Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2008-08-17 16:26:08
Trin - 
Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Problem z shutdown
Tak więc żadne shutdown -h now .. -r now ani też /sbin/halt nie dają nic prócz tego że ma zawieche na komunikacie "acpid: exiting"
/var/log/syslog:
Kod:
Jul 23 17:21:33 debian syslogd 1.5.0#5: restart. Jul 23 17:39:01 debian /USR/SBIN/CRON[4020]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) Jul 23 17:47:21 debian NetworkManager: <debug> [1216828041.370357] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_label_GMB_DRIVER'). Jul 23 17:47:35 debian shutdown[4086]: shutting down for system reboot Jul 23 17:47:35 debian init: Switching to runlevel: 6 Jul 23 17:47:35 debian kernel: gdm[2777]: segfault at 00000021 eip b77bd3c5 esp bfebf520 error 6 Jul 23 17:47:37 debian NetworkManager: <WARN> nm_signal_handler(): Caught signal 15, shutting down normally. Jul 23 17:47:37 debian NetworkManager: <info> Caught terminiation signal Jul 23 17:47:37 debian NetworkManager: <debug> [1216828057.793494] nm_print_open_socks(): Open Sockets List: Jul 23 17:47:37 debian NetworkManager: <debug> [1216828057.793554] nm_print_open_socks(): Open Sockets List Done. Jul 23 17:47:38 debian rpc.statd[1711]: Caught signal 15, un-registering and exiting. Jul 23 17:47:39 debian mysqld[2177]: 080723 17:47:39 [Note] /usr/sbin/mysqld: Normal shutdown Jul 23 17:47:39 debian mysqld[2177]: Jul 23 17:47:39 debian mysqld[2177]: 080723 17:47:39 InnoDB: Starting shutdown... Jul 23 17:47:40 debian mysqld[2177]: 080723 17:47:40 InnoDB: Shutdown completed; log sequence number 0 43655 Jul 23 17:47:40 debian mysqld[2177]: 080723 17:47:40 [Note] /usr/sbin/mysqld: Shutdown complete Jul 23 17:47:40 debian mysqld[2177]: Jul 23 17:47:40 debian mysqld_safe[4300]: ended Jul 23 17:47:42 debian kernel: fuse exit Jul 23 17:47:43 debian acpid: exiting Jul 23 17:47:43 debian kernel: Kernel logging (proc) stopped. Jul 23 17:47:43 debian kernel: Kernel log daemon terminating. Jul 23 17:47:44 debian exiting on signal 15
Co jest nie tak?
Ostatnio edytowany przez Trin (2008-08-17 16:32:06)
Offline
#2 2008-08-17 16:39:02
azhag - Admin łajza
- azhag
- Admin łajza
- Skąd: Warszawa
- Zarejestrowany: 2005-11-15
Re: Problem z shutdown
A jakby tak acpid brutalnie zamordować (killall -9 acpid) przed wyłączeniem?
PS. Tak w ogóle, to po co ci mysqld? :)
Błogosławieni, którzy czynią FAQ.
opencaching :: debian sources.list :: coś jakby blog :: polski portal debiana :: linux user #403712
Offline
#3 2008-08-17 16:45:47
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
tak w ogole,wczoraj mialam to wylaczyc ale sie wahalam czy nie polozy systemu.zaraz to zrobie.
killall -9 acpi - i co to nam da?
Ostatnio edytowany przez Trin (2008-08-17 16:46:11)
Offline
#4 2008-08-17 16:47:19
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Ten problem nie pojawił się po jakims upgradzie jajka przypadkiem czy tak sam z siebie powstał?
Offline
#5 2008-08-17 16:50:44
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
własnie po upgradzie.
Jakos tak zaczelo swirowac jak zrobilam update&upgrade kiedyś tam.
Ostatnio edytowany przez Trin (2008-08-17 16:51:24)
Offline
#6 2008-08-17 16:54:24
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Sprobuj (jeśli to możliwe)zainstalować równolegle inną wersję jajka z repo i wystartuj z niego.
