Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2011-11-18 10:56:41

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

Witam.
Na wstępie powiem, że instalowałem już najróżniejsze sterowniki, zarówno te z repozytorium jak i te ze strony ati, próbowałem nawet instalować przez skrypt sgfxi.
O co chodzi, a no o to, że nie mogę zmienić rozdzielczości ekranu. Po wygenerowaniu ,,modeline'' przez xrandr, nie mogę przełączyć się na tą rozdzielczość.

Trochę faktów:
Debian 6 (Squeeze)
Sterowniki ATI oznaczone wersją 11-11

Kod:

hiroshima@hiroshima-amxx:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1280 x 1280
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
CRT1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 330mm x 250mm
   1024x768       85.0*    75.0     70.1     60.0  
   800x600        85.1     72.2     75.0     60.3     56.2  
   640x480        85.0     75.0     72.8     59.9  
hiroshima@hiroshima-amxx:~$ xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
hiroshima@hiroshima-amxx:~$ xrandr --addmode CRT1 "1280x1024_60.00"
hiroshima@hiroshima-amxx:~$ xrandr --output CRT1 --mode "1280x1024_60.00"
xrandr: Configure crtc 0 failed
hiroshima@hiroshima-amxx:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1280 x 1280
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
CRT1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 330mm x 250mm
   1024x768       85.0*    75.0     70.1     60.0  
   800x600        85.1     72.2     75.0     60.3     56.2  
   640x480        85.0     75.0     72.8     59.9  
   1280x1024_60.00   59.9

Kod:

hiroshima@hiroshima-amxx:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Radeon HD 5670
OpenGL version string: 4.1.11251 Compatibility Profile Context

Kod:

uname -a
Linux hiroshima-amxx 2.6.32-5-686 #1 SMP Mon Oct 3 04:15:24 UTC 2011 i686 GNU/Linux

/etc/apt/sources.list:

Kod:

deb http://ftp.pl.debian.org/debian/ squeeze main non-free contrib
deb-src http://ftp.pl.debian.org/debian/ squeeze main non-free contrib
deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free
deb http://ftp.pl.debian.org/debian/ squeeze-updates main non-free contrib
deb-src http://ftp.pl.debian.org/debian/ squeeze-updates main non-free contrib
deb http://deb.opera.com/opera/ stable non-free
deb http://www.debian-multimedia.org squeeze main non-free
deb-src http://www.debian-multimedia.org squeeze main non-free

xorg.conf:

Kod:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "dbe"
    Load  "glx"
    Load  "dri"
    Load  "dri2"
    Load  "extmod"
    Load  "record"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    #DisplaySize      330   250    # mm
    Identifier   "Monitor0"
    VendorName   "DWE"
    ModelName    "710B"
    HorizSync    30.0 - 69.0
    VertRefresh  50.0 - 160.0
    Option        "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "CustomEDID"             # [<str>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ClockGating"            # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
        #Option     "ForceLowPowerMode"      # [<bool>]
        #Option     "DynamicPM"              # [<bool>]
        #Option     "NewPLL"                 # [<bool>]
        #Option     "ZaphodHeads"            # <str>
    Identifier  "Card0"
    Driver      "fglrx"
    VendorName  "ATI Technologies Inc"
    BoardName   "Redwood [Radeon HD 5670]"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
        Modes   "1280x1024" "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes    "1280x1024" "1024x768" "800x600"
    EndSubSection
EndSection

Section "Extensions"
        Option      "Composite" "enable"
#       Option      "RENDER"    "disable"
EndSection

Xorg w aktualnej wersji, nagłówki jądra pobrane
Załamuje już ręce, na rozdzielczości 1024x768 nie da się pracować po prostu. Bardzo chciałbym móc ustawić 1280x1024

Log xorga:

Kod:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux hiroshima-amxx 2.6.32-5-686 #1 SMP Mon Oct 3 04:15:24 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=a88e6475-134d-4152-bcac-b227c11b45a4 ro quiet nomodeset radeon.modeset=0
Build Date: 19 February 2011  02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 17 11:04:25 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 8

