Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2008-03-23 18:03:25

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

k3b wywala się przy nagrywaniu

Witam

Problem z k3bem. Od kiedy mam debianka, wciaż nie mogę nagrać poprawnie płyt. Wcześniej na gentoo bez problemu nagrywałem, jednak tu sie kaszani ciągle ;/ Wywalając się daje błędy:

Kod:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.8
QT Version:  3.3.7
Kernel:      2.6.24-debian-n100
Devices
-----------------------
HL-DT-ST DVDRAM GMA-4082N HA01 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GMA-4082N'
Revision       : 'HA01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13696 kB/s 77x CD 9x DVD
FIFO size      : 12582912 = 12288 KB
Track 01: audio   29 MB (02:53.82) no preemp swab     
Track 02: audio   21 MB (02:08.53) no preemp swab     
Track 03: audio   31 MB (03:05.42) no preemp swab     
Track 04: audio   21 MB (02:08.50) no preemp swab     
Track 05: audio   22 MB (02:16.32) no preemp swab     
Track 06: audio   17 MB (01:41.33) no preemp swab     
Track 07: audio   50 MB (04:58.77) no preemp swab     
Track 08: audio   17 MB (01:43.04) no preemp swab     
Track 09: audio   17 MB (01:46.24) no preemp swab     
Track 10: audio   30 MB (03:03.60) no preemp swab     
Track 11: audio   24 MB (02:27.38) no preemp swab     
Track 12: audio   18 MB (01:51.41) no preemp swab     
Track 13: audio   25 MB (02:31.36) no preemp swab     
Track 14: audio   33 MB (03:19.40) no preemp swab     
Track 15: audio   18 MB (01:50.10) no preemp swab     
Track 16: audio   34 MB (03:22.24) no preemp swab     
Track 17: audio  126 MB (12:31.26) no preemp swab     
Total size:      541 MB (53:38.77) = 241408 sectors
Speed set to 1764 KB/s
Lout start:      541 MB (53:40/58) = 241408 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 118441
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of   29 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.004s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   44.630s
Average write speed  72.2x.
Fixating...
Fixating time:    0.004s

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=1,0,0 speed=8 -dao driveropts=burnfree -eject -useinfo -audio -shorttrack /tmp/kde-grzeslaw/k3b_audio_0_01.inf /tmp/kde-grzeslaw/k3b_audio_0_02.inf /tmp/kde-grzeslaw/k3b_audio_0_03.inf /tmp/kde-grzeslaw/k3b_audio_0_04.inf /tmp/kde-grzeslaw/k3b_audio_0_05.inf /tmp/kde-grzeslaw/k3b_audio_0_06.inf /tmp/kde-grzeslaw/k3b_audio_0_07.inf /tmp/kde-grzeslaw/k3b_audio_0_08.inf /tmp/kde-grzeslaw/k3b_audio_0_09.inf /tmp/kde-grzeslaw/k3b_audio_0_10.inf /tmp/kde-grzeslaw/k3b_audio_0_11.inf /tmp/kde-grzeslaw/k3b_audio_0_12.inf /tmp/kde-grzeslaw/k3b_audio_0_13.inf /tmp/kde-grzeslaw/k3b_audio_0_14.inf /tmp/kde-grzeslaw/k3b_audio_0_15.inf /tmp/kde-grzeslaw/k3b_audio_0_16.inf /tmp/kde-grzeslaw/k3b_audio_0_17.inf

Teraz tak:
- na windowsie nagrywa ok - czyli to nie wina napędu
- na jajku dystrybucyjnym dzieje się to samo, także nie wina jajka
- dma wkompilowane
- próbowałem innych płytek
- user jest w grupie mogacej nagrywać
- nie mam k3bsetup -nie wiem czemu?
- płytka wygląda na zapisaną w 10% po nieudanym nagraniu
- próbowałem nagrywac w trybie TAO też to samo

Co poradzicie?

Offline

 

#2  2008-03-23 19:26:17

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: k3b wywala się przy nagrywaniu

Spróbuj nagrac "z palca" to wyjdzie co jest winne wodim,growisofs czy sam k3b.

Problemy rozwiązujemy na forum nie na PW -> Niech inni na tym skorzystają.
Polski portal Debiana

Offline

 

#3  2008-03-24 22:58:16

  Grzeslaw - Użytkownik

Grzeslaw
Użytkownik
Zarejestrowany: 2008-02-12

Re: k3b wywala się przy nagrywaniu

Próbowałem nagrać isówkę cdrecordem, ale też się wywalił:

Kod:

[14:52:58] lenovo /home/movies $   cdrecord -v dev=ATAPI:1,0,0 /home/iso/Knoppix_50/KNOPPIX_V5.0.1CD-2006-06-01-EN.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM

Warning, the ATAPI: method is considered deprecated on modern kernels!
Mapping device specification to dev=1,0,0 now.
To force the old ATAPI: method, replace ATAPI: with OLDATAPI:
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GMA-4082N'
Revision       : 'HA01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 13552 kB/s 77x CD 9x DVD
FIFO size      : 12582912 = 12288 KB
Track 01: data   696 MB
Total size:      799 MB (79:12.86) = 356465 sectors
Lout start:      799 MB (79:14/65) = 356465 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 3384
Speed set to 4234 KB/s
Starting to write CD/DVD at speed  24.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  696 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 9B 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 40s

write track data: error after 317440 bytes
wodim: The current problem looks like a buffer underrun.
wodim: It looks like 'driveropts=burnfree' does not work for this drive.
wodim: Please report.
wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
Writing  time:   20.332s
Average write speed 234.3x.
Fixating...
Fixating time:   27.388s

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)