Forum Debian Users Gang

cypi44 · 2012-02-09 18:16:26

Posiadam monitor Samsung Syncmaster 913V. Na obecną chwilę posiadam kartę GF800GT i zainstalowane sterowniki z repozytorium. Nie mogę ustawić rozdzielczości wyższej niż 1024x768. Próbowałem sobie pomóc tym sposobem http://dug.net.pl/tekst/125/nvidia___konfiguracja_r … zania_obrazu/ ale nie działa.
Na karcie ATI i zamkniętych sterownikach do niej również występował ten problem.

Dodam jeszcze, że identyczny problem mam na innych systemach, w tym na Windowsie.

Ostatnio edytowany przez cypi44 (2012-02-09 18:17:35)

ArnVaker · 2012-02-09 18:17:20

Jakie sterowniki z repozytorium (nvidia, nouveau)?

EDIT: Zakładając, że zamknięte… Spróbuj zdefiniować na sztywno tak jak tutaj podałem: dug.net.pl/tekst/142#xorg_conf.

cypi44 · 2012-02-09 18:42:14

Sterowniki zamknięte. Nie za bardzo rozumiem co mam zrobić według tego linku. Chodzi Ci o zmienienie pliku xorg.conf? Nic to nie pomaga.
Mam jeszcze do wyboru rozdzielczość 1360x768 jeśli ma to jakieś znaczenie.

yossarian · 2012-02-09 18:47:43

Podziel się całą zawartością pliku xorg.conf

ArnVaker · 2012-02-09 19:04:55

cypi44 napisał(-a):
Chodzi Ci o zmienienie pliku xorg.conf?

Tak. Żebyś wywalił ten co masz, a wstawił ten mój zmieniając w nim tylko rozdzielczość i odświeżanie.

cypi44 · 2012-02-09 19:17:03

Niestety w niczym to nie pomaga. Wszystko zachowuje się tak jak przy standardowym xorg.conf

Kod:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 290.10  (pbuilder@cake)  Wed Nov 23 11:33:47 UTC 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

ArnVaker · 2012-02-09 19:18:57

Pokaż loga z Xorga na tym moim xorg.conf ze zmienioną rozdzielczością.

cypi44 · 2012-02-10 13:07:02

Chodzi o zawartość pliku /var/log/Xorg.0.log ?

Kod:

[     9.771] 
X.Org X Server 1.11.3.901 (1.11.4 RC 1)
Release Date: 2012-01-06
[     9.771] X Protocol Version 11, Revision 0
[     9.771] Build Operating System: Linux 3.2.0-rc6+ x86_64 Debian
[     9.771] Current Operating System: Linux debian 3.1.0-1-amd64 #1 SMP Tue Jan 10 05:01:58 UTC 2012 x86_64
[     9.771] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=a09d07ed-21f3-4c0b-8abd-4a743e975c99 ro quiet
[     9.771] Build Date: 19 January 2012  09:53:39AM
[     9.771] xorg-server 2:1.11.3.901-2 (Cyril Brulebois <kibi@debian.org>) 
[     9.771] Current version of pixman: 0.24.2
[     9.771]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[     9.771] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.771] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 10 14:02:34 2012
[     9.790] (==) Using config file: "/etc/X11/xorg.conf"
[     9.790] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.804] (==) No Layout section.  Using the first Screen section.
[     9.804] (**) |-->Screen "Default Screen" (0)
[     9.804] (**) |   |-->Monitor "Configured Monitor"
[     9.805] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[     9.805] (**) |   |-->Device "Configured Video Device"
[     9.805] (==) Automatically adding devices
[     9.805] (==) Automatically enabling devices
[     9.841] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     9.841]     Entry deleted from font path.
[     9.868] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[     9.868]     Entry deleted from font path.
[     9.868] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[     9.868] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.868] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.868] (II) Loader magic: 0x7f74bdb8cae0
[     9.868] (II) Module ABI versions:
[     9.868]     X.Org ANSI C Emulation: 0.4
[     9.868]     X.Org Video Driver: 11.0
[     9.868]     X.Org XInput driver : 13.0
[     9.868]     X.Org Server Extension : 6.0
[     9.869] (--) PCI:*(0:1:0:0) 10de:0421:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000af00/128, BIOS @ 0x????????/131072
[     9.869] (II) Open ACPI successful (/var/run/acpid.socket)
[     9.869] (II) LoadModule: "extmod"
[     9.932] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[     9.937] (II) Module extmod: vendor="X.Org Foundation"
[     9.937]     compiled for 1.11.3.901, module version = 1.0.0
[     9.937]     Module class: X.Org Server Extension
[     9.937]     ABI class: X.Org Server Extension, version 6.0
[     9.937] (II) Loading extension SELinux
[     9.937] (II) Loading extension MIT-SCREEN-SAVER
[     9.937] (II) Loading extension XFree86-VidModeExtension
[     9.937] (II) Loading extension XFree86-DGA
[     9.937] (II) Loading extension DPMS
[     9.937] (II) Loading extension XVideo
[     9.937] (II) Loading extension XVideo-MotionCompensation
[     9.937] (II) Loading extension X-Resource
[     9.937] (II) LoadModule: "dbe"
[     9.937] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[     9.938] (II) Module dbe: vendor="X.Org Foundation"
[     9.938]     compiled for 1.11.3.901, module version = 1.0.0
[     9.938]     Module class: X.Org Server Extension
[     9.938]     ABI class: X.Org Server Extension, version 6.0
[     9.938] (II) Loading extension DOUBLE-BUFFER
[     9.938] (II) LoadModule: "glx"
[     9.938] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    10.381] (II) Module glx: vendor="NVIDIA Corporation"
[    10.391]     compiled for 4.0.2, module version = 1.0.0
[    10.391]     Module class: X.Org Server Extension
[    10.392] (II) NVIDIA GLX Module  290.10  Wed Nov 16 18:01:24 PST 2011
[    10.392] (II) Loading extension GLX
[    10.392] (II) LoadModule: "record"
[    10.392] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    10.403] (II) Module record: vendor="X.Org Foundation"
[    10.403]     compiled for 1.11.3.901, module version = 1.13.0
[    10.403]     Module class: X.Org Server Extension
[    10.403]     ABI class: X.Org Server Extension, version 6.0
[    10.403] (II) Loading extension RECORD
[    10.404] (II) LoadModule: "dri"
[    10.404] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    10.421] (II) Module dri: vendor="X.Org Foundation"
[    10.421]     compiled for 1.11.3.901, module version = 1.0.0
[    10.421]     ABI class: X.Org Server Extension, version 6.0
[    10.421] (II) Loading extension XFree86-DRI
[    10.421] (II) LoadModule: "dri2"
[    10.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    10.421] (II) Module dri2: vendor="X.Org Foundation"
[    10.421]     compiled for 1.11.3.901, module version = 1.2.0
[    10.421]     ABI class: X.Org Server Extension, version 6.0
[    10.421] (II) Loading extension DRI2
[    10.421] (II) LoadModule: "nvidia"
[    10.422] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    10.476] (II) Module nvidia: vendor="NVIDIA Corporation"
[    10.477]     compiled for 4.0.2, module version = 1.0.0
[    10.477]     Module class: X.Org Video Driver
[    10.483] (II) NVIDIA dlloader X Driver  290.10  Wed Nov 16 17:41:10 PST 2011
[    10.483] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    10.489] (++) using VT number 7