(--) PCI:*(0:1:0:0) 1002:68d8:1787:200b ATI Technologies Inc Redwood [Radeon HD 5670] rev 0, Mem @ 0xd0000000/268435456, 0xe1000000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="Advanced Micro Devices, Inc."
    compiled for 6.9.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.91.4
    Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.91.4
(II) ATI Proprietary Linux Driver Version Identifier:8.91.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.911                                
(II) ATI Proprietary Linux Driver Build Date: Oct 25 2011 21:24:02
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x68D8) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x9a9fcc8
(II) fglrx(0): === [xdl_x750_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(==) fglrx(0): Depth 24, (==) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "ATI Radeon HD 5670" (Chipset = 0x68d8)
(--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x200b)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe1000000
(--) fglrx(0): I/O port at 0x0000c000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.20
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: REDWOOD
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(II) fglrx(0): Interrupt handler installed at IRQ 28.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output DFP1 using monitor section Monitor0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP3 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: CRT1
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DWE  Model: 7103  Serial#: 16843009
(II) fglrx(0): Year: 1999  Week: 36
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 25
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.625 redY: 0.340   greenX: 0.285 greenY: 0.605
(II) fglrx(0): blueX: 0.150 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@87Hz (interlaced)
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) fglrx(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #3: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) fglrx(0): Serial No: GC98H70097
(II) fglrx(0): Monitor name: 710B
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 69 kHz, PixClock max 95 MHz
(II) fglrx(0):  DAEWOO
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff0012e5037101010101
(II) fglrx(0):     2409010168211978e800b2a057499b26
(II) fglrx(0):     10484fafde0081806159455931590101
(II) fglrx(0):     010101010101000000ff004743393848
(II) fglrx(0):     37303039370a2020000000fc00373130
(II) fglrx(0):     42000a20202020202020000000fd0032
(II) fglrx(0):     a01e4509000a202020202020000000fe
(II) fglrx(0):     00444145574f4f000a202020202000d5
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): EDID for output DFP1
(II) fglrx(0): EDID for output DFP2
(II) fglrx(0): EDID for output DFP3
(II) fglrx(0): EDID for output CRT1
(II) fglrx(0): Manufacturer: DWE  Model: 7103  Serial#: 16843009
(II) fglrx(0): Year: 1999  Week: 36
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 25
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.625 redY: 0.340   greenX: 0.285 greenY: 0.605
(II) fglrx(0): blueX: 0.150 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@87Hz (interlaced)
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) fglrx(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #3: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) fglrx(0): Serial No: GC98H70097
(II) fglrx(0): Monitor name: 710B
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 69 kHz, PixClock max 95 MHz
(II) fglrx(0):  DAEWOO
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff0012e5037101010101
(II) fglrx(0):     2409010168211978e800b2a057499b26
(II) fglrx(0):     10484fafde0081806159455931590101
(II) fglrx(0):     010101010101000000ff004743393848
(II) fglrx(0):     37303039370a2020000000fc00373130
(II) fglrx(0):     42000a20202020202020000000fd0032
(II) fglrx(0):     a01e4509000a202020202020000000fe
(II) fglrx(0):     00444145574f4f000a202020202000d5
(II) fglrx(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x960" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x960" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x720" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1280x720" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "1024x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "800x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using mode "640x480" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Printing probed modes for output CRT1
(II) fglrx(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x600"x59.0   49.00  1024 1072 1168 1312  600 603 613 624 +hsync -vsync (37.3 kHz)
(II) fglrx(0): Modeline "800x600"x85.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP3 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output CRT1 using initial mode 1024x768
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Eyefinity capable adapter detected.
(II) fglrx(0): Adapter ATI Radeon HD 5670 has 4 configurable heads and 1 displays connected.
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 13, (OK)
ukiOpenByBusid: ukiOpenMinor returns 13
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2ec0000
(II) fglrx(0): [uki] mapped SAREA 0x2ec0000 to 0xb7745000
(II) fglrx(0): [uki] framebuffer handle = 0x2ec1000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.91.4
(II) fglrx(0):     Date: Oct 25 2011
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.32-5-686
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [uki] register handle = 0x02ec2000
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 592
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 2.0.0
(II) Loading extension AMDXVOPL
(II) Loading extension AMDXVBA
[-     XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
(II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 14, (OK)
ukiOpenByBusid: ukiOpenMinor returns 14
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
SELinux: Disabled on system, not enabling in X server
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device SONiX USB Device (/dev/input/event4)
(**) SONiX USB Device: Applying InputClass "evdev pointer catchall"
(**) SONiX USB Device: always reports core events
(**) SONiX USB Device: Device: "/dev/input/event4"
(II) SONiX USB Device: Found 9 mouse buttons
(II) SONiX USB Device: Found scroll wheel(s)
(II) SONiX USB Device: Found relative axes
(II) SONiX USB Device: Found x and y relative axes
(II) SONiX USB Device: Configuring as mouse
(**) SONiX USB Device: YAxisMapping: buttons 4 and 5
(**) SONiX USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "SONiX USB Device" (type: MOUSE)
(II) SONiX USB Device: initialized for relative axes.
(II) config/udev: Adding input device SONiX USB Device (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(0): EDID vendor "DWE", prod id 28931
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): EDID vendor "DWE", prod id 28931
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): EDID vendor "DWE", prod id 28931
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): EDID vendor "DWE", prod id 28931
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)