Zobacz czy problem będzie nadal występował.
Offline
#7 2008-08-17 16:56:55
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
dzieki ilin(starszy głupi kuzynie:D ),w razie problemow/klopotów/pytan bede pisać.
Offline
#8 2008-08-17 18:49:13
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Trin ja Ci nie każę kompilowac jądra.
Zobacz czy masz w repo inną wersję
Jeśli tak to zainstaluj ją.
Dopisze się do gruba i po restarcie z niego wystartuj.
Zobaczymy czy problem będzie też występował.
Chodzi o zdiagnozowanie sprawcy bo podejrzewam ze to wina obecnego jajka.
Obecne jajko będziesz dalej miala nic się nie stanie.
Samo linux_image 2.6.xx wystarczy.
Offline
#9 2008-08-17 19:24:56
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
jeszcze rozrózniam instaluj od kompiluj!:)
zajme sie tym,o efektach napisze.
Offline
#10 2008-08-17 19:33:29
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Kod:
jeszcze rozrózniam instaluj od kompiluj!:)
W chatboxie pobąkiwalas o kompilacji więc wolalem uzupełnić.
Ale tak to ok.
Offline
#11 2008-08-17 19:34:52
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
pobąkiwałam bo rozważałam tę możliwość nauczenia się czegoś nowego.
poza tym chwile przed tym wyczytałam w google że mandriva to linux dla blondynki.
Pozostaje zmienić distro i kolor włosów:(
Offline
#12 2008-08-18 12:17:34
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
ilin,tak wiec przerzucilam sie na kernel 2.6.25-2-486,restart(a wlasciwie z powera,na chama bo znow mial zawieche po kliknieciu na'wyłącz"),w kazdym razie do gruba elegancko dopisalo,wystartowal z nowego kernela i..nadal to samo:/
Offline
#13 2008-08-18 12:32:10
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Jakie jajko wcześniej miałaś?
Offline
#14 2008-08-18 12:33:31
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
2.6.24-1-486
o ile mnie pamięć nie myli.
Ostatnio edytowany przez Trin (2008-08-18 12:34:21)
Offline
#15 2008-08-18 12:35:31
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Sprobuj dac jajo *686 bo chyba tak starenkiego kompa nie masz.
Offline
#16 2008-08-18 12:38:14
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
łokej,zobaczymy czy to podziała.
/z jajkami obchodze sie ostrożnie,o jaki komp by nie chodzilo.
edit:
@#@$#$#$%!!
po starcie z *686 tez to samo.
mam 3 konfiguracje kernela dopisane do gruba i na każdej to samo.
Ostatnio edytowany przez Trin (2008-08-18 12:49:15)
Offline
#17 2008-08-18 12:50:51
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
To sie zapowiada grubszy problem.
Pokaz /var/log/dmesg i wynik polecenia
Kod:
lsmod
Offline
#18 2008-08-18 13:12:09
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
lsmod:
Kod:
Module Size Used by rfcomm 36368 2 l2cap 22784 9 rfcomm bluetooth 52900 4 rfcomm,l2cap ipv6 241956 14 ppdev 8676 0 lp 11012 2 video 19728 0 output 3712 1 video ac 4448 0 battery 8448 0 cpufreq_stats 5216 0 cpufreq_userspace 3812 0 cpufreq_conservative 7432 0 cpufreq_powersave 1856 0 cpufreq_ondemand 8428 0 freq_table 4512 2 cpufreq_stats,cpufreq_ondemand fuse 44348 1 dm_snapshot 17444 0 dm_mirror 25316 0 dm_mod 55656 2 dm_snapshot,dm_mirror loop 16708 0 snd_via82xx 26424 1 gameport 14124 1 snd_via82xx snd_ac97_codec 91300 1 snd_via82xx ac97_bus 1952 1 snd_ac97_codec snd_mpu401_uart 7968 1 snd_via82xx snd_pcm_oss 37824 0 snd_pcm 68228 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_page_alloc 9992 2 snd_via82xx,snd_pcm snd_mixer_oss 14880 1 snd_pcm_oss snd_seq_dummy 3780 0 serio_raw 6532 0 psmouse 35920 0 tuner 32832 0 tea5767 6180 1 tuner tda8290 12356 1 tuner tda18271 29224 1 tda8290 snd_seq_oss 28544 0 snd_seq_midi 8064 0 snd_rawmidi 22528 2 snd_mpu401_uart,snd_seq_midi tda827x 9732 1 tda8290 tuner_xc2028 17296 1 tuner xc5000 9700 1 tuner firmware_class 9088 2 tuner_xc2028,xc5000 tda9887 8900 1 tuner tuner_simple 7784 1 tuner mt20xx 11080 1 tuner tea5761 4868 1 tuner rtc 14272 0 pcspkr 3136 0 snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event saa7134 129300 0 videodev 30112 2 tuner,saa7134 snd_timer 21320 2 snd_pcm,snd_seq snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq v4l1_compat 12484 1 videodev compat_ioctl32 1408 1 saa7134 v4l2_common 10720 2 tuner,saa7134 videobuf_dma_sg 13028 1 saa7134 snd 48772 13 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videobuf_core 