[    10.661] (II) Loading sub module "fb"
[    10.661] (II) LoadModule: "fb"
[    10.662] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.672] (II) Module fb: vendor="X.Org Foundation"
[    10.672]     compiled for 1.11.3.901, module version = 1.0.0
[    10.672]     ABI class: X.Org ANSI C Emulation, version 0.4
[    10.672] (II) Loading sub module "wfb"
[    10.672] (II) LoadModule: "wfb"
[    10.672] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    10.674] (II) Module wfb: vendor="X.Org Foundation"
[    10.674]     compiled for 1.11.3.901, module version = 1.0.0
[    10.674]     ABI class: X.Org ANSI C Emulation, version 0.4
[    10.674] (II) Loading sub module "ramdac"
[    10.674] (II) LoadModule: "ramdac"
[    10.674] (II) Module "ramdac" already built-in
[    10.681] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    10.682] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    10.682] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.683] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    10.683] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    10.683] (==) NVIDIA(0): RGB weight 888
[    10.683] (==) NVIDIA(0): Default visual is TrueColor
[    10.683] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    10.683] (**) NVIDIA(0): Option "MetaModes" "1280x1024_60"
[    10.684] (**) NVIDIA(0): Enabling 2D acceleration
[    12.154] (II) NVIDIA(GPU-0): Display (Samsung (CRT-1)) does not support NVIDIA 3D Vision
[    12.154] (II) NVIDIA(GPU-0):     stereo.
[    12.157] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
[    12.157] (--) NVIDIA(0): Memory: 524288 kBytes
[    12.157] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.46
[    12.157] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    12.157] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    12.157] (--) NVIDIA(0): Connected display device(s) on GeForce 8500 GT at PCI:1:0:0
[    12.157] (--) NVIDIA(0):     Samsung (CRT-1)
[    12.157] (--) NVIDIA(0): Samsung (CRT-1): 400.0 MHz maximum pixel clock
[    12.159] (II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-1
[    12.159] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[    12.159] (**) NVIDIA(0):     enabled on all display devices.
[    12.166] (II) NVIDIA(0): Assigned Display Device: CRT-1
[    12.166] (WW) NVIDIA(0): No valid modes for "1280x1024_60"; removing.
[    12.166] (WW) NVIDIA(0): 
[    12.166] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    12.166] (WW) NVIDIA(0):     "nvidia-auto-select".
[    12.166] (WW) NVIDIA(0): 
[    12.166] (II) NVIDIA(0): Validated modes:
[    12.166] (II) NVIDIA(0):     "nvidia-auto-select"
[    12.166] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    12.184] (--) NVIDIA(0): DPI set to (86, 84); computed from "UseEdidDpi" X config
[    12.184] (--) NVIDIA(0):     option
[    12.184] (--) Depth 24 pixmap format is 32 bpp
[    12.184] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    12.189] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    12.232] (II) Loading extension NV-GLX
[    12.272] (==) NVIDIA(0): Disabling shared memory pixmaps
[    12.272] (==) NVIDIA(0): Backing store disabled
[    12.272] (==) NVIDIA(0): Silken mouse enabled
[    12.272] (==) NVIDIA(0): DPMS enabled
[    12.272] (II) Loading extension NV-CONTROL
[    12.272] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "DFP", but no
[    12.272] (WW) NVIDIA(0):     such display device could be found, or all display devices
[    12.272] (WW) NVIDIA(0):     by that name are currently unavailable.
[    12.272] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
[    12.272] (WW) NVIDIA(0):     display device could be found, or all display devices by
[    12.272] (WW) NVIDIA(0):     that name are currently unavailable.
[    12.272] (II) Loading extension XINERAMA
[    12.272] (II) Loading sub module "dri2"
[    12.272] (II) LoadModule: "dri2"
[    12.273] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    12.273] (II) Module dri2: vendor="X.Org Foundation"
[    12.273]     compiled for 1.11.3.901, module version = 1.2.0
[    12.273]     ABI class: X.Org Server Extension, version 6.0
[    12.273] (II) NVIDIA(0): [DRI2] Setup complete
[    12.273] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    12.273] (==) RandR enabled
[    12.273] (II) Initializing built-in extension Generic Event Extension
[    12.273] (II) Initializing built-in extension SHAPE
[    12.273] (II) Initializing built-in extension MIT-SHM
[    12.273] (II) Initializing built-in extension XInputExtension
[    12.273] (II) Initializing built-in extension XTEST
[    12.273] (II) Initializing built-in extension BIG-REQUESTS
[    12.273] (II) Initializing built-in extension SYNC
[    12.273] (II) Initializing built-in extension XKEYBOARD
[    12.273] (II) Initializing built-in extension XC-MISC
[    12.273] (II) Initializing built-in extension SECURITY
