Forum Debian Users Gang

Contravene · 2009-04-24 11:15:02

Karta to Intel Corporation PRO/Wireless 4965 AG or AGN. Mam problem z podniesieniem jej.

Kod:

# ifup wlan0
Ignoring unknown interface wlan0=wlan0.
# iwconfig wlan0 mode managed
# iwconfig wlan0 essid xxxxxxx
# iwconfig wlan0 enc xxxxxxxxxxxxxxxxxxxxxxxxxx
# iwconfig wlan0 channel 13
# ifup wlan0
Ignoring unknown interface wlan0=wlan0.
# iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wmaster0  Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down
# ifconfig wlan0 up
SIOCSIFFLAGS: Nie ma takiego pliku ani katalogu

Kod:

[b]# lspci -k[/b]
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. Asus M51S series
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 04)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 04)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 04)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 04)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 04)
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel modules: iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: PIIX_IDE
        Kernel modules: piix
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: ahci
        Kernel modules: ahci
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M G (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device 17c2
        Kernel modules: nvidiafb
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
        Subsystem: ASUSTeK Computer Inc. Device 14e5
        Kernel driver in use: atl1
        Kernel modules: atl1
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
        Subsystem: Intel Corporation Device 1101
        Kernel driver in use: iwl4965
        Kernel modules: iwl4965
09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: ohci1394
        Kernel modules: ohci1394
09:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
        Kernel driver in use: sdhci
        Kernel modules: sdhci
09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
        Subsystem: ASUSTeK Computer Inc. Device 14e7
09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
        Subsystem: ASUSTeK Computer Inc. Device 14e7

Ostatnio edytowany przez Contravene (2009-04-24 11:16:00)

Lacer · 2009-04-24 11:18:12

a masz zainstalowany firmware do intela?
to jest pakiet: firmware-iwlwifi

0dd · 2009-04-24 11:33:39

wklej

Kod:

ifconfig -a

Contravene · 2009-04-24 14:21:59

Lacer napisał(-a):
a masz zainstalowany firmware do intela?
to jest pakiet: firmware-iwlwifi

Ok, zainstalowałem i nie pojawia się komunikat o braku pliku. Czyli już do przodu.
Interfejsty konfiguruje w ten sposób:

Kod:

auto wlan0
iface wlan0 inet dhcp
  wireless-essid xxxxx
  wireless-key xxxxxxxxxxxxxxxxxxxxxxxxxx
  wireless-mode Managed
  dns-nameservers 192.168.0.12 xx.xx.xx.xx

Niestety podczas wyszukiwania serwera dhcp:
# /etc/init.d/networking restart

Kod:

Reconfiguring network interfaces...There is already a pid file /var/run/dhclient.eth0.pid with pid 2816
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/eth0/00:23:54:36:1c:d6
Sending on   LPF/eth0/00:23:54:36:1c:d6
Sending on   Socket/fallback
DHCPRELEASE on eth0 to 192.168.0.12 port 67
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:1f:3b:c3:e6:cb
Sending on   LPF/wlan0/00:1f:3b:c3:e6:cb
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 2
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.

# ifconfig -a

Kod:

eth0      Link encap:Ethernet  HWaddr 00:23:54:36:1c:d6
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:546 errors:0 dropped:0 overruns:0 frame:0
          TX packets:545 errors:0 dropped:0 overruns:0 carrier:4
          collisions:0 txqueuelen:1000
          RX bytes:403444 (393.9 KiB)  TX bytes:92503 (90.3 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:98 errors:0 dropped:0 overruns:0 frame:0
          TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6456 (6.3 KiB)  TX bytes:6456 (6.3 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:1f:3b:c3:e6:cb
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0:avahi Link encap:Ethernet  HWaddr 00:1f:3b:c3:e6:cb
          inet addr:169.254.11.110  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1

wmaster0  Link encap:UNSPEC  HWaddr 00-1F-3B-C3-E6-CB-6C-6F-00-00-00-00-00-00-00-00
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Lacer · 2009-04-24 22:35:16

a pokaz jeszcze iwconfig
wg mnie najwygodniej byłoby jakbys zainstalował wicd to wtedy bezproblemo będziesz mógł połączyć się z każdą siecią
sam używam na lapciaku i jestem zadowolony :)

pozdrawiam
miłosz

k4misiek · 2009-04-25 10:24:26

Ja polecam wpasupplicant(wraz z gui) + ifplugd ;-)