17316 2 saa7134,videobuf_dma_sg ir_kbd_i2c 9296 1 saa7134 ir_common 37028 2 saa7134,ir_kbd_i2c tveeprom 14480 1 saa7134 soundcore 7488 1 snd button 8240 0 via686a 14316 0 i2c_viapro 8308 0 i2c_core 22548 16 tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,saa7134,v4l2_common,ir_kbd_i2c,tveeprom,i2c_viapro shpchp 29716 0 pci_hotplug 26980 1 shpchp parport_pc 25860 1 parport 33868 3 ppdev,lp,parport_pc via_agp 9888 1 agpgart 31720 1 via_agp joydev 11328 0 evdev 11328 5 wmi 7880 0 led_class 5284 0 ext3 120360 2 jbd 43444 1 ext3 mbcache 8260 1 ext3 usbhid 40192 0 hid 36032 1 usbhid ff_memless 5384 1 usbhid ide_disk 13952 4 ide_cd_mod 32864 0 cdrom 31872 1 ide_cd_mod ata_generic 8004 0 libata 142288 1 ata_generic scsi_mod 138668 1 libata dock 10448 1 libata ide_pci_generic 4228 0 [permanent] 8139cp 21280 0 floppy 53284 0 8139too 25184 0 mii 5248 2 8139cp,8139too uhci_hcd 22352 0 usbcore 130032 3 usbhid,uhci_hcd via82cxxx 7940 0 [permanent] ide_core 100312 4 ide_disk,ide_cd_mod,ide_pci_generic,via82cxxx thermal 19100 0 processor 39660 2 thermal fan 5636 0
/var/log/dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.25-2-686 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125969 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F7DE0, 0014 (r0 VIA694) [ 0.000000] ACPI: RSDT 1FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 1FFF30C0, 2375 (r1 VIA694 AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 1FFF0000, 0040 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033 [ 0.000000] Kernel command line: root=/dev/hdd1 ro [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0140c000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1202.157 MHz processor. [ 0.001164] Console: colour VGA+ 80x25 [ 0.001171] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 509512k/524224k available (1753k kernel code, 14112k reserved, 728k data, 252k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.004000] .init : 0xc0375000 - 0xc03b4000 ( 252 kB) [ 0.004000] .data : 0xc02b649a - 0xc036c640 ( 728 kB) [ 0.004000] .text : 0xc0100000 - 0xc02b649a (1753 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084009] Calibrating delay using timer specific routine.. 2407.16 BogoMIPS (lpj=4814332) [ 0.084185] Security Framework initialized [ 0.084245] SELinux: Disabled at boot. [ 0.084300] Capability LSM initialized [ 0.084378] Mount-cache hash table entries: 512 [ 0.084720] Initializing cgroup subsys ns [ 0.084780] Initializing cgroup subsys cpuacct [ 0.084862] Enabling disabled K7/SSE Support. [ 0.084919] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084979] CPU: L2 Cache: 64K (64 bytes/line) [ 0.085036] Intel machine check architecture supported. [ 0.085092] Intel machine check reporting enabled on CPU#0. [ 0.085158] Compat vDSO mapped to ffffe000. [ 0.085222] Checking 'hlt' instruction... OK. [ 0.100363] SMP alternatives: switching to UP code [ 0.103306] Freeing SMP alternatives: 16k freed [ 0.103369] ACPI: Core revision 20070126 [ 0.109514] ACPI: setting ELCR to 0200 (from 0e28) [ 0.111216] CPU0: AMD Athlon(tm) Processor stepping 01 [ 0.111346] SMP motherboard not detected. [ 0.111399] Local APIC not detected. Using dummy APIC emulation. [ 0.111570] Brought up 1 CPUs [ 0.111667] CPU0 attaching sched-domain: [ 0.111674] domain 0: span 01 [ 0.111678] groups: 01 [ 0.112223] net_namespace: 548 bytes [ 0.112294] Booting paravirtualized kernel on bare hardware [ 0.112908] NET: Registered protocol family 16 [ 0.113406] ACPI: bus type pci registered [ 0.146543] PCI: PCI BIOS revision 2.10 entry at 0xfb350, last bus=1 [ 0.146603] PCI: Using configuration type 1 [ 0.146663] Setting up standard PCI resources [ 0.159816] ACPI: EC: Look up EC in DSDT [ 0.163513] ACPI: Interpreter enabled [ 0.163580] ACPI: (supports S0 S3 S5) [ 0.163752] ACPI: Using PIC for interrupt routing [ 0.170762] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.171261] pci 0000:00:07.4: quirk: region 4000-40ff claimed by vt82c586 ACPI [ 0.171331] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon [ 0.171398] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB [ 0.171726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.194278] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.195069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.195842] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.196646] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) [ 