[    12.273] (II) Initializing built-in extension XINERAMA
[    12.273] (II) Initializing built-in extension XFIXES
[    12.273] (II) Initializing built-in extension RENDER
[    12.273] (II) Initializing built-in extension RANDR
[    12.273] (II) Initializing built-in extension COMPOSITE
[    12.273] (II) Initializing built-in extension DAMAGE
[    12.273] (II) SELinux: Disabled on system
[    12.274] (II) Initializing extension GLX
[    12.647] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    12.647] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.647] (II) LoadModule: "evdev"
[    12.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    12.658] (II) Module evdev: vendor="X.Org Foundation"
[    12.659]     compiled for 1.11.0, module version = 2.6.0
[    12.659]     Module class: X.Org XInput Driver
[    12.659]     ABI class: X.Org XInput driver, version 13.0
[    12.659] (II) Using input driver 'evdev' for 'Power Button'
[    12.659] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    12.659] (**) Power Button: always reports core events
[    12.659] (**) Power Button: Device: "/dev/input/event2"
[    12.659] (--) Power Button: Found keys
[    12.659] (II) Power Button: Configuring as keyboard
[    12.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    12.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    12.659] (**) Option "xkb_rules" "evdev"
[    12.659] (**) Option "xkb_model" "pc105"
[    12.659] (**) Option "xkb_layout" "pl"
[    12.688] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    12.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.688] (II) Using input driver 'evdev' for 'Power Button'
[    12.688] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    12.688] (**) Power Button: always reports core events
[    12.688] (**) Power Button: Device: "/dev/input/event1"
[    12.688] (--) Power Button: Found keys
[    12.688] (II) Power Button: Configuring as keyboard
[    12.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    12.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    12.688] (**) Option "xkb_rules" "evdev"
[    12.688] (**) Option "xkb_model" "pc105"
[    12.688] (**) Option "xkb_layout" "pl"
[    12.689] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event4)
[    12.689] (**) A4Tech PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
[    12.689] (II) Using input driver 'evdev' for 'A4Tech PS/2+USB Mouse'
[    12.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    12.689] (**) A4Tech PS/2+USB Mouse: always reports core events
[    12.689] (**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event4"
[    12.689] (--) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
[    12.689] (--) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
[    12.689] (--) A4Tech PS/2+USB Mouse: Found relative axes
[    12.689] (--) A4Tech PS/2+USB Mouse: Found x and y relative axes
[    12.689] (II) A4Tech PS/2+USB Mouse: Configuring as mouse
[    12.689] (II) A4Tech PS/2+USB Mouse: Adding scrollwheel support
[    12.689] (**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
[    12.689] (**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    12.689] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input4/event4"
[    12.689] (II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE, id 8)
[    12.689] (II) A4Tech PS/2+USB Mouse: initialized for relative axes.
[    12.689] (**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
[    12.689] (**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
[    12.689] (**) A4Tech PS/2+USB Mouse: (accel) acceleration factor: 2.000
[    12.689] (**) A4Tech PS/2+USB Mouse: (accel) acceleration threshold: 4
[    12.689] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse0)
[    12.689] (II) No input driver/identifier specified (ignoring)
[    12.689] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event5)
[    12.690] (II) No input driver/identifier specified (ignoring)
[    12.690] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    12.690] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    12.690] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    12.690] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    12.690] (**) AT Translated Set 2 keyboard: always reports core events
[    12.690] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    12.690] (--) AT Translated Set 2 keyboard: Found keys
[    12.690] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    12.690] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    12.690] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    12.690] (**) Option "xkb_rules" "evdev"
[    12.690] (**) Option "xkb_model" "pc105"
[    12.690] (**) Option "xkb_layout" "pl"
[    12.690] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    12.690] (II) No input driver/identifier specified (ignoring)