Kod:

hiroshima@hiroshima-amxx:~$ lspci -n
00:00.0 0600: 8086:29c0 (rev 02)
00:01.0 0604: 8086:29c1 (rev 02)
00:1b.0 0403: 8086:27d8 (rev 01)
00:1c.0 0604: 8086:27d0 (rev 01)
00:1c.1 0604: 8086:27d2 (rev 01)
00:1d.0 0c03: 8086:27c8 (rev 01)
00:1d.1 0c03: 8086:27c9 (rev 01)
00:1d.2 0c03: 8086:27ca (rev 01)
00:1d.3 0c03: 8086:27cb (rev 01)
00:1d.7 0c03: 8086:27cc (rev 01)
00:1e.0 0604: 8086:244e (rev e1)
00:1f.0 0601: 8086:27b8 (rev 01)
00:1f.2 0101: 8086:27c0 (rev 01)
00:1f.3 0c05: 8086:27da (rev 01)
01:00.0 0300: 1002:68d8
01:00.1 0403: 1002:aa60
03:00.0 0200: 10ec:8168 (rev 02)

Kod:

hiroshima@hiroshima-amxx:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5670]
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)

Kod:

hiroshima@hiroshima-amxx:~$ dpkg --print-architecture
i386

Dodam tylko, że przed instalacją sterowników wykrywało monitor na DVI-1 (wtedy mogłem ustawić tą rozdzielczość przez xrandr).


Udało mi się dojść do tego, że problem jest po stronie EDID, ustawiłem w xorg.conf w sekcji ,,Device'':

Kod:

Option "IgnoreEDID" "true"

Ale to też nie do końca rozwiązuje mój problem, teraz maksymalna rozdzielczość jaką mogę ustawić to 1280x800 i powiem szczerze, że wygląda to śmiesznie.

Może coś w CustomEDID? Nie chciałbym niczego zepsuć.


Sprawdziłem na sterowniku ,,ati'' i działa. Na fglrx nie mogę ustawić tej rozdzielczości. Zwariowałem...


Odnośnie DVI-0...

Kod:

hiroshima@hiroshima-amxx:~$ xrandrScreen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1600
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1280x1024      59.9*+   60.0  
   1600x1024      60.2  
   1440x900       59.9  
   1280x960       60.0  
   1360x768       59.8  
   1152x864       60.0  
   1024x768       60.0     59.9  
   800x600        60.3     59.9  
   640x480        59.9  
hiroshima@hiroshima-amxx:~$ glxgears
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  129 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

Odinstalowałem sterowniki fglrx i obecnie rozdzielczość można już ustawić korzystając ze sterownika 'ati'. Nie rozumiem tylko dlaczego teraz wyjście wideo oznaczone jest jako DVI-0 a na sterownikach ,,fglrx'' jest to CRT1.
Oczywiście obecnie polecenie glxgears daje wynik ~120FPS.

