizacji nie działa myszka i klawiatura - sidux

Ja mam w rezerwie windowsa :)
Paowie, szkoda nerwów, format C:
4 min 33 sekundy i znowu mam siduxa :)
jestem ciekaw czy znowu się to samo zrobi po upgradzie, ale nie na tyle, żeby teraz upgradować :)

Dla tych co nie śłedzą::)

Zrobiłem tak:
zaholdowałem 2 pakiety:

Kod:

aptitude hold libkeyutilis1 libkeyutilis-dev

i wykonałem upgrade.w trybie tekstowym
potem zainstalowałem te pakiety i nic sie nie stało, wszystko działa :)
Pakiety są w nowych wersjach:

Kod:

root@siduxbox:/home/marg1# aptitude show libkeyutils1
Pakiet: libkeyutils1
Stan: zainstalowany
Zainstalowany automatycznie: nie
Wersja: 1.2-12
Priorytet: standardowy
Sekcja: libs
Opiekun: Daniel Baumann <daniel@lists.debian-maintainers.org>
Rozmiar rozpakowanego: 57,3k
Wymaga: libc6 (>= 2.2.5)
Opis: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.

 This package provides a wrapper library for the key management facility system
 calls.
Strona domowa: http://people.redhat.com/~dhowells/keyutils/

Kod:

root@siduxbox:/home/marg1# aptitude show  libkeyutils-dev
Pakiet: libkeyutils-dev
Stan: zainstalowany
Zainstalowany automatycznie: nie
Wersja: 1.2-12
Priorytet: opcjonalny
Sekcja: libdevel
Opiekun: Daniel Baumann <daniel@lists.debian-maintainers.org>
Rozmiar rozpakowanego: 123k
Wymaga: libkeyutils1 (= 1.2-12)
Opis: Linux Key Management Utilities (development)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.

 This package contains the development files.
Strona domowa: http://people.redhat.com/~dhowells/keyutils/

Wszystko dziła myszka klwiatura grafika:
xorg.conf na którym działa:

Kod:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder58)  Fri Aug 14 18:34:43 PDT 2009                                                                         

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Fri Aug 14 18:33:37 PDT 2009                                                                          
# /etc/X11/xorg.conf (Xorg X Window System server configuration file)           
#                                                                               
# This file was generated by fll_xorgconfig, the F.U.L.L.S.T.O.R.Y.             
# Xorg Configuration tool.                                                      
#                                                                               
# Edit this file with caution, and see the xorg.conf(5) manual page.            
# (Type "man xorg.conf" at the shell prompt.)                                   
#                                                                               

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0   
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"    
EndSection                                   

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection                       

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard" 
EndSection                    

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0" 
    Driver         "mouse"  
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"  
EndSection                               

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown" 
    ModelName      "Gateway FPD1960"
    HorizSync       30.0 - 80.0
    VertRefresh     60.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device 0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600 GTS"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Device 0"
    Monitor        "Monitor0"
    SubSection     "Display"
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024_75 +0+0; nvidia-auto-select +0+0; 1280x1024 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Mogę spróbować uruchomić bez xorga :)

Kod:

oot@siduxbox:/home/marg1# lshal |grep input
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  info.addons.singleton = {'hald-addon-input'} (string list)    
  info.capabilities = {'input', 'button', 'input.keys'} (string list)
  info.category = 'input'  (string)                                  
  info.subsystem = 'input'  (string)                                 
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)                                                                               
  input.device = '/dev/input/event4'  (string)                                  
  input.product = 'Power Button'  (string)                                      
  input.x11_driver = 'evdev'  (string)                                          
  input.xkb.layout = 'us'  (string)                                             
  input.xkb.model = 'pc105'  (string)                                           
  input.xkb.options = 'lv3:ralt_switch,compose:lwin'  (string)                  
  input.xkb.rules = 'base'  (string)                                            
  linux.device_file = '/dev/input/event4'  (string)                             
  linux.subsystem = 'input'  (string)                                           
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4'  (string)                                                              
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'                
  access_control.file = '/dev/input/event0'  (string)                           
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)  
  info.category = 'input'  (string)                                             
  info.subsystem = 'input'  (string)                                            
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)                                                                               
  input.device = '/dev/input/event0'  (string)                                  
  input.product = 'Macintosh mouse button emulation'  (string)                  
  input.x11_driver = 'evdev'  (string)                                          
  linux.device_file = '/dev/input/event0'  (string)                             
  linux.subsystem = 'input'  (string)                                           
  linux.sysfs_path = '/sys/devices/virtual/input/input0/event0'  (string)       
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'                  
  info.addons.singleton = {'hald-addon-input'} (string list)                    
  info.capabilities = {'input', 'button', 'input.keys'} (string list)           
  info.category = 'input'  (string)                                             
  info.subsystem = 'input'  (string)                                            
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string) 
  input.device = '/dev/input/event3'  (string)                                  
  input.product = 'Power Button'  (string)                                      
  input.x11_driver = 'evdev'  (string)                                          
  input.xkb.layout = 'us'  (string)                                             
  input.xkb.model = 'pc105'  (string)                                           
  input.xkb.options = 'lv3:ralt_switch,compose:lwin'  (string)                  
  input.xkb.rules = 'base'  (string)                                            
  linux.device_file = '/dev/input/event3'  (string)                             
  linux.subsystem = 'input'  (string)                                           
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3'  (string)                                                                       
udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'           
  info.capabilities = {'input'} (string list)                                   
  info.category = 'input'  (string)                                             
  info.subsystem = 'input'  (string)                                            
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)                                                                          
  input.device = '/dev/input/event5'  (string)                                  
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)                                                                           
  input.product = 'PC Speaker'  (string)                                        
  linux.device_file = '/dev/input/event5'  (string)                             
  linux.subsystem = 'input'  (string)                                           
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input5/event5'  (string)                                                                               
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'                                                                             
  access_control.file = '/dev/input/event6'  (string)                           
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)  
  info.category = 'input'  (string)                                             
  info.subsystem = 'input'  (string)                                            
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)                                                            
  input.device = '/dev/input/event6'  (string)                                  
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)                                                             
  input.product = 'ImPS/2 Logitech Wheel Mouse'  (string)                       
  input.x11_driver = 'evdev'  (string)                                          
  linux.device_file = '/dev/input/event6'  (string)                             
  linux.subsystem = 'input'  (string)                                           
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input6/event6'  (string)                                                                         
udi = '/org/freedesktop/Hal/devices/usb_device_1241_1203_noserial_if1_logicaldev_input'                                                                         
  info.addons.singleton = {'hald-addon-input'} (string list)                    
  info.capabilities = {'input', 'input.keys', 'button'} (string list)           
  info.category = 'input'  (string)                                             
  info.subsystem = 'input'  (string)                                            
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1203_noserial_if1_logicaldev_input'  (string)                                                        
  input.device = '/dev/input/event2'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1241_1203_noserial_if1'  (string)
  input.product = 'HID 1241:1203'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.options = 'lv3:ralt_switch,compose:lwin'  (string)
  input.xkb.rules = 'base'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.1/input/input2/event2'  (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1241_1203_noserial_if0_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1203_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event1'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1241_1203_noserial_if0'  (string)
  input.product = 'HID 1241:1203'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.options = 'lv3:ralt_switch,compose:lwin'  (string)
  input.xkb.rules = 'base'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input1/event1'  (string)

Kod:

root@siduxbox:/home/marg1# hald --daemon=no --verbose=yes
17:50:31.633 [i] hald.c:680: hal 0.5.13
17:50:31.633 [i] hald.c:681: using child timeout 250s
17:50:31.633 [i] hald.c:746: Will not daemonize
17:50:31.634 [i] hald_dbus.c:5421: local server is listening at unix:abstract=/var/run/hald/dbus-15mnEYcowD,guid=a10b34acf8904eea4948f90a4acf5bc7
17:50:31.638 [i] ck-tracker.c:391: got seat '/org/freedesktop/ConsoleKit/Seat1'
17:50:31.638 [i] ck-tracker.c:321: got session '/org/freedesktop/ConsoleKit/Session1' for seat '/org/freedesktop/ConsoleKit/Seat1'
17:50:31.641 [i] ck-tracker.c:274: Got active state (ACTIVE) and uid 1000 on session '/org/freedesktop/ConsoleKit/Session1'
17:50:31.641 [i] ck-tracker.c:342: Got all sessions on seat '/org/freedesktop/ConsoleKit/Seat1'
17:50:31.641 [i] ck-tracker.c:418: Got seats
17:50:31.641 [i] ck-tracker.c:816: Got seats and sessions
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
17:50:31.645 [i] hald_runner.c:301: Runner has pid 2554
17:50:31.646 [i] hald_runner.c:182: runner connection is 0x917430
17:50:31.646 [W] osspec.c:387: Unable to open /proc/mdstat: No such file or directory
17:50:31.651 [i] mmap_cache.c:278: cache mtime is 1255102176
Error binding udev_event socket: Address already in use

Ale to wszystko przy uruchomionych X-sach, ale hal chyba w porządku, próbuje uruchomić bez xorga:)

Działa fajnie bez xorg.conf wszystko, no to ja nie wiem, co było grane...
Pozostało mi już tylko zrobienie

Kod:

aptitude full-upgrade

Ostatnio edytowany przez marg1 (2009-10-09 18:24:08)


marg1@jid.dug.net.pl
Linux User Registration Number: #488674
CISCO CCNA Alumni :)

Offline

 

#53  2011-06-12 01:13:31

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk/kalmar
Zarejestrowany: 2004-12-28

Re: Po dzisiejszej aktualizacji nie działa myszka i klawiatura - sidux

ale suchara wykopałem :P

trafiłem na ten wątek przez guglownicę, bo miałem problem jak w temacie - klawiatura i mysz bez reakcji pod X

logi z /var/log/Xorg.0.log zupełnie nie pomagają

Kod:

(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0

rozwiązaniem było wkompilowanie w jajko dodatkowych eventow:
device drivers --> input device support --> event interface
w distrowym chyba jest defaultowo, ale kto używa jajca z distro :P


linux regd. user #248790

Offline

 

#54  2011-06-12 08:10:17

  Bodzio - Ojciec Założyciel

Bodzio
Ojciec Założyciel
Skąd: Gorlice
Zarejestrowany: 2004-04-17
Serwis

Re: Po dzisiejszej aktualizacji nie działa myszka i klawiatura - sidux

Bo Ty strasznie cieniutkie jądra stosujesz. Pamiętam Twój pierwszy config co mi go przesłałeś, to był ubożuchny jak pomoc społeczna w tym kraju :D


Debian jest lepszy niż wszystkie klony
Linux register users: #359018
http://www.freebsd.org/gifs/powerlogo.gif
Beskid Niski

Offline

 

#55  2011-06-12 08:37:38

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Po dzisiejszej aktualizacji nie działa myszka i klawiatura - sidux

rychu napisał(-a):

device drivers --> input device support --> event interface

To przecież evdev jest, mysz/klawiatura domyślnie jadą na tym od lat. :P

Jak korzystasz z automagii, to korzystasz właśnie z evdeva (potrzebny też pakiet xserver-xorg-input-evdev). Jeśli chcesz korzystać ze sterów xserver-xorg-input-kbd i xserver-xorg-input-mouse, to automagię musisz wyłączyć i zdefiniować je w xorg.conf / xorg.conf.d/*.

Offline

 

#56  2011-06-12 10:25:19

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk/kalmar
Zarejestrowany: 2004-12-28

Re: Po dzisiejszej aktualizacji nie działa myszka i klawiatura - sidux

ArnVaker napisał(-a):

To przecież evdev jest, mysz/klawiatura domyślnie jadą na tym od lat. :P

hm no dobra, w takim razie chyba nikt więcej na tą minę nie powinien wpaść :P

@Bodzio: no bo to taka polityka: wrzucasz do jądra to co musi być, reszta out.


linux regd. user #248790

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)