0.197497] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.197636] pnp: PnP ACPI init [ 0.197706] ACPI: bus type pnp registered [ 0.203192] pnp: PnP ACPI: found 10 devices [ 0.203259] ACPI: ACPI bus type pnp unregistered [ 0.203317] PnPBIOS: Disabled by ACPI PNP [ 0.203944] PCI: Using ACPI for IRQ routing [ 0.204033] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.227456] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.228027] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.228088] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.228148] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.228208] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.228276] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.228343] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.228401] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.228468] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.228539] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.259544] PCI: Bridge: 0000:00:01.0 [ 0.259605] IO window: disabled. [ 0.259658] MEM window: 0xd6000000-0xd7ffffff [ 0.259713] PREFETCH window: 0x00000000d4000000-0x00000000d5ffffff [ 0.259791] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.259848] NET: Registered protocol family 2 [ 0.260127] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.260625] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.261102] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.261604] TCP: Hash tables configured (established 16384 bind 16384) [ 0.261668] TCP reno registered [ 0.262215] checking if image is initramfs... it is [ 0.760095] Switched to high resolution mode on CPU 0 [ 1.173385] Freeing initrd memory: 6441k freed [ 1.174857] audit: initializing netlink socket (disabled) [ 1.174954] type=2000 audit(1219057320.172:1): initialized [ 1.175267] Total HugeTLB memory allocated, 0 [ 1.175461] VFS: Disk quotas dquot_6.5.1 [ 1.175570] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.175823] io scheduler noop registered [ 1.175877] io scheduler anticipatory registered [ 1.175930] io scheduler deadline registered [ 1.175993] io scheduler cfq registered (default) [ 1.176116] PCI: VIA PCI bridge detected. Disabling DAC. [ 1.176175] pci 0000:00:07.0: Disabling VIA external APIC routing [ 1.176282] pci 0000:01:00.0: Boot video device [ 1.177119] isapnp: Scanning for PnP cards... [ 1.531802] isapnp: No Plug & Play device found [ 1.537749] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.538048] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.538902] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.540823] brd: module loaded [ 1.541167] PNP: No PS/2 controller found. Probing ports directly. [ 1.541656] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.541720] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.542100] mice: PS/2 mouse device common for all mice [ 1.542285] cpuidle: using governor ladder [ 1.542340] cpuidle: using governor menu [ 1.543214] TCP cubic registered [ 1.543277] NET: Registered protocol family 1 [ 1.543347] NET: Registered protocol family 17 [ 1.543411] Using IPI No-Shortcut mode [ 1.543836] registered taskstats version 1 [ 1.544843] Freeing unused kernel memory: 252k freed [ 1.748263] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.748539] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.748601] ACPI: Processor [CPU0] (supports 2 throttling states) [ 2.592401] Uniform Multi-Platform E-IDE driver [ 2.592471] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.611228] VP_IDE: IDE controller (0x1106:0x0571 rev 0x10) at PCI slot 0000:00:07.1 [ 2.611334] VP_IDE: not 100% native mode: will probe irqs later [ 2.611403] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 [ 2.612194] ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:PIO, hdb:DMA [ 2.612309] ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:PIO, hdd:DMA [ 2.612417] Probing IDE interface ide0... [ 2.888411] usbcore: registered new interface driver usbfs [ 2.888530] usbcore: registered new interface driver hub [ 2.898330] usbcore: registered new device driver usb [ 2.918650] USB Universal Host Controller Interface driver