Musi chyba być jakieś rozwiązanie, żeby wszystko działało jak należy?

Pozdrawiam

Ostatnio edytowany przez hiroshima (2011-11-18 10:59:18)

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#2  2011-11-18 16:56:07

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

Możesz spróbować nowszej wersji Xorga (instrukcja: http://x.debian.net/reference/squeeze-backports.html) i/lub kernela, ale to jeśli nikt nic sensownego nie doradzi… Problem w tym, że tu ludzie albo nie mają Radeonów, albo się nie przyznają. ;) Generalnie nikt nic o nich nie wie. O.o „Co to Radeon?”

Offline

 

#3  2011-11-18 18:08:41

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

powiem szczerze, że jest to bardzo dziwne... na żadnych ze sterowników fglrx nie mogę zmienić rozdzielczości na większą niż 1024x768 bez wpisania opcji IgnoreEDID, ale tak czy inaczej, nie mogę ustawić tej co chcę. Dopiero po zmianie sterownika z fglrx na ati problem ustępuje... Jednak wydajność pozostawia wiele do życzenia wtedy...

Innymi słowy - tak źle i tak niedobrze.

Może ktoś coś jeszcze wymyśli? :>

czy może mieć to związek z wyjściem? nie rozumiem, dlaczego na sterownikach fglrx wykrywa monitor na CRT1 a na sterach 'ati' na DVI-0. O_o

Ostatnio edytowany przez hiroshima (2011-11-19 10:03:02)

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#4  2011-11-21 23:50:16

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

odświeżam, może ktoś się zlituje ^^

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#5  2011-11-22 11:20:15

  urbinek - Dzban Naczelny

urbinek
Dzban Naczelny
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

tak jak napisał ArnVaker, nikt tutaj niema ati albo wstyd mu sie przyznać x)
ta firma niestety ma tragiczne wsparcie i są takie akcje, że trzeba żonglować sterownikami między fglx a ati
najprościej kupić coś z nvidi ale to nie rozwiązanie tylko ominięcie
spróbuj jeszcze z innym xorgiem

A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#6  2011-11-23 00:34:47

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

no dobra, dzięki, ale kupno innej karty graficznej nie wchodzi w gre :>

Spróbuje jeszcze coś pokombinować, jak mi się uda to dam znać.

Najbardziej interesuje mnie dlaczego po instalacji sterów fglrx wykrywa mi monitor na CRT1 a nie na DVI-0 jak w przypadku, gdy korzystam ze sterownika 'ati' - da się to jakoś manualnie zmienić?

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#7  2011-11-23 02:16:12

  urbinek - Dzban Naczelny

urbinek
Dzban Naczelny
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

pewnie taka jest koncepcja programistów, podejrzewam iż nie

A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#8  2011-11-24 12:41:35

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

myślałem, żeby to zmienić przy pomocy tego: CustomEDID, lecz nie do końca wiem jak a nie chciałbym tego "popsuć"

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#9  2011-11-24 12:45:40

  urbinek - Dzban Naczelny

urbinek
Dzban Naczelny
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

tak btw, czemu ci to przeszkadza ?

A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#10  2011-11-24 13:42:31

  ArnVaker - Kapelusznik

ArnVaker
Kapelusznik
Skąd: Midgard
Zarejestrowany: 2009-05-06

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

Na nowszym kernelu i Xorgu sprawdziłeś? Nie odpisałeś nic na ten temat…

Próbowałeś wywalić /etc/ati/amdpcsdb?

Kod:

rm /etc/ati/amdpcsdb

Offline

 

#11  2011-11-24 14:33:42

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

urbinek napisał(-a):

tak btw, czemu ci to przeszkadza ?

kombinuje juz...

ArnVaker napisał(-a):

Na nowszym kernelu i Xorgu sprawdziłeś? Nie odpisałeś nic na ten temat…

po instalacji nowszego jajka, po wyłączeniu kdm mam czarny ekran... nie ma nic i nic nie mogę zrobić...

bądź tak miły i opisz krok po kroku co mam zrobić, bo już nie mam na to siły...