Ostatnio edytowany przez sp3cu (2009-04-25 10:24:46)

Contravene · 2009-04-27 09:16:24

Lacer napisał(-a):
wg mnie najwygodniej byłoby jakbys zainstalował wicd to wtedy bezproblemo będziesz mógł połączyć się z każdą siecią
sam używam na lapciaku i jestem zadowolony :)

Zainstalowalem, dziala pięknie. Wygodnie można skanować i wybierać sieć do połączenia. Dzięki.

sp3cu napisał(-a):
Ja polecam wpasupplicant(wraz z gui) + ifplugd ;-)

Zainstalowałem, interfejs ładniejszy od wicd, ale ma jakieś problemy z pozyskaniem statusu od wpa_supplicant, więc pozostanę przy wicd.

k4misiek · 2009-05-01 12:45:29

Contravene napisał(-a):
sp3cu napisał(-a):
Ja polecam wpasupplicant(wraz z gui) + ifplugd ;-)
Zainstalowałem, interfejs ładniejszy od wicd, ale ma jakieś problemy z pozyskaniem statusu od wpa_supplicant, więc pozostanę przy wicd.

Musisz dodać do wpa_supplicant.conf
ctrl_interface_group=wheel
oraz siebie do grupy wheel

szela · 2009-06-06 18:58:23

ja mam pytanie bo po wpisaniu komendy: ifconfig -a w ogole nie mam wifi:( co mam zrobic?

eth0 Link encap:Ethernet HWaddr 00:1e:68:ab:68:a7
inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21e:68ff:feab:68a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14715 errors:0 dropped:0 overruns:0 frame:0
TX packets:10026 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19193385 (18.3 MiB) TX bytes:797194 (778.5 KiB)
Interrupt:29 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:88 errors:0 dropped:0 overruns:0 frame:0
TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5488 (5.3 KiB) TX bytes:5488 (5.3 KiB)

ilin · 2009-06-06 18:59:42

Pokaz

Kod:

iwconfig

szela · 2009-06-06 19:58:14

Proszę:

lo no wireless extensions.

eth0 no wireless extensions.

ilin · 2009-06-06 19:59:47

Nie ma karty.

Pokaz

Kod:

lspci

jesli to karta na pci.

szela · 2009-06-06 20:05:20

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
09:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)

ilin · 2009-06-06 20:12:39

Kod:

Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

Ty masz taką kartę.

Zainstaluj pakiet

Kod:

b43-fwcutter

Zrestartuj kompa i zobacz czy się pokawi.
(nie wiem czy w jądrze jest sterownik do niej)

szela · 2009-06-06 20:15:17

po potwierdzeniu komendy aptitude install b43-fwcutter nie znalazlo mi sterownikow na to wychodzi ze nie mam ich w jadrze

szela · 2009-06-06 20:16:54

albo wiesz co one sa juz chyba zainstalowane

ilin · 2009-06-06 20:19:19

Ten pakiet się zainstalowal czy nie?

Jaką masz wersję jądra?

Pokaż

Kod:

lsmod

szela · 2009-06-06 20:24:27

wersja jadra to 2.6. cos tam dalej

komenda lsmod:

Module Size Used by
nvidia 8119368 39
ipv6 292576 16
acpi_cpufreq 8240 0
cpufreq_powersave 1592 0
loop 16996 0
snd_hda_codec_realtek 255196 1
snd_hda_intel 27336 3
snd_hda_codec 59288 2 snd_hda_codec_realtek,snd_hda_intel
sr_mod 15172 0
snd_pcm_oss 40576 0
snd_mixer_oss 16312 1 snd_pcm_oss
cdrom 37576 1 sr_mod
snd_pcm 74112 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_oss 33376 0
snd_seq_midi_event 7160 1 snd_seq_oss
snd_seq 56000 4 snd_seq_oss,snd_seq_midi_event
snd_timer 22376 3 snd_pcm,snd_seq
snd_seq_device 7020 2 snd_seq_oss,snd_seq
sdhci_pci 8280 0
sdhci 17660 1 sdhci_pci
snd 64872 14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
i2c_i801 9972 0
uhci_hcd 25008 0
ehci_hcd 39684 0
ricoh_mmc 4120 0
mmc_core 49056 1 sdhci
soundcore 7040 1 snd
snd_page_alloc 9352 2 snd_hda_intel,snd_pcm
i2c_core 23520 2 nvidia,i2c_i801
ata_piix 26236 0
usbcore 159664 3 uhci_hcd,ehci_hcd
r8169 37564 0
mii 5240 1 r8169
wmi 7168 0
psmouse 45684 0
battery 12576 0
thermal 18968 0
ac 4928 0
button 7256 0
processor 44144 4 acpi_cpufreq,thermal
evdev 11424 9