v3.0 [ 2.954804] 8139too Fast Ethernet driver 0.9.28 [ 3.118331] Floppy drive(s): fd0 is 1.44M [ 3.136228] FDC 0 is a post-1991 82077 [ 3.208200] Marking TSC unstable due to: TSC halts in idle. [ 3.740387] hdb: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive [ 3.796170] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.796451] hdb: UDMA/33 mode selected [ 3.796873] Probing IDE interface ide1... [ 4.430411] hdd: WDC WD800BB-00FJA0, ATA DISK drive [ 4.486154] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 4.486256] hdd: UDMA/66 mode selected [ 4.486434] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.486567] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.487644] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 4.487711] PCI: setting IRQ 11 as level-triggered [ 4.487718] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 4.488618] eth0: RealTek RTL8139 at 0xe800, 00:e0:4c:61:ef:51, IRQ 11 [ 4.488679] eth0: Identified 8139 chip type 'RTL-8139B' [ 4.492576] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 [ 4.492648] PCI: setting IRQ 3 as level-triggered [ 4.492655] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 [ 4.492810] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 4.493201] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 4.493315] uhci_hcd 0000:00:07.2: irq 3, io base 0x0000d400 [ 4.493662] usb usb1: configuration #1 chosen from 1 choice [ 4.493760] hub 1-0:1.0: USB hub found [ 4.493832] hub 1-0:1.0: 2 ports detected [ 4.494180] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.594116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.594187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.594253] usb usb1: Product: UHCI Host Controller [ 4.594306] usb usb1: Manufacturer: Linux 2.6.25-2-686 uhci_hcd [ 4.594362] usb usb1: SerialNumber: 0000:00:07.2 [ 4.594501] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 [ 4.594655] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 4.594757] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 4.594854] uhci_hcd 0000:00:07.3: irq 3, io base 0x0000d800 [ 4.595148] usb usb2: configuration #1 chosen from 1 choice [ 4.595249] hub 2-0:1.0: USB hub found [ 4.595319] hub 2-0:1.0: 2 ports detected [ 4.697714] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.697785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.697852] usb usb2: Product: UHCI Host Controller [ 4.697906] usb usb2: Manufacturer: Linux 2.6.25-2-686 uhci_hcd [ 4.697962] usb usb2: SerialNumber: 0000:00:07.3 [ 4.703376] No dock devices found. [ 4.720176] SCSI subsystem initialized [ 4.749871] udev: renamed network interface eth0 to eth1 [ 4.750807] libata version 3.00 loaded. [ 4.834436] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 4.865893] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 4.866174] Uniform CD-ROM driver Revision: 3.20 [ 4.873967] hdd: max request size: 128KiB [ 4.877341] hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 [ 4.881834] hdd: cache flushes supported [ 4.882020] hdd: hdd1 hdd2 hdd3 hdd4 < hdd5 hdd6 hdd7 > [ 5.037081] usb 1-1: configuration #1 chosen from 1 choice [ 5.044046] usb 1-1: New USB device found, idVendor=04d9, idProduct=0499 [ 5.044118] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.526570] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 5.698549] usb 2-2: configuration #1 chosen from 1 choice [ 5.728750] usb 2-2: New USB device found, idVendor=0e6a, idProduct=6001 [ 5.728821] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.728881] usb 2-2: Product: HID Keyboard Device [ 5.729006] usbcore: registered new interface driver hiddev [ 5.768265] input: HID 04d9:0499 as /class/input/input0 [ 5.778749] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:07.2-1 [ 5.791463] input: HID Keyboard Device as /class/input/input1 [ 5.791463] input,hidraw1: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:07.3-2 [ 5.809450] input: HID Keyboard Device as /class/input/input2 [ 5.809550] input,hidraw2: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:07.3-2 [ 5.809803] usbcore: registered new interface driver usbhid [ 5.809863] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 6.058085] PM: Starting manual resume from disk [ 6.123218] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.123290] EXT3-fs: write access will be enabled during recovery. [ 15.011141] kjournald starting. Commit interval 5 seconds [ 15.011141] EXT3-fs: hdd1: orphan cleanup on readonly fs [ 15.011141] ext3_orphan_cleanup: deleting unreferenced inode 293280 [ 15.011141] ext3_orphan_cleanup: deleting unreferenced inode 667982 [ 15.011141] ext3_orphan_cleanup: deleting unreferenced inode 667963 [ 15.011141] EXT3-fs: hdd1: 3 orphan inodes deleted [ 15.011141] EXT3-fs: recovery complete. [ 15.030455] EXT3-fs: mounted filesystem with ordered data mode. [ 17.874316] ACPI: WMI: Mapper loaded [ 17.891999] acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1 [ 17.892080] acer-wmi: No or unsupported WMI interface, unable to load [ 19.145199] Linux agpgart interface v0.103 [ 19.184021] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset [ 19.190147] agpgart: AGP aperture is 64M @ 0xd0000000 [ 19.277960] parport_pc: VIA 686A/8231 detected [ 19.277967] parport_pc: probing current configuration [ 19.277988] parport_pc: Current parallel port base: 0x378 [ 19.278037] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 19.328129] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.374684] parport_pc: VIA parallel port: io=0x378, irq=7 [ 19.382631] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.014771] input: Power Button (FF) as /class/input/input3 [ 20.040828] ACPI: Power Button (FF) [PWRF] [ 20.041028] input: Power Button (CM) as /class/input/input4 [ 20.066709] ACPI: Power Button (CM) [PWRB] [ 20.754515] Linux video capture interface: v2.00 [ 20.808545] saa7130/34: v4l2 driver version 0.2.14 loaded [ 20.809319] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 20.809381] PCI: setting IRQ 5 as level-triggered [ 20.809388] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 20.809532] saa7134[0]: found at 0000:00:0a.0, rev: 1, irq: 5, latency: 32, mmio: 0xd8001000 [ 20.809608] saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected] [ 20.809697] saa7134[0]: board init: gpio is 38500 [ 20.809752] saa7134[0]: there are different flyvideo cards with different tuners [ 20.809755] saa7134[0]: out there, you might have to use the tuner=<nr> insmod [ 20.809757] saa7134[0]: option to override the default value. [ 20.810104] input: saa7134 IR (LifeView FlyVIDEO30 as /class/input/input5 [ 21.039693] input: PC Speaker as /class/input/input6 [ 21.091417] Real Time Clock Driver v1.12ac [ 21.142288] saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff [ 21.142973] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.143622] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.144270] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.144917] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.145563] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.146225] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.146898] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.147545] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.148193] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.148840] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.149489] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.150135] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.150793] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.151441] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.152091] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 21.790712] tuner' 1-0061: chip found @ 0xc2 (saa7134[0]) [ 21.790856] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 21.854864] saa7134[0]: registered device video0 [v4l2] [ 21.854964] saa7134[0]: registered device vbi0 [ 21.855862] saa7134[0]: registered device radio0 [ 23.054149] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 23.054448] PCI: Setting latency timer of device 0000:00:07.5 to 64 [ 25.169503] Adding 14651272k swap on /dev/hdd3. Priority:-1 extents:1 across:14651272k [ 25.543992] EXT3 FS on hdd1, internal journal [ 26.268064] loop: module loaded [ 26.411169] device-mapper: uevent: version 1.0.3 [ 26.414950] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 26.919357] fuse init (API version 7.9) [ 27.067306] kjournald starting. Commit interval 5 seconds [ 27.068409] EXT3 FS on hdd2, internal journal [ 27.068409] EXT3-fs: mounted filesystem with ordered data mode.