Kod:

root@hiroshima-amxx:/home/hiroshima# uname -a
Linux hiroshima-amxx 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686 GNU/Linux

Ostatnio edytowany przez hiroshima (2011-11-24 14:36:01)

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#12  2011-11-24 15:14:10

  urbinek - Dzban Naczelny

urbinek
Dzban Naczelny
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

hiroshima napisał(-a):

po instalacji nowszego jajka, po wyłączeniu kdm mam czarny ekran... nie ma nic i nic nie mogę zrobić...

a czego sie spodziewałeś ? włącz kdm to może będzie obraz :D?

hiroshima napisał(-a):

kombinuje juz...

ale w czym ci nazewnictwo przeszkadza ? ma to jakieś głębsze znaczenie czy tylko OCD ?

A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#13  2011-11-24 15:45:37

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

urbinek napisał(-a):

a czego sie spodziewałeś ? włącz kdm to może będzie obraz :D?

spodziewałem się trybu tekstowego z wyłączonymi X'ami, debilem nie jestem
a jak już napisałem, zobaczyłem czarny ekran, a monitor się wyłączył

urbinek napisał(-a):

ale w czym ci nazewnictwo przeszkadza ? ma to jakieś głębsze znaczenie czy tylko OCD ?

Jesteś pewny, że to tylko nazewnictwo? Do tego właśnie zmierzam...

Kod:

hiroshima@hiroshima-amxx:~$ xrandr --output CRT1 --mode "1280x1024_60.00"
xrandr: Configure crtc 0 failed

Gdy jest na sterowniku ATI i wykrywa DVI-0 nie ma tego problemu, więc?

Ostatnio edytowany przez hiroshima (2011-11-24 15:48:33)

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

#14  2011-11-24 16:28:51

  urbinek - Dzban Naczelny

urbinek
Dzban Naczelny
Skąd: Sosnowiec
Zarejestrowany: 2009-10-01
Serwis

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

lol, problem polega na tym, że nie może go skonfigurować a ie na tym, ze źle sie nazywa
zamień CRT1 na CRT0 albo wogóle usuń --output, nigdy tego nie używałem

also na tty7+ po wyłączenie xorga jest czarny ekran, konsola jest na tty1-6, przełacz sie na którąś - crt+alt+f1-6

p.s.
30 sekund guglarki http://ubuntuforums.org/showthread.php?t=1322095 po wpisaniu xrandr: Configure crtc 0 failed
problem wyglada na podobny

A w wolnym czasie, robię noże :)
http://nginx.urbinek.eu/_photos/signature.png

Offline

 

#15  2011-11-25 15:55:36

  hiroshima - Użytkownik

hiroshima
Użytkownik
Zarejestrowany: 2011-11-18

Re: Problem z ustawieniem większej rozdzielczości na sterowniku fglrx

urbinek napisał(-a):

lol, problem polega na tym, że nie może go skonfigurować a ie na tym, ze źle sie nazywa
zamień CRT1 na CRT0 albo wogóle usuń --output, nigdy tego nie używałem

also na tty7+ po wyłączenie xorga jest czarny ekran, konsola jest na tty1-6, przełacz sie na którąś - crt+alt+f1-6

czy z --output czy bez jest to samo... już wcześniej tego próbowałem... I już wcześniej pisałem, że nie wiem skąd się wzieło to CRT na sterowniku fglrx... na sterowniku ATI jest DVI-0

urbinek napisał(-a):

p.s.
30 sekund guglarki http://ubuntuforums.org/showthread.php?t=1322095 po wpisaniu xrandr: Configure crtc 0 failed
problem wyglada na podobny

byłoby fajnie, gdyby nie dotyczyło to laptopa z kartą zintegrowaną. Moja karta jest na wejściu PCI-E a nie AGP... poza tym dotyczy to sterownika 'radeon'

Ostatnio edytowany przez hiroshima (2011-11-25 15:57:36)

http://forum.dug.net.pl/viewtopic.php?pid=185995#p185995

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)