ArnVaker · 2012-02-10 13:21:28

Kod:

[    12.166] (WW) NVIDIA(0): No valid modes for "1280x1024_60"; removing.
[    12.166] (WW) NVIDIA(0): 
[    12.166] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[    12.166] (WW) NVIDIA(0):     "nvidia-auto-select".
[    12.166] (WW) NVIDIA(0): 
[    12.166] (II) NVIDIA(0): Validated modes:
[    12.166] (II) NVIDIA(0):     "nvidia-auto-select"
[    12.166] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768

No ciekawe… Próbuje "1280x1024_60", ale ją odrzuca. W ogóle kiedykolwiek miałeś na tym monitorze wyższą rozdzielczość?

cypi44 · 2012-02-10 13:25:27

Miałem. Udało mi się taką ustawić na sterownikach do ATI, zarówno na Ubuntu jak i Windows 7. Było z tym dużo kombinacji ale ostatecznie działała taka rozdzielczość.

ArnVaker · 2012-02-10 13:45:17

Strzał, ale spróbuj na takim:

Kod:

Section "Monitor"
    Identifier     "Configured Monitor"
    Option         "metamodes" "1280x1024_60"
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "UseEDID" "false"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Monitor        "Configured Monitor"
EndSection

(mam na myśli wyłączenie użycia EDID, jakby ktoś przeoczył ;))

Jacekalex · 2012-02-10 15:38:04

Mój xorg.conf z poprzedniego monitora:
Nie próbuj go użyć, jeśli Twój nie wyrabia takich parametrów, bo może się to skończyć w serwisie.
Ten monitorek ostatnio chodził na 1280x1024@120Hz.

Jest tutaj: http://jacekalex.sh.dug.net.pl/xorg.conf

Pozdro
;-)

Ostatnio edytowany przez Jacekalex (2012-02-10 15:44:41)

cypi44 · 2012-02-11 21:53:53

Po zrobieniu jak mówisz doszła mi rozdzielczość 1152x864.
Próbowałem samemu poeksperymentować i do standardowego xorga dodałem Twój wpis i stary sposób.

Kod:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 290.10  (pbuilder@cake)  Wed Nov 23 12:20:24 UTC 2011

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 290.10  (pbuilder@cake)  Wed Nov 23 11:33:47 UTC 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung"
    HorizSync       30.0 - 61.0
    VertRefresh     50.0 - 75.0
    ModeLine       "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8500 GT"
    Option         "UseEDID" "false"

EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select @1280x1024 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

1280x960 1440x900 takie rozdzielczości doszły i działają. :O

fervi · 2012-02-11 22:26:16

To zamknięty temat?

Na pewno w nvidia-settings można ustawić rozdzielczości - na moim laptopie wyższe niż laptop obsługuje (ale nie wiem czy działają :D)

Fervi

cypi44 · 2012-02-11 22:31:11

Nie zamknięty. Cały czas próbuję uzyskać 1280x1024. W nvidia-settings pojawiły były tylko 1360x768, 1024x768 i niższe. Po tej zmianie w xorg, doszły 1280x960 i 1440x900.

ArnVaker · 2012-02-12 00:48:22

Na takim zobacz:

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 81.0
        VertRefresh      56.0 - 75.0
        Option          "metamodes" "1280x1024_60"
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Option          "UseEDIDFreqs" "false"
EndSection

cypi44 · 2012-02-12 02:01:32

Na takim nic nie pomogło. Za to znów pokombinowałem i udało się.
Osiągnąłem 1280x1024 z odświeżaniem 58Hz.

Kod:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 290.10  (pbuilder@cake)  Wed Nov 23 12:20:24 UTC 2011

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 290.10  (pbuilder@cake)  Wed Nov 23 11:33:47 UTC 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung"
    HorizSync       30.0 - 61.0
    VertRefresh     50.0 - 75.0
    Modeline "1280x1024_58.00"  104.25  1280 1360 1488 1696  1024 1027 1034 1061 -hsync +vsync



Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8500 GT"
    Option         "UseEDID" "false"    
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024 +0 +0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Edit:
Nie dawało mi to spokoju, więc jeszcze pokombinowałem.

Kod:

Section "Monitor"
        Identifier      "Configured Monitor"
        HorizSync        30.0 - 81.0
        VertRefresh      56.0 - 75.0
        
EndSection

Section "Device"
        Identifier      "Configured Video Device"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"

    Option          "UseEDID" "false"
    Option          "metamodes" "1280x1024"
EndSection

Teraz mogę ustawić 1280x1024 z odświeżaniem 60Hz lub 75Hz. Mogę nawet ustawić 1920x1200, ale aż tak szaleć nie potrzebuję...
Cel osiągnięty, problem rozwiązany.
Bardzo dziękuję za pomoc. :)

Ostatnio edytowany przez cypi44 (2012-02-12 02:10:17)

qluk · 2012-02-12 03:24:32

Na przyszłość: Kup lepszy kabel Dsub w którym wszystkie istotne piny są połączone w tym te od transmisji parametrów.

cypi44 · 2012-02-12 11:04:33

Testowane na dwóch d-subach i jednym dvi z przejściówką. :P

cypi44 · 2012-03-05 17:07:18

Niestety muszę odświeżyć temat. Przesiadłem się na inny sprzęt, został tylko stary monitor. Posiadam teraz grafikę zintegrowaną na procesorze Celeron G530. Oczywiście próbowałem korzystać z wcześniejszych rozwiązań niestety w żaden sposób nie mogę wyłączyć EDID. W logu nawet nie ma informacji o próbie rozdzielczości większej niż 1024x768.