voila.
Offline
#19 2008-08-18 13:35:18
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Moze to błedny trop ale mnie to zastanawia
Kod:
Local APIC disabled by BIOS -- you can enable it with "lapic"
Nie grzebal ktos w biosie?
Offline
#20 2008-08-18 13:41:14
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
biosa raczej się nie tykam jeśli nie muszę i innym tykać się też nie pozwalam.
ostatnimi czasy w biosie nic nie było grzebane,bo system śmigał,wszystko grało i gwizdało tak jak zawsze więc..
odpada.
Tobie też już ręce i nogi opadają?;-)
Offline
#21 2008-08-18 14:15:08
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
To przypadek gdzie trzeba szukać dziury w calym.
U Ciebie jest tak
Kod:
freq_table 4512 2 cpufreq_stats,cpufreq_ondemand
A u mnie
Kod:
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
Spróbuj dać
Kod:
modprobe acpi_cpufreq
Po tym zobacz czy się wyłączy.
Offline
#22 2008-08-18 15:29:46
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
Kod:
debian:/home/anna# modprobe acpi_cpufreq FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.25-2-686/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko): No such device
na pewno mam przystąpić do wyłączania?
Offline
#23 2008-08-18 15:51:48
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Problem z shutdown
Nie byc moze ten moduł nie obsługuje Twego procka.
Jesli masz jakieś Livecd to odpal je sprawdz czy w nim działa wyłaczanie.
Jeśli dziala to zdejmij z niego lsmod porownamy jakie moduły siedzą w jądrze.
Offline
#24 2008-08-18 17:54:10
terefere - Członek DUG
Re: Problem z shutdown
Nie wiem czy identyczny ale jednak miałem podobny problem jakiś czas temu na lennym po którymś updejcie jajka. U mnie pomogło przestawienie w biosie w sekcji odpowiedzialnej za zasilanie "ACPI Standby State" na wartość S3 wcześniej było S1. Tyle że nie wiem czy dobrze podchodzę do tematu, bo u mnie jednak system się wyłączał tyle że trzeba było piecyk z palca cisnąć.
PS. Aktualne używany kernel u mnie to dystrybucyjny 2.6.24-1... wszystko gra i buczy.
Ostatnio edytowany przez terefere (2008-08-18 17:55:47)
Nigdy się niektórych rzeczy nie dowiesz, jeśli na niektóre pytania samemu sobie nie odpowiesz - STFW
Offline
#25 2008-08-18 19:03:48
Trin - Wredotka
- Trin
- Wredotka
- Zarejestrowany: 2008-05-16
Re: Problem z shutdown
wiec plyty zadnej z live nie mam,bynajmniej nie moge sie jej doszukać.stoje w miejscu;/
terefere,w nocy az z ciekawosci zajrze w biosa chyba i lukne jaką mam wartość ustawiona tam.
Ostatnio edytowany przez Trin (2008-08-18 19:04:42)
Offline