ilin · 2009-06-06 20:28:32

Te 2.6 cos tam jest bardzo wazne.

Kod:

uname -a

pokaż.

Nie ma sterów w jądrze.

szela · 2009-06-06 20:32:24

Przepraszam i proszę: Linux Szela 2.6.29.4 #1 SMP Wed Jun 3 17:11:17 CEST 2009 x86_64 GNU/Linux

ilin · 2009-06-06 20:34:19

Zobacz czy wejdzie na czysto

Kod:

modprobe b43

Pozostaje alternatywna metoda za pomocą ndiswrapera.

szela · 2009-06-06 20:34:44

poszło:) co teraz mam zdorbic?:)

Ostatnio edytowany przez szela (2009-06-06 20:46:17)

ilin · 2009-06-06 20:46:20

Pokazala się karta w iwconfig?

szela · 2009-06-06 20:49:12

niestety nie.:(

ilin · 2009-06-06 20:58:55

Pokaz jeszcze

Kod:

lspci -n

Sprawdzimy jaki to model po ID karty i zapytamy wujka google co wie na jej temat.

Rozumiem że pod windowsem ta karta działa i masz do niej sterowniki windowsowe.
W najgorszym razie użyjemy sterowników windowsowych przez ndiswrappera.

Acha pokaż jeszcze

Kod:

dpkg -l | grep b43

Forum Debian Users Gang

Ogłoszenie

#1 2009-04-24 11:15:02

Contravene - Użytkownik

Intel wifi

Kod:

Kod:

#2 2009-04-24 11:18:12

Lacer - Członek DUG

Re: Intel wifi

#3 2009-04-24 11:33:39

0dd - Członek DUG

Re: Intel wifi

Kod:

#4 2009-04-24 14:21:59

Contravene - Użytkownik

Re: Intel wifi

Lacer napisał(-a):

Kod:

Kod:

Kod:

#5 2009-04-24 22:35:16

Lacer - Członek DUG

Re: Intel wifi

#6 2009-04-25 10:24:26

k4misiek - Green Reaper

Re: Intel wifi

#7 2009-04-27 09:16:24

Contravene - Użytkownik

Re: Intel wifi

Lacer napisał(-a):

sp3cu napisał(-a):

#8 2009-05-01 12:45:29

k4misiek - Green Reaper

Re: Intel wifi

Contravene napisał(-a):

sp3cu napisał(-a):

#9 2009-06-06 18:58:23

szela - Użytkownik

Re: Intel wifi

#10 2009-06-06 18:59:42

ilin - Palacz

Re: Intel wifi

Kod:

#11 2009-06-06 19:58:14

szela - Użytkownik

Re: Intel wifi

#12 2009-06-06 19:59:47

ilin - Palacz

Re: Intel wifi

Kod:

#13 2009-06-06 20:05:20

szela - Użytkownik

Re: Intel wifi

#14 2009-06-06 20:12:39

ilin - Palacz

Re: Intel wifi

Kod:

Kod:

#15 2009-06-06 20:15:17

szela - Użytkownik

Re: Intel wifi

#16 2009-06-06 20:16:54

szela - Użytkownik

Re: Intel wifi

#17 2009-06-06 20:19:19

ilin - Palacz

Re: Intel wifi

Kod:

#18 2009-06-06 20:24:27

szela - Użytkownik

Re: Intel wifi

#19 2009-06-06 20:28:32

ilin - Palacz

Re: Intel wifi

Kod:

#20 2009-06-06 20:32:24

szela - Użytkownik

Re: Intel wifi

#21 2009-06-06 20:34:19