Ostatnio edytowany przez cypi44 (2012-03-05 17:07:33)

cypi44 · 2012-06-07 11:17:56

Trochę już czasu minęło od ostatniego posta, ale udało mi się rozwiązać problem.
Może w przyszłości się komuś to przyda.

Kod:

Section "Monitor"
        Identifier      "Monitor0"
        HorizSync        28.0 - 78.0
        VertRefresh      50.0 - 76.0
       
EndSection

Section "Device"
        Identifier      "Card0"
        Driver          "vesa"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Monitor0"
    Device         "Card0"
        DefaultDepth    24
    SubSection "Display"
                Depth     24
                Modes    "1280x1024"
        EndSubSection
EndSection

I jeszcze tak w ramach ciekawostki powiem, że próbowałem instalować różne systemy. Ani "przyjazny użytkownikowi" Ubuntu ani Mint nie radziły sobie z automatycznym dostosowaniem ustawień pod moją grafikę i monitor. Za po PC-BSD9 bez żadnych kombinacji zaskoczył mnie rozdzielczością 1280x1024.

marcin'82 · 2012-06-07 11:49:00

Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 78.0
VertRefresh 50.0 - 76.0

EndSection

To musi być zgodne ze specyfikacją monitora i powinno banglać ;] (przydało mi się takie rozwiązanie bodajże w Ubuntu 7.04).

cypi44 · 2012-06-07 12:16:06

Nie wiem tylko jak mogłem dojść do tych wartości, w jaki sposób je odczytać.

ArnVaker · 2012-06-07 12:50:50

Dla Twojego monitora niby są takie jak w poście 16 podałem (gdzieś w sieci wtedy znalazłem).

arturek · 2012-06-07 13:09:26

tu jest dobry sposób na odczytanie tych wartości
http://www.cyberciti.biz/faq/howto-use-linux-ddcprobe-command/

Forum Debian Users Gang

Ogłoszenie

#1 2012-02-09 18:16:26

cypi44 - Użytkownik

Wymuszenie wyższej rozdzielczości.

#2 2012-02-09 18:17:20

ArnVaker - Kapelusznik

Re: Wymuszenie wyższej rozdzielczości.

#3 2012-02-09 18:42:14

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#4 2012-02-09 18:47:43

yossarian - Szczawiożerca

Re: Wymuszenie wyższej rozdzielczości.

#5 2012-02-09 19:04:55

ArnVaker - Kapelusznik

Re: Wymuszenie wyższej rozdzielczości.

cypi44 napisał(-a):

#6 2012-02-09 19:17:03

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#7 2012-02-09 19:18:57

ArnVaker - Kapelusznik

Re: Wymuszenie wyższej rozdzielczości.

#8 2012-02-10 13:07:02

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#9 2012-02-10 13:21:28

ArnVaker - Kapelusznik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#10 2012-02-10 13:25:27

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#11 2012-02-10 13:45:17

ArnVaker - Kapelusznik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#12 2012-02-10 15:38:04

Jacekalex - Podobno człowiek...;)

Re: Wymuszenie wyższej rozdzielczości.

#13 2012-02-11 21:53:53

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#14 2012-02-11 22:26:16

fervi - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#15 2012-02-11 22:31:11

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#16 2012-02-12 00:48:22

ArnVaker - Kapelusznik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#17 2012-02-12 02:01:32

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

Kod:

#18 2012-02-12 03:24:32

qluk - Pan inż. Cyc

Re: Wymuszenie wyższej rozdzielczości.

#19 2012-02-12 11:04:33

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#20 2012-03-05 17:07:18

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#21 2012-06-07 11:17:56

cypi44 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

Kod:

#22 2012-06-07 11:49:00

marcin'82 - Użytkownik

Re: Wymuszenie wyższej rozdzielczości.

#23 2012-06-07 12:16:06

cypi44 